VIDEX 78e7d1920008 LED Luminaire Back Recessed Round User Manual

June 21, 2024
VIDEX

VIDEX 78e7d1920008 LED Luminaire Back Recessed Round

TECHNICAL PARAMETERS

  1. Rated input voltage (VJ and frequency [Hz);

  2. Rated on-mode power (W) (Pon);

  3. Rated full luminous ftux;

  4. Rated useful luminous flux measured in a 120′ cone (ctluse);

  5. Energy efficiency class. according to European Commission Regulation 2019/2020;

  6. Energy efficiency class according to the technical regulations of Ukraine; INTERPRETATION OF THE ICONS

  7. Correlated color temperature (K).

  8. The product is not compatible with light dimmers;

  9. Color rendering index;

  10. Longitudinal and transverse light beam angles(°);

  11. Nominal lifetime L70B50 (hours);

  12. Class of protection against dust and moisture. The product is protected from dust and water jets;

  13. On/off cycles;

  14. Class of protection against mechanical impacts;

  15. Time of expansion to 100% light flux (sec.);

  16. No mercury contains;

  17. Minimum distance from the illuminated object;

  18. Caution. risk of electric shock;

  19. The product can be installed and used on normally flammable surfaces;

  20. Protection against electric shock class I. A product in which the means of protection against electric shock. in addition to the main insulation. is an additional protective circuit connected to the grounding of the power supply network;

  21. Product compliable with standards of ecodesign and energy labelling according to Commission Regulation (Eu) 2019/2020;

  22. For outdoor use;

  23. Do not use the product with a damaged light diffuser. A damaged light diffuser must be replaced;

  24. The product is suitable for use in industrial premises;

  25. The built-in light source is non-replaceable;

  26. The product complies with the technical regulations of Ukraine;

  27. The product meets the requirements of EU directives;
    ENVIRONMENTAL PROTECTION

  28. Pursuant to the provisions of the WEEE Act. it is forbidden to put waste equipment marked with the symbol of a crossed bin together with other waste. The user, wishing to get rid of electronic and electrical equipment, is obliged to return it to a waste equipment collection point. There are no hazardous components in the equipment that have a particularly negative impact on the environment and human health.

    • Overall dimensions [mm). product weight [g/kg). rated current [mA). operating temperatures range (‘CJ, production date and batch number are indicated on individual packaging;
    • Light power curve type: L (Semi wide).
    • The product contains no harmful substances.
    • Product materials: aluminum alloy, polycarbonate;
    • The shelf life before the start of use is unlimited;

PRODUCT’S PURPOSE AND APPLICATION
The product is intended for lighting sidewalks, park paths, local roads, industrial facilities. Not intended for use in domestic premises.

CONTENTS OF THE KIT

  • Lamp (Fig. 1.1);
  • Mounting bracket (Fig. 1.2)
  • Tightening screws 4 pcs (Fig. 1.3)
  • User’s manual (Fig. 1.4)
  • Individual packaging (Fig. 1.5)

MOUNTING AND CONNECTION INSTRUCTIONS

It is mandatory to disconnect power supply before installation. Read the instruction before installation. Installation must be performed by a specialist with appropriate qualifications. Please perform installation and connection according to the diagram below. The connection must be made using a screw terminal block. The product has a grounding wire. Failure to connect the grounding wire may result in possible electric shock. Before the first use, it is necessary to check the correctness of the mechanical fastening and connection. The product can only be used in a network that meets the energy requirements and quality standards stipulated by law.

FUNCTIONAL CHARACTERISTICS
The product should be used only outdoors or in industrial premises.

MAINTENANCE AND SAFETY INSTRUCTIONS

WARNING! Do not look directly at the LED beam. The product can heat up to high temperatures. Do not touch as there is a risk of burns.

Any maintenance works should be carried out with the electricity turned off. and the product should cool down and dry out. Do not cover the lamp. ensure free access of air. Clean only with soft and dry cloths. Do not use chemical detergents. The product may only be supplied with rated voltage or voltage within the given range. It is forbidden to use the product with a damaged light diffuser, damaged wiring or connection points. Do not attempt to repair or disassemble the housing of the light. as this may impair its performance and void the warranty. The product cannot be used in adverse conditions. e.g. vibration. explosive atmosphere. fumes or chemical fumes. etc. The LED light source inside the lamp is non-replaceable. If the light source is broken, please contact manufacturer. A used or damaged product should be disposed of in accordance with current regulations.

Failure to follow these instructions may result into e.g. fire. burns. electrical shock. physical injury and other material and non-material damage. The producer shall not be responsible for any damage resulting from the failure to follow above instructions.

STORAGE AND TRANSPORTATION
Before delivery to the direct point of sale. the product must be stored in the manufacturer’s packaging at a temperature from -20’C to +40’C. in a dry room and without exposure to direct sunlight.
Transportation can be carried out by land. sea. air transport in the manufacturer’s transport packaging.

WARRANTY

The warranty period for the product is indicated on the individual packaging and begins from the date of sale. During the warranty period. a faulty product can be exchanged or returned with prove of purchase and all components and accessories preserved. The following does not apply with the scope of limited warranty:

  • Misuse the product and cause the products components damage;
  • Unauthorized disassemble or the presence of deep mechanical damage to the product;
  • Damage due to force majeure.

The manufacturer reserves the right to make changes to these user manual or technical changes to the product without prior notice.

WARRANTY CARD

  • Item
  • Date and place of sale
  • Date of exchange / return
  • Seller’s stamp and signature
  • INDEX

I mporter: Allegro Opt Sp. zo.o .. Handlowa 23. 05-120 Legionowo. Poland. Made in P.R.C.
www.videx.com.pl
Allegro-opt PE, 106-G Heroiv Mariupolia street, Kropyvnytskyi, 25004, Ukraine.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals