Superlightingled V4-K 4 Knob RGBW LED RF Controller User Manual

4 Knob RGBW LED RF Controller
Model No.: V4-K

4 Channel RGBW/Wireless remote control/Four PWM frequency/Linear or logarithmic dimming/Numeric display

Features

• RGBW constant voltage LED RF controller, can also be used as a RGBW RF remote.
• 4 knob dimming, digital numeric display and easy key operation.
• Match with RF 2.4G single zone or multiple zone RGBW remote control optional.
• 256 levels 0-100% dimming smoothly without any flash.
• Built in 10 dynamic mode, include jump or gradual change style.
• PWM frequency 1000/2000/4000/8000Hz selectable.
• Logarithmic or linear dimming curve selectable.

Technical Parameters

Input and Output

Input voltage| 12-24VDC
Input current| 16.5A
Output voltage| 4 x (12-24)VDC
Output current| 4CH,4A/CH
Output power| 4 x (48-96)W
Output type| Constant voltage
Environment

Operation temperature| Ta: -30 OC ~ +55 OC
Case temperature (Max.)| T c: +85OC
IP rating| IP20
Warranty and Protection

Warranty| 5 years
Protection| Reverse polarity
Dimming data

Input signal| Knob + Key + RF 2.4GHz
Control distance| 30m(Barrier-free space)
Dimming gray scale| 256 levels
Dimming range| 0 -100%
Dimming curve| Logarithmic or linear
PWM Frequency| 1000/2000/4000/8000Hz
Safety and EMC|
---|---
EMC standard (EMC)| EN301 489,EN 62479
Safety standard(LVD)| EN60950
Radio Equipment(RED)| EN300 328
Certification| CE,EMC,LVD,RED

Mechanical Structures and Installations

Wiring Diagram

• Work as RGBW LED controller

• Work as RGBW RF remote

Operation

4 knob dimming

3 key setting

Short press: Turn on or turn off the light. When light is off, display “OFF”. Long press 5s: Enter RF remote matching state, display “RLS”, within 5s, press on/off key or zone key of the RGBW RF remote, display “RLO”, match is successful , Long press 10s: Until display “RLE”, delete all matched RF remote. Long press 15s: Restore factory default parameter, display”RES”.
Short press: Switch between 10 dynamic change mode (P01~P10). Long press 5s: Prepare for setup output PWM frequence, then short press mode key to switch between 1000Hz(“F10”), 2000Hz(“F20”), 4000Hz(“F40”) or 8000Hz(“F80”). Higher PWM frequency, will cause lower output current, higher power noise, but more suitable for camera(No flickers for video). Long press Mode key for 2s or timeout 10s, quit output PWM frequence setting.
Short press: Set mode speed, switch between 1-10 level speed (S-1, S-9, S-F).
Long press 5s: Prepare for setup output brightness curve, then short press speed key to switch between linear curve(“C-L”) or logarithmic curve(“C-E”). Long press Speed key for 2s or timeout 10s, quit output brightness curve setting.

RGBW dynamic mode list

4 Knob Controller Work as RGBW RF remote

This 4 knob controller work as RGBW RF remote can match with one or multiple RGBW LED RF controller. End user can choose the suitable match/delete ways. Two options are offered for selection:

Use the controller’s Match key
Match:
Short press match key of receiver, immediately press on/off key on the knob controller. The LED indicator fast flash a few times means match is successful.
Delete:
Press and hold match key of the receiver for 5s to delete all match, The LED indicator fast flash a few times means all matched RF remotes were deleted.
Use Power Restart
Match:
Switch off the power of the receiver, then switch on power again, immediately short press on/off key 3 times on the knob controller. The light blinks 3 times means match is successful.
.Delete:
Switch off the power of the receiver, then switch on power again, immediately short press on/off key 5 times on the knob controller. The light blinks 5 times means all matched remotes were deleted.

Dimming curve setting

User Manual Ver 1.0.1

Documents / Resources

| Superlightingled V4-K 4 Knob RGBW LED RF Controller [pdf] User Manual
V4-K 4 Knob RGBW LED RF Controller, V4-K, 4 Knob RGBW LED RF Controller, RGBW LED RF Controller, LED RF Controller, RF Controller, Controller
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>