KAMN49QDQUCLA 49 Inch Infinity QD-OLED USB-C Curved Gaming Monitor

“`html

Product Information

Specifications

• Model: KAMN49QDQUCLA
• Display: INFINITY QD-OLED USB-C CURVED GAMING MONITOR
• Resolution: 5120 x 1440 (DQHD)
• Refresh Rate: 144Hz
• Response Time: 0.03ms

Product Usage Instructions

Safety & Warnings

Make sure to read and follow all safety instructions provided in
the user manual to prevent damage to the product.

Components

• Monitor
• Stand Arm
• Stand Base
• VESA Screw (x4)
• DP Cable
• Power Cable
• User Guide

Assembly

1. Before assembly, ensure all components are accounted for on a
   flat surface.

2. Attach the stand base to the stand arm using the provided
   screws.

3. Insert the assembled stand into the monitor and secure it by
   pressing down until you hear a click sound.

VESA Mount

• VESA Mounting Pattern: 75 x 75mm, screw size M4

• Ensure the monitor is facing down on a flat surface before
  mounting.

• Install VESA screws into the rear of the monitor for wall
  mounting.

Connectivity

Connect the power cable to the AC input port and then plug it
into an electrical outlet. Use HDMI or HDMI to DVI cables to
connect to your devices.

FAQ

Q: Can I use a different VESA mount with this monitor?

A: The recommended VESA mount size for this monitor is 75 x 75mm
with M4 screws. It is not advised to use a different mount size as
it may not be compatible.

Q: How do I adjust the monitor settings?

A: Use the control buttons on the monitor to navigate through
the menu options. The center button is for confirmation, the left
button for exit, the down button for moving down in the menu, the
right button for adjusting input signal, and the up button for
adjusting brightness.

“`

INFINITY QD-OLED USB-C CURVED GAMING MONITOR
(49″, 5120 X 1440, DQHD, 144HZ 0.03MS)
KAMN49QDQUCLA

Safety & Warnings

3

Components

4

Overview

5

Assembly

6

VESA Mount

8

Connectivity

9

Operation

12

Specifications

17

Notes

18

2

SAFETY & WARNINGS
· Read all instructions before using the appliance and retain for reference. · This monitor is designed with ventilation holes on the back of the casing. Do not cover
or block them. · Do not insert any object or spray any liquid into the vents. · Avoid placing the monitor near heaters, stoves, fireplaces or other sources of heat, as
well as in rooms lacking adequate ventilation. · Do not position the monitor in unsafe locations. If the monitor falls, it may be damaged
and may injure nearby people. · Unplug the monitor if it is not going to be used for an extended period. · Do not place heavy objects on the monitor, its power cord or any connected cable. · Do not open the back panel of the monitor, as it contains a high-voltage current even
when not plugged in. · There is a polariser layer (not a protective film) on the surface of the screen. Do not peel
it off or the product may be damaged and the warranty will be invalid.
The terms HDMI and HDMI High-Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
3

COMPONENTS

Monitor

Stand Arm

Stand Base

VESA Screw (x4)

DP Cable

Power Cable

USB-A ­ USB-B cable

User Guide

4

OVERVIEW
Controls
12 3 4 5
1 Centre button (press in): Confirm key or access the main menu. 2 Left button: Exit or return to the previous menu. 3 Down button: Move down in the menu or select turn off the monitor. 4 Right button: Quickly adjust the input signal. 5 Up button: Move up in the menu or quickly adjust the Brightness. Ports

6 7 8 9 10 11 12 13 14 15

6 Ethernet port 7 USB-A 8 USB-A 9 USB-B 10 HDMI 2

11 HDMI 1 12 USB-C 13 DisplayPort 14 Audio Output 15 AC Input

5

ASSEMBLY
Before disposing of any packaging, place all items on a soft, clean and flat surface to ensure all components are accounted for.
WARNING: The panel of the monitor is the fragile. Keep the foam underneath the monitor screen while assembling the stand.
Installing the stand base 1. Lay the monitor screen facing down on a table with the monitor still resting on the packing foam. Attach the stand base to the stand arm. Insert and tighten the base screws to the underside of the stand base.
2. Open the packing foam with the monitor resting facing downwards. Take the assembled stand and insert it headfirst into the circular opening on the back of the monitor. Once it is inserted press downwards on the neck until you hear a `click’ sound.
6

VESA MOUNT
VESA mounting pattern 75 x 75mm, screw size M4. Note: VESA mount and mounting accessories are not included. 1. Open the box, lay the monitor screen facing down on a table with the monitor still resting on the packing foam. 2. Remove all components and the protective foam from the back of the monitor. 3. If the monitor is already attached to the stand, remove the stand from the monitor. 4. With the circular indention now open. 5. Install VESA screws into the rear of the monitor.
6. Once the VESA screws are installed, the monitor is ready to be wall mounted. The mounting pattern is 75mm x 75mm. Mount (not supplied)
Note: To prevent the monitor on the mount from failing, install it firmly and protect it fully. Do not place or hang any object on the mount and the using height of the mount should be less than 2 meters.
7

Adjustments

20° -5° 20°

Rotation angle ±20° (±2.0°)

20° 120m

Tilting angle -5.0° (±2.0°) – +20° (±2.0°)

Height adjustment 120mm (±5mm)

8

CONNECTIVITY
Power Adapter Connect the power cable plug to the AC input port of the monitor, and then connect the power cable to an electrical outlet.
AC input HDMI Connect the provided HDMI cable (not supplied) from the computer’s HDMI port to the monitor’s HDMI port.
HDMI cable (not included)
9

HDMI to DVI Connect an HDMI to DVI cable (not provided) from the monitor’s HDMI port to the computer’s DVI port. Note: Audio cannot always be transferred through a DVI port.
HDMI cable (not included)
DisplayPort Connect ta DisplayPort cable from the computer’s DisplayPort to the monitor’s DisplayPort.
10

USB-C Insert one end of the USB-C cable (not supplied) into the computer’s USB-C output and connect the other end to the monitor’s USB-C (Type-C) port.
USB-C cable (not included)
USB-A ­ USB-B To enable your monitor to receive a signal from a USB device, connect the included USB cable from the USB-A port on the monitor to the USB-B port on the device.
Audio Out Earphones, headphones or other audio devices can be connected to the 3.5mm audio port (Audio Out) on the monitor. The monitor may need to be set as the PC’s default sound output device.

Earphones

(not included)

11

OPERATION
The on-screen display (OSD) menu can be used to adjust settings of the monitor and is shown on the screen after the monitor is powered on and the button is pressed. Note: The images of the OSD menu shown in this user guide may differ slightly to the actual product.
1. Press the button to activate the browser screen.
2. Push the directional buttons or to scroll through the functions. 3. Select the desired function and press to enter the sub-menu. 4. Press or to scroll through sub-menus and press key to select and confirm
the desired function. 5. Press or to select one option and press to confirm settings and exit from the
current menu. 6. Press to exit from the menu screen.
12

On-Screen Display (OSD) Functions

Functions of the monitor vary with different models and the functions in this user guide are for reference only.

Main Menu Picture Mode

Sub Menu Standard Mode RTS/RPG Mode FPS Mode MOBA Mode Movie Mode Reading Mode Night Mode Eye Care Mode Mac View Mode E-Book Mode sRGB Mode Adobe RGB Mode DCI-P3 Mode Brightness Brightness Mode Low Blue Light Sharpness Gamma Aspect Ratio

Picture Settings Colour Temperature

Hue Saturation Eye shield Remind

Option

Off/On (Custom)

Off/On (Custom)

Off/On (Custom)

Off/On (Custom)

Off/On (Custom)

Off/On (Custom)

Off/On (Custom)

Off/On (Custom)

Off/On (Custom)

Off/On (Custom)

Off/On (Custom)

Off/On (Custom)

Off/On (Custom)

0-100

Normal/Highlight

0-100

0-5

1.1/2.0/2.2/2.4/2.6/Screen

Wide Screen/4:3/1:1/Auto

Warm

Natural

Cool

User1

Red/Green/Green

User2 Red/Green/Green

User3 Red/Green/Green

0-100(R/G/B/C/M/Y)

0-100(R/G/B/C/M/Y)

Off/On

0-100 0-100 0-100

13

Game + 14

Reset Picture Settings HDR Picture Enhancement
Game Aid Game illumination

Off/On

Off/Auto/HDR Game/HDR Movie

Adaptive-Sync O-/On

Colour Enhancement

Off/Level 1-10

CR Enhancement

Off/Level 1-5

Shadow Balance

0-100

Night Vision Mode

Off/Level1/Level2/Auto Level1/Auto Level2

Game Rush Mode

Off/On

Super Resolution

Off/Level 1-5

Reset Picture Enhancement

Off/On

Refresh Rate

Off/On/Position

Game Crosshair

Off/On/Crosshair1/Cross hair2/Crosshair3/Crossh air4/Crosshair5/ Crosshair6

Red/Yellow/Green/Cyan Crosshair Colour /Blue/Purple/…Colour
Palette/White/ Auto

Stop Watch

Off/15:00/30:00/45:00/6 0:00/Position

Game Time

Off/15:00/30:00/45:00/6 0:00/Position

Magnifier Mode

Off/On/Window Size/Window Position/Night Vision Mode

Alignment Aid Off/On

Reset Game Aid Off/On

Off/On

Game illumination Audio Settings PIP/PBP
I/O Settings

LED Bar
Reset Game illumination Volume Audio Mute Reset Audio Settings PIP/PBP Mode Sub-Signal Source Audio Source PIP Position PIP Size Window Swap Reset PIP/PBP Input Signal HDMI EDID Mode DP EDID Mode Quick Boot Type-C DSC USB-Switch DDC/CI Quantisation Range USB Power (Sleep) Reset I/O Settings

Colour (Red/Yellow/Green/Cyan/Blue/Purple/Colo urful) Strength (Highlight/Standard/So) Mode (Normal/Breath/Flicker/Plain Water/Star/Colourful Pearls/Colourful Water) Front Colour (Red/Green/Blue//Yellow/Purple/Cyan) Rear Colour (Red/Green/Blue//Yellow/Purple/Cyan)
Off/On
0-100 Off/On Off/On Off/PIP Mode/PBP 2Win 1:1/PBP 2Win 2:1/PBP 2Win 1:2 Type-C/DP1/DP2/HDMI Auto/Type-C/DP1/DP2/HDMI Top Right/Top Left/Bottom Right/Bottom Left Small/Medium/Large Off/On Off/On Auto/Type-C/DP/HDMI1/DHMI2 4K/5K 4K/5K Off/On Off/On Type-A/Type-B Off/On RGB Limit (16~235)/RGB Full (0~255)/Auto Off/On Off/On

15

Language
OSD Time Out OSD H-Position OSD V-Position OSD Transparency
System Settings Hotkey1 Setting
Hotkey2 Setting OSD Lock Panel Maintenance Energy Saving Software Upgrade Restore Factory Settings

/English// /Portugues do Brasilazil/Deutsch/Nederland/Suomi/Franç ais// Indonesia/ Italiano/ /Malaysia/Polskie/Português/P/ Español///Ting Vit/ /Türkçe
0-60
0-100
0-100
0-5
Brightness/Contrast/Volume/Audio Mute/Shadow Balance/Game Crosshair/Magnifier Mode / Refresh Rate/Game Time/Colour Enhancement/Night Vision Mode/Adaptive Night Vision/ Super Resolution/AdaptiveSync/Picture Mode/HDR/Input Source/Game Illumination/PIP/PBP/ USBSwitch

Off/On

Power LED Power Saving Information USB Upgrade

Off/Level1/Level2/Level3 Off/Level1/Level2

Off/On

16

SPECIFICATIONS

Screen size Aspect ratio Viewing angle Contrast ratio Colour Resolution Refresh rate Power input
Product dimensions
Tilting angle
Height range Swivel angle
Environmental conditions

Without stand Without stand
Action Storage

49inch 32:9 178°(H) / 178°(V) 3000:1(TYP) 1.07Billion 5120 x 1440 144Hz 100-240V~50/60HZ,4.0A 1199.11 x 170.23 x 365.35mm 1199.11 x 360.48 x 453.2mm Forward tilting -5° (±2.0°); Backward tilting 20° (±2.0°) 120±5mm ±20° (±2.0°) Temperature: 0°C~ 35°C (32°F ~ 104°F) Humidity: 10%~80% RH (non-condensing) Temperature: -20°~ 60° (-4°F ~ 140°F) Humidity: 5%~95% RH (non-condensing)

17

NOTES
18

19

Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require,
head online to help.kogan.com
20

References

• Kogan Help Centre

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>