SuperLightingLED RBX Series 2.4G Touch Remote Control Instructions
- October 30, 2023
- SuperLightingLED
Table of Contents
2.4G Touch Remote
Control Instructions
Brief:
RBX series (RB1, RB2, RB3, RB4) and RCX series (RC1, RC2, RC3, RC4) are 2.4G RF wireless touch remote controls, which can work with our SP63XE, SP52XE etc. series controllers.
Features:
- 2.4G wireless remote control technology, with low power consumption, long transmission distance, strong anti-interference ability etc..
- Touch control, high sensitivity, good consistency and reliability.
- Support one-to-many control, a remote control can control multiple controllers.
- Support multi-to-many control, each controller can bind up to 5 remote controls.
- Support unified control and 4-zones control.
Functions:
Remote Models
86-Type Panel Models
-
ON
Short press: Turn on the light. long press: Within 20s after the controller is powered on, long press to bind/unbind the remote control. -
OFF
Short press: Turn off the light. Long press: Within 20s after the controller is powered on, first turn off the lights completely, and then long press the button to clear all bound remote controls. -
ZONE
Short press: select specific zone, E.g: short press 1 first, then press , then only zone 1 will respond to this operation. Long press: zone setting, within 20s after the controller is powered on, long press a key 1…4 to set the controller to specific zone. -
ALL
Short press: select all zones. long press: Within 20s after the controller is powered on, long press ALL to unset the zones. -
MODE+
-
MODE-
-
SPEED
-
MUSIC MODE
-
25%, 50%, 75% Brightness(RB1) 1%-100% Brightness Adjustment (RB2,RB3,RB4) -
RB1 RB2 RB3 RB4 100% Brightness Warm/Nature/ Cold White White Color HUE/ Temperature Ring
Brightness Ring| Temperature Ring| Color HUE Ring| Color HUE/
Temperature Ring -
ON
Short press: Turn on the light. long press: Within 20s after the controller is powered on, long press to bind/unbind the remote control. -
OFF
Short press: Turn off the light. Long press: Within 20s after the controller is powered on, first turn off the lights completely, and then long press the button to clear all bound remote controls. -
ALL
Short press:select all zones. long press:Within 20s after the controller is powered on, long press ALL- to unset the zones. -
1,2,3,4
Short press: select specific zone, E.g: short press 1 first, then press ,then only zone 1 will respond to this operation. Long press: zone setting, within 20s after the controller is powered on, long press a key 1…4 to set the controller to specific zone. -
SPEED
-
MODE
-
MUSIC MODE
-
| 1%-100% Brightness Adjustment (RB2,RB3,RB4)
---|--- -
RB1 RB2 RB3 RB4 Brightness Level Warm/Nature/ Cold White White Color HUE/ Temperature Ring
Brightness Ring| Temperature Ring| Color HUE Ring| Color HUE/
Temperature Ring
Technical Parameters:
Working Voltage:3V(CR2032) | Quiescent Current: 26uA |
---|---|
RF frequency: 2.4GHz | Remote Range:30M |
Remote DIMensions: 135mm48mmlOmm | Panel DIMensions: 86m m86m m12mm |
Cautions:
- Please match the model of remote control correctly according to the model of controller.
- If the LED indicator appears to be unresponsive or flashing chaotically, please replace the battery in time, please do not use inferior batteries.
- Do not touch the touch panel within 2S after installing the new battery.
- Please do not use it in high humidity, high temperature, dusty and high pressure environment.
- Please do not use the remote control in strong electromagnetic interference area, otherwise it will seriously affect the remote control distance.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>