VIDEX VLE-CLR LED Ceiling Fixture Instruction Manual
- June 8, 2024
- VIDEX
Table of Contents
VIDEX VLE-CLR LED Ceiling Fixture Instruction Manual
LED CEILING FIXTURE
- Rated voltage, frequency.
- Rated power.
- Rated luminous flux. 31. Luminous flux of luminaries 3.2. Luminous flux of light source (360°). 3.3. This product contains a light source of energy efficiency class.
- Color temperature.
- Not compatible with lighting dimmer.
- Color Rendering Index.
- Beam angle of luminaries.
- Nominal lifetime.
- Protection against solid foreign objects bigger than 1,0mm provided. Protection against splashing water provided.
- ON/OFF cycles.
- No perceptible flicker to the human eye.
- Ultraviolet-free.
- Mercury-free.
- Compliance with standards of ecodesign and energy labeling in force from Sep 01, 2021.
- Working temperature.
- Product meets requirements of EU directives.
- The minimum distance from the illuminated object.
- Class I. A product in which protection against electric shock is provided not only by means of basic insulation but also through additional safety measures, i.e. extra protective circuit to which protective conductor of the fixed feeding installation needs to be connected.
- Product can be installed and operated in/on a surface made of materials which are normally flammable.
- Replace the defective lamp cover immediately. Don’t use the product if the outer bulb is cracked or broken.
- LED light source can be replaceable by the manufacturer’s authorized person.
- The control gear can be replaceable by the manufacturers authorized person.
- For indoor use only.
ENVIRONMENTAL PROTECTION.
24. Pursuant to the provisions of the WEEE Act, ft is forbidden to put waste equipment marked with the symbol of a crossed bin together with other waste. The user, wishing to get rid of electronic and electrical equipment, is obliged to return it to a waste equipment collection point There are no hazardous components in the equipment that have a particularly negative impact on the environment and human health.
PRODUCT’S PURPOSE AND APPUCATION
This product is intended for general lighting in a home space as well as other indoor spaces.
INSTALLATION INSTRUCTIONS
Installation must be performed by an electrician or authorized person. Read the users manual prior installation. The light source and control gear are an integral unit. Individual elements cannot work separately. Any assembly or maintenance activities to be done with power supply OFF. To install the LED fixture:
- Unscrew the luminaire diffuser counterclockwise (Fig.1.1) or using the mounting clips (for square luminairesli **(Fig.1.2);
**
-
Drill the holes on the ceiling and fix the dowels in the holes (Fig2.1) , (Fig.2.2);
-
. Install the light fixture and fix the luminaire with the screws (Fig.3.1) , (Fig.3.2);
-
Connect the L N, ®wires to the – 230V, 50 / 60Hz mains using a screw terminal (Fig.4). The ends of the wires must be insulated to the appropriate length;
-
After installation, screw the luminaire diffuser clockwise (Fig.5:1) or using the mounting clips (for square luminaires) (Fig.5.2). Before the first use it is necessary to verify that mechanical installation and electric connection are carried out correctly. The manufacturer reserves the right to provide technical changes and improvements without notifying the user.
FUNCTIONAL CHARACTERISTICS
This product should be used indoor only.
MAINTENANCE & SAFETY INSTRUCTIONS
Any maintenance work must be performed when the power supply is cut OFF and the product has cooled down. Clean only with soft and dry cloths. Do not use chemical detergents. Do not cover the product. Ensure free air access. LED fixture may heat up to a higher temperature. Product can only be supplied by rated voltage or voltage within the range provided. It’s forbidden to use the product with the damaged electric wiring or places of connections. ATTENTION! Do not look directly at LED light beam. It’s forbidden to use the product with damaged cover. Product must not be used in unfavorable conditions, e.g. water, vibrations, explosive air atmosphere, fumes, or chemical fumes, etc. The light source in the luminaire can be replaced by a person authorized by the manufacturer as part of service work. If the light source is damaged, contact the manufacturer for service. Used or damaged luminaire should be disposed of in accordance with applicable regulations. Failure to follow these instructions may result in e.g. fire, burns, electrical shock, physical injury and other material and non-material damage. Allegro Opt Sp. z o.o. shall not be responsible for any damage resulting from the failure to follow these instructions. The manufacturer reserves the right to make changes in the manual.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>