superlightingled LC2000B-TY01 LED Wifi music controller User Manual

June 5, 2024
SuperLightingLED

LC2000B-TY01 LED Wifi music controller

superlightingled LC2000B TY01 LED Wifi music
controller

superlightingled LC2000B TY01 LED Wifi music controller - qr
codehttps://smartapp.tuya.com/tuyasmart
https://smartapp.tuya.com/smartlife

MODEL: LC2000B TYO1

superlightingled LC2000B TY01 LED Wifi music controller - icon
1

superlightingled LC2000B TY01 LED Wifi music controller - figure
1

Name  : LED WiFi (LED WiFi Music Controller)
Model  : LC2000B-TY01 (Vin): DC5-30V @ 0.6A : 8-2048: Tuya APP  :  RGB 1%-100

Control Points : 8~2048
Control Mode : Tuya APP
Speed Settings: 32 Level
Sequence Settings: RGB Arbitrary setting
Config Save: Autosave config
Music Input: MIC/Line input
Brightness adjustment: White/Color/Dynamic /Music can be adjusted 1 %- 100% independently without affecting each other Effect :
Color temperature adjustment+Color adjustment+ Dynamic effect+Music spectrum
(MADE IN CHINA)

SK6812/W52801//W$2811/W$2812/TM 1804/TM 1804B/TM 1809 TM1812/TM 1923/TM 1934/TM 1913/TM 1926/TM 1826/TM1829/TM 1914 TM1914A/UCS1903B/UCS1903N/UCS1909B/UCS1912B/UCS2909B UCS2912B/UCS2903B/GS8205/GS8206/SM 16703/SM 16703P SM 16704P /SM 16704P 8/SM 16709P /SM 16712P/INK1002/INK1003 LX1203/LX1603/LPD8806/APA-102/P9813/P9823/P9883, (More models please view APP) •

superlightingled LC2000B TY01 LED Wifi music controller - figure
2

Smart Life APP Add a device
superlightingled LC2000B-TY01 LED Wifi music
controller

White

Colour


Enter the setting interface and set the parameters according to these steps:

  1. Click the icon and observe the LED, If you see 8 (Group) LEDs lights red or green, or blue is OK;
  2. 2Select the signal wire routing type;
  3. Adjust RGB order: Observe the  urrent light color and click the corresponding RR, G, and B buttons until the LED is white);
  4. Adjust LED height ( 5 Model: LC1000A-TY01/LC2000B-TY01) models according to your needs. and width;
  5. Save settings.

**Amazon Alexa, Google Assistant Yandex Alice
**

Running
superlightingled LC2000B TY01 LED Wifi music controller - figure
7
About voice control: at present, it supports Al speakers such as tmall elf, Xiaozhi housekeeper, Baidu Xiaodu, Amazon Alexa, Google assistant, and Yandex Alice (Control  ON/OFF, brightness, color) Al speakers of other brands will be gra­ dually opened.
Note: All speakers are not necessary. You can buy corre­ spending brands and models according to your needs.

**Foreword

**

Thank you for choosing this product, please read the following information carefully before installation and use.

Product description

This product is a powerful controller specially used to control the LED light bar, LED point light source, and LED pixel screen. It includes three models: LC1000A-TY01/ LC2000B-TY01.

Models LC1000A-TY01 LC2000B-TY01
Points 8-1024 8–2048
Input voltage DC5-30V DC5-30V
Size (mm) L64 x W30 x H10 L120 x W65x H24
Signal mode TTL-DAT/CLic TM-DAT/CLIC DMX512
Sync Type Asynchrony Network cable can synchronously
Music input : — Environmental Environmental/Line input
‘Speed 32 Levels
Sensitivity 20 Levels of MIC sensitivity
Control Type Tuya APP Control (Harmeny0S/Android/I0S)
Brightness Gradient adjustment
RGB Settings Arbitrary of RGB-RBG-GRB-GBR-BRG-BGR
Effect White + Colour + Run + Music
Config Save Automatic parameter saving

(LC2000B-TYO1) Wiring diagram

superlightingled LC2000B TY01 LED Wifi music controller - figure
12

Note: only one signal wire can be connected to CLK or DAT; If there are two signal wires, please press CLK and DAT identification to connect; Please connect
the LED lights of DMX512 protocol according to the identification A and B. superlightingled LC2000B TY01 LED Wifi music controller - figure
13

Note 1. The controller has a built-in microphone. If the audio cable is not plugged in, it is the ambient voice control. If the audio cable is plugged in, it is the line voice control automatically. 2. After cascading, the first controller automatically becomes the host, and other controllers automatically become the slave, and the WiFi hotspot of the slave disappears, and at the same time, the same data signal as the host is output to the lamp.

The above wiring diagram is only based on model “LC2000B-TY01” controller, LC1000A-TY0 1 wiring mode is similar to this, please follow the product shell identification,  refer to the above Wiring diagram is enough.LC1000A-TY01 can tum on or off the led by pressing the key or selecting the effect mode, and long press to redistribute the network.

  1. This product is used with the ”Tuya smart” or “Smart Life” account.
    If not registered, please register the account first;

  2. This product needs to be connected to the router. Please ensure that the router can normally access the external network;

  3. This product supports the control of “Tuya smart” and “Smart Life” app software. Both apps can be searched, downloaded and installed in the application market/ app  store by mobile phone or tablet, or can be downloaded by scanning the corresponding QR code on the product manual or product package;

  4. Distribution network operation: the controller is connected to the lamp and powered on. Power off when the LED is on, After continuous operation for 5 times, the controller will enter the distribution network state. At this time, the LED lamp will light white  and breathe gradually;
    Note: LC1000A-TY01 can also enter the distribution network state by long pressing the multi-function key.

  5. Start the “Tuya smart” app and log in to the account to automatically find the controller and add it.

Tuya smart APP Add device


Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

SuperLightingLED User Manuals

Related Manuals