VIDEX 2313 Remote Relay for VX2300 system User Manual

June 8, 2024
VIDEX

VIDEX 2313 Remote Relay for VX2300 system User Manual

DIMANSION PRODUCT

DIMANSION

DIMANSION

DESCRIPTION

Remote relay for VX2300 system.
All entrance panels on the VX2300 system include the lock release relay and push to exit button input inside the entrance panel. For higher security applications including installations in compliance with ‘Secured By Design’ the 2313 enables the relay and push to exit button input 1 to be installed in a secure location away from the entrance. There is also a second relay that can be activate pressing the service button present in every VX2300 phone or videophone.

LEGEND
A Connection terminals covers
B Dip-switch cover
C Connection terminals
D 8 way dip-switch

  1. Remove the terminal side covers by unscrewing the retaining screws (Fig. 3).
    INSTRUCTION

  2. Fix the device to a DIN rail (Fig. 4) or directly to the wall using two expansion type screws (Fig. 5).
    INSTRUCTION
    INSTRUCTION

  3. Isolate the mains using the circuit breaker mentioned above then make the connections as shown on the installation diagrams (if provided).

  4. Check all connections and secure the wires into the terminals;

  5. When all connections are made replace and fix the terminal covers with the relevant screws (Fig. 6).
    INSTRUCTION

  6. Restore the mains.

  7. Programming is made by dip-switch D accessible by lifting up the cover B (Fig. 7).
    INSTRUCTION

PROGRAMMING RELATED TO OUTDOOR STATION ADDRESS

Switch Nr.1 Nr.2 Nr.3 Nr.4 ID
OFF OFF OFF OFF 1
ON OFF OFF OFF 2
OFF ON OFF OFF 3
ON ON OFF OFF 4
OFF OFF ON OFF 5
ON OFF ON OFF 6
OFF ON ON OFF 7
ON ON ON OFF 8
OFF OFF OFF ON 9
ON OFF OFF ON 10
OFF ON OFF ON 11
ON OFF ON ON 12
OFF OFF ON ON 13
ON OFF ON ON 14
OFF ON ON ON 15

RELAY 1 TIME
PTE teminal open Relay 1 for the setted time.

Switch Nr.5 Nr.6 Setting Up
OFF OFF = 2 seconds
OFF ON = 8 seconds
ON OFF = 16 seconds
ON ON = 32 seconds

CONNECTION TERMINALS

To access to the connection terminals, first remove both the retaining screws, then the covers A (Fig. 8).

CONNECTION TERMINALS

GND Ground
BUS1 BUS Input/Output
BUS2 BUS Input/Output
PTE Open relay 1 for the setted time

Max 24Vac/dc 5A

---|---|---
NC1| Relay 1 normally closed contact
NO1| Relay 1 normally open contact
CO1| Relay 1 common contact
NC2| Relay 2 normally closed contact
NO2| Relay 2 normally open contact
CO2| Relay 2 common contact

TECHNICAL SPECIFICATIONS

Housing/Mounting: 5 module A type DIN box DIN bar or directly to the wall
Dry contacts relay: Max 24Vac/dc 5A
Power supply: Supplied by the BUS line
Working temperature: -20 +60°C

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals