VIDEX VLE-TF05W LED Table Lamp User Manual

VLE-TF05W LED Table Lamp User Manual

VLE-TF05W LED Table Lamp

LED DIMMABLE DESK LAMP

1. Rated voltage, frequency.

2. Rated power.

3. Color temperature tunable by the lamp’s touch control (warm white, neutral white, cold white).

4. Rated luminous flux.
   41. Luminous flux of luminaire
   4.2. Luminous flux of light source (360°).
   4.3. This product contains a light source of energy efficiency class.

5. Dimmable by the lamp’s touch control.

6. Color Rendering Index.

7. Beam angle of luminaire.

8. Nominal lifetime.

9. Protection against solid foreign objects bigger than 12mm provided.

10. No perceptible flicker to the human eye.

11. Working temperature.

12. Product meets requirements of EU directives.

13. Class II. Protection against electric shock is provided not only through basic insulation, but also double or reinforced insulation.

14. Class III. A product in which protection against electric shock is provided by feeding it with very low safe voltage (SELV) with no risk of creating higher than safe voltage.

15. For indoor use only.

16. Short-circuit-proof safety isolating transformer.

17. The control gear can work independently.

18. The luminaire contains non-replaceable light source.

19. The control gear can be replaced by end user.

ENVIRONMENTAL PROTECTION

20. Pursuant to the provisions of the WEEE Act, it is forbidden to put waste equipment marked with the symbol of a crossed bin together with other waste. The user, wishing to get rid of electronic and electrical equipment, is obliged to return it to a waste equipment collection point. There are no hazardous components in the equipment that have a particularly negative impact on the environment and human health.

PRODUCT’S PURPOSE AND APPLICATION

Product designed to be used in the home and for other similar general applications.

INSTALLATION INSTRUCTIONS

Before the first use it is necessary to verify that the lamp housing, cable and adapter are not damaged (Fig. 1);
Connect the cable to the power connector of the lamp and to the adapter, then to the power supply and turn it on (Fig. 2).

Modes:

1. Standard
   Information in Standard mode: temperature, time, date (Fig. 3);

2. Alarm mode
   You can set wake-up time and select signal in Alarm mode (Fig. 4).

DETAILED DESCRIPTION

After installing the battery, the display operates in standard mode. To set the clock and calendar functions, press the «Set» button for two seconds (Fig. 5).
The «Up» and «Down» buttons are used to set the hour value (Fig. 6).
You can switch to the minute value by short pressing the «Set» button (Fig. 7).
Press the <Down» button in standard mode to select the thermometer unit system (Fig. 8).
Press the «Mode» button to complete the settings of the standard mode functions (Fig. 9).
Press the «Up» button to select the twelve or twenty-four hour time display mode (Fig. 10).
Press the «Mode» button to switch from standard mode to alarm mode (Fig. 11).
Setting the value of the alarm time is similar to setting the clock (Fig. 12).
Set the interval between signal repetitions (from 1 to 60 minutes) (Fig. 13).
Press the «Down» button in the alarm mode for the signal to work at the set time (Fig. 14).
Press the «Down» button to repeat the signal (Fig. 15). Press the «Set» button to switch off the signal of alarm (Fig. 16).
Buttons (Fig. 17):

1. Button of color temperature (warm white, neutral white, cold white)
2. Button ON / OFF
3. Button to increase the brightness of the lamp (five-step)
4. Button to decrease the brightness of the lamp (five-step)

FUNCTIONAL CHARACTERISTICS

This product should be used indoor only.

MAINTENANCE & SAFETY INSTRUCTIONS

Any maintenance work must be performed when the power supply is cut OFF and the product has cooled down. Clean only with soft and dry cloths. Do not use chemical  detergents. Do not cover the product. Ensure free air access. LED product may heat up to a higher temperature. Product with non-replaceable light source of the LED type.  Product cannot be fixed if the light source becomes damaged. Used or damaged product should be disposed of in accordance with applicable regulations.
Failure to follow these instructions may result in e.g. fire, burns, electrical shock, physical injury and other material and non-material damage. Allegro Opt Sp. z 0. 0. shall not  be responsible for any damage resulting from the failure to follow these instructions. The manufacturer reserves the right to make changes in the manual.

Allegro Opt Sp. z 0.0., Handlowa 23, 05-120
Legionowo, Poland.

Documents / Resources

| VIDEX VLE-TF05W LED Table Lamp [pdf] User Manual
VLE-TF05W LED Table Lamp, VLE-TF05W, LED Table Lamp, Table Lamp, Lamp
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>