VIDEX VL-TF20-RGB LED Floor Lamp User Manual
- June 1, 2024
- VIDEX
Table of Contents
VIDEX VL-TF20-RGB LED Floor Lamp
TECHNICAL PARAMETERS
LED AMBIENT FLOOR LIGHT
TECHNICAL PARAMETERS
- Rated power;
- Input voltage and current;
- Power interface;
- Luminous flux (white color);
- Beam angle;
- LED type and quantity;
- Remote controller;
- Remote controller operational distance;
- Ingress protection. Protection against solid objects bigger than 12mm; No moisture protection.
- LED rated resource;
- ON/OFF cycles;
- Product weight;
- Materials.
Overall dimensions (mm), operating temperatures range, production date and batch number are indicated on individual packaging.
PRODUCT’S PURPOSE AND APPLICATION
The product is intended for colorful decorative lighting. It features various pre-set scenes and also allows for manual color and behavior selection using the remote control. The product is not intended for use as a general light source.
CONTENTS (Fig. 1)
The product is delivered disassembled and requires manual assembly.
- Lampshade with light strip;
- Base;
- Control box;
- Remote controller with CR2025 battery;
- Square sleeve;
- Square cover;
- Plastic rivets 5 pcs;
- User’s manual;
- Individual packaging.
ASSEMBLY (Fig.2)
- a) Unfold the lampshade, fold it in half along the indentation, and glue it into 4 squares with double-sided tape, as shown in the figure below;
- b) Put the square sleeve into the lampshade, pay attention to the direction;
- c) Connect the light bar and the terminal wire of the control box, and then insert the light bar into the base as shown in the figure below, pay attention to the direction;
- d) Insert the square sleeve into the base as shown in the picture below;
- e) Put the end cap onto the top of the light bar, and insert 4 rivets to fix it, as shown below;
- f) Complete the assembly and plug in the controller to USB-A socket.
For a video tutorial, please scan the OR code below. [Fig. 4)
OPERATING INSTRUCTIONS
Use the remote control to operate the light (Fig,3)
- Turn on / off;
- White light: warm white or cold white;
- Brightness+ / –
- Static colors:
- Red + green colors preset;
- Orange+ purple colors preset;
- Blue+ Yellow+ Green colors preset; 7, Red + White colors preset;
- 7 single colors for chose: red, green, blue, orange, yellow, light blue, purple;
- 3 colors [red+ green+ blue);
- 7 colors (red+ green+ blue+ orange+ yellow+ light blue+ purple);
- 15 colors [red + green + blue+ orange+ dark yellow+ light yellow+ light green + cyan+ light blue+ sky blue+ dark blue+ pink+ purple+ magenta+ white);
- Rainbow chasing dynamic mode (256 colors).
- Dynamic mode speed+/- or Music mode sensitivity+/-;
- Dynamic modes. The following functions apply to the color combination previously set:
- Dynamic mode 1;
- Dynamic mode 2;
- Dynamic mode 3;
- Music recognition mode. 5 different programs to choose;
- Jump;
- Fade;
- Overlay;
- All modes change cyclically;
- Auto off-timers.
FUNCTIONAL CHARACTERISTICS
This product can only be used indoor. The product has no protection against moisture and cannot be used in damp area.
MAINTENANCE AND SAFETY INSTRUCTIONS
The product does not require maintenance. Clean only with soft and dry cloths.
Do not use chemical detergents. Any works should be carried out with the
electricity turned off. Product can only be supplied by rated voltage or the
voltage within the range provided. Do not use AC power with mismatched
voltage, which may damage the product. Do not place the product in direct
sunlight, as this may cause yellowing. Product must not be used in unfavorable
conditions, e.g. dust, water, moisture, vibrations, high temperature,
explosive air atmosphere, fumes, or chemical fumes, etc. The LED light source
inside is non-replaceable. If the light source is broken, the whole product
must be replaced, Used or damaged product should be disposed of in accordance
with applicable regulations.
Failure to follow these instructions may result into e.g. fire, burns,
electrical shock, physical injury and other material and non-material damage.
The producer shall not be responsible for any damage resulting from the
failure to follow above instructions.
STORAGE AND TRANSPORTATION
Before delivery to the direct point of sale, the product must be stored in the
manufacturer’s packaging at a temperature from -20’C to +40’C, in a dry room
and without exposure to direct sunlight.
Transportation can be carried out by land, sea, air transport in the
manufacturer’s transport packaging.
WARRANTY
The warranty period for the product is indicated on the individual packaging and begins from the date of sale, During the warranty period, a faulty product can be exchanged or returned with prove of purchase and all components and accessories preserved. The following does not apply with the scope of limited warranty:
- Misuse the product and cause the product components damage;
- Unauthorized disassemble or the presence of deep mechanical damage to the product;
- Damage due to force majeure.
The manufacturer reserves the right to make changes to these user manual or technical changes to the product without prior notice.
ENVIRONMENTAL PROTECTION
Pursuant to the provisions of the WEEE Act, it is forbidden to put waste A equipment marked with the symbol of a crossed bin together with other – waste. The user, wishing to get rid of electronic and electrical equipment, is obliged to return it to a waste equipment collection point. There are no hazardous components in the equipment that have a particularly negative impact on the environment and human health.
- www.videx.ua
- Importer: Allegro Opt Sp. z 0.0., Handlowa 23, 05-120 Legionowo, Poland. Made in
- P.R.C. Store unused for no more than 2 years.
- www.videx.com.pl
- Allegro-opt PE, 106-G Heroiv Mariupolia street, Kropyvnytskyi, 25004, Ukraine.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>