MiDiPLUS MI3S 3 Inch High Quality Near Field Monitor Speakers User Manual
- June 3, 2024
- Midiplus
Table of Contents
MiDiPLUS MI3S 3 Inch High Quality Near Field Monitor Speakers User
Thanks for purchasing MI3S. MI3S is a near field monitor with high performance, wide range of frequency response, high efficiency, low heat and small size. Use Class-D amplifier, built in Bluetooth 4.0 module, can transmit real 16-bit/44.1kHz CD level audio. This manual can help you to know functions and operation methods of MI3S quickly, Please keep it safe for your reference.
Product features
- Superior performance, high power output and exceptional accuracy are the outstanding features of the MI3S.
- 3 inch active monitors with rear inverted tube, bookshelf speaker designed and built-in Bluetooth.
- Volume control range from -30dB ~ 0dB
- -2dB ~ +1dB,4 Level High frequency adjustment
- RCA input, AUX input and Bluetooth audio
Volume Control
“VOLUME” knob in the rear panel control the volume from -30dB ~ 0dB, factory default is -30dB. Counter clockwise to turn down the volume, and clockwise to turn up the volume.
High Frequency adjustment
“HF LEVEL”in the rear panel, the toggle switch with 4 positions is for High frequency adjustment, turning range: -2dB, -1dB, 0dB, +1dB; Factory default is 0dB.
Audio Inputs
RCA (Unbalanced) input, Aux input, Bluetooth (The default PIN is 0000)
The Right Speaker connector
TO RIGHT SPEAKER: Connect to the Right speaker through the included speaker cable.
Power Supply
Power input: 100-220V~,50/60Hz, 60W. The power switch locates under the rear panel, please refer to the power mark in the rear panel.
Notes
- Do not open or remove the rear panel of the device to avoid electric shock.
- Do not trample, squeeze or break the power cord to ensure safety.
- Do not place any liquid filled utensils, such as vases, on the equipment.
- Do not place any open flame on the device, such as candles.
- Do not use the device in thunderstorm weather to avoid lightning damage.
- Do not contact the device with water or moisture. Do not be exposed to rain or water splashing, to prevent short circuit hazard caused by water inflow.
- Do not use the device near any heat source, such as electric heater, electric blanket or other equipment that generates heat.
- Please place the equipment in a well-ventilated and dry environment for use.
- When not in use for a long time, please unplug the power cord plug from the power socket.
- Long-term use of excessive volume may cause permanent hearing damage, please pay attention to protect your hearing.
- If the equipment needs to be transported, it is recommended to use the original packaging carton, in order to protect the box more effectively.
- The equipment uses a switching device as a disconnecting device and should be kept easy to operate.
- The equipment is only suitable for use in areas below 2000m above sea level. The equipment is only suitable for safe use in non-tropical climate conditions.
Product specifications
Contents | MI3S |
---|
FType ency
requ
| 2-Way Active Monitor
response(-3dB)| 70Hz-25kHz
Max SPL@1m| 98dB
HF driver| 3/4”silk-dome
LF driver| 3”fiberglass woven cone
Frequency points| 2.0kHz
Amplifier type| Class-D
Amplifier qty| 4
S(otannedpbayirp) ower| 4.8W
H(1Fpoc)utput power| 10W
L(1Fpocu) tput power| 20W
T(1otpaalior)utput power High frequency| 80W(Peak),60W(RMS)
adjustment| -2dB, -1dB, 0dB, 1dB@2.5khz above
Jack| 12/x8”RsCteArUnbinaplauntced input
4-pin speaker output
Bluetooth v4.0,
Bluetooth| Compatible with A2DP protocol
Dimensions(mm)| 152 x 119 x 165
Net weights(kg)| 3.1kg (Main:1.77kg,Sub:1.33kg)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>