kogan KAGXYLTPRJA Galaxy and Planetarium Star Light Projector User Guide
- July 2, 2024
- Kogan
Table of Contents
USER GUIDE
GALAXY & PLANETARIUM
STAR LIGHT PROJECTOR
WITH 13 LIGHT FILMS
KAGXYLTPRJA
SAFETY & WARNINGS
- Read all instructions carefully and retain this user guide for future reference.
- Inspect the projector to ensure it is in good working condition before use.
- Do not disassemble the projector or attempt to repair it yourself. If the projector is damaged, cease use immediately and contact help.Kogan.com for support.
- Use this projector in a dark indoor environment.
- This projector requires a DC 5V/2A power adapter (not provided).
COMPONENTS
- Galaxy Projector
- USB-C cord
- Light Films Discs (x13)
- User Guide
OVERVIEW
OPERATION
Before Use
- Insert the film with the ‘UP’ engraving facing upward into the film tray (refer to the following section for instructions on replacing the film disc).
- Connect one end of the provided USB-C cord to the USB-C port on the projector and the other end to a DC 5V/2A power adapter (not provided). The projector will automatically project the image.
- By default, the projector operates at a slow rotating speed and will shut off automatically after 4 hours.
- After 40 minutes of operation, the projector enters the slow flashing projection mode.
Power On/Off
Press the Power button to turn the projector on/off. The projector powers on
automatically when plugged in.
Rotation Speed
Press the Speed Adjustment button to change the rotation speed. The speed is
set to slow by default.
| Rotation Speed | Indicator |
|---|---|
| Slow | ‘S-’ indicator illuminates. |
| Fast | ‘S+’ indicator illuminates |
| Stop | No indicator. |
Timer Setting
- The projector powers off after 4 hours, and timer indicator is off by default.
- Press the Timer button to set a 1-hour timer; the ‘1H’ indicator will illuminate.
- Press again to set a 2-hour timer; the ‘2H’ indicator will illuminate.
- Press once more to cancel the timer setting and revert to the 4-hour auto shut-off.
Change the Film Discs
This projector comes with 13 film discs. To change the film disc:
- Pinch the tray handle and pull out the film disc slot
- Place a film disc with the engraved ‘↑UP’ side facing upwards into the film slot.
- Reset the tray back into the projector.
Note:
Replace the film disc while the projector is powered off.
Adjust the Focus
- This projector supports projection focus adjustment within a range of 0.5m-3m (1.64- 9.84ft).
- To adjust the projection focus, refer to the current projection clarity and rotate the focus adjustment knob forward or backward to achieve a clearer projection effect.
SPECIFICATIONS
| Material | ABS. |
|---|---|
| Power Input | DC 5V/2A.. |
| Maximum Power | 10W. |
| Projection Method | Film disc projection. |
| Projection Area | The projection area is 7m²~16m²/75.3ft²~172.2ft² at a |
2m~3m/6.56ft~9.84ft projecting distance, and so on.
Projection Source| LED light bead.
Projection Distance| 0.5m-3m/1.64-9.84ft.
Operating Temperature| -20°C~50°C/-4°F~122°F.
Storage Temperature| -20°C~60°C/-4°F~140°F.
Operating Environment| Use in a dark indoor environment.
Need more information?
We hope that this user guide has given you the assistance needed for a simple
set-up.
For the most up-to-date guide for your projector, as well as any additional
assistance you may require,
head online to help.kogan.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>