Superlightingled E2-B Hand Swipe Induction CCT Dimmer Owner’s Manual
- June 4, 2024
- SuperLightingLED
Table of Contents
- Superlightingled E2-B Hand Swipe Induction CCT Dimmer Owner’s Manual
- Hand Swipe Induction CCT Dimmer
- Features
- Technical Parameters
- Dimension
- Hand swipe control
- Hand swipe control
- Push-DIM control
- Push switch K2：
- Notice：
- Dimming curve
- Read More About This Manual & Download PDF:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Superlightingled E2-B Hand Swipe Induction CCT Dimmer Owner’s Manual
Hand Swipe Induction CCT Dimmer
Model No.: E2-B
Hand swipe induction / Push dim / Max.3A output / Aluminum profile installation
Features
Hand Swipe Induction CCT Dimmer
-
Hand swipe induction CCT dimmer, connected directly to the color temperature low-voltage LED strip.
-
When hand swipe, switch between brightness and color temperature adjustment.
When hold hand short for on/off and long for adjust brightness / color temperature continuously. -
Connect with external two push switches, one is used for on/off and adjusting brightness, the other is used for adjusting color temperature.
-
Max 3A output current, max output power 72W@24V.
-
Generally installed in the aluminum lamp strip housing.
-
3M paste in the bottom of the PCBA make easy installation and security.
-
Low cost and high stability.
-
Widely used in table lamps, bedroom lamps, wardrobe lights, etc.
Technical Parameters
Input and Output
Input voltage| 12-24VDC
Output voltage| 12-24VDC
Output power| Max. 36W@12V Max. 72W@24V
Safety and EMC
EMC standard (EMC)| ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Safety standard(LVD)| EN 62368-1:2020+A11:2020
Certification| CE,EMC,LVD
Sensor data
Detective distance(cm)| ≤6
Detective angle (OC )| 15-30
Warranty and Protection
Warranty| 5 years
Protection| Reverse Polarity
Dimension
Hand swipe control
- Hand swipe (<1s):Switch between brightness and color temperature adjustment.
- Hold hand (<1s):Turn on/off the light.
- Hold hand (>1s): Adjust brightness or color temperature continuously, with every other long hold hand, the brightness or color temperature level goes to the opposite direction
Hand swipe control
- Hand swipe (<1s): Switch between brightness and color temperature adjustment.
- Hold hand (<1s): Turn on/off the light.
- Hold hand (>1s): Adjust brightness or color temperature continuously, with every other long hold hand, the brightness or color temperature level goes to the opposite direction.
Push-DIM control
- Short press: Turn on / off the light gradually.
- Long press(1-6s): Adjust brightness continuously, with every other long press, the light level goes to the opposite direction. Push switch K1：
Push switch K2：
- Short press:Change 3 levels color temperature (WW, NW and CW) in sequence.
- Long press(1-6s): Adjust color temperature continuously, with every other long press, the color temperature level goes to the opposite direction
Notice：
- NW = 50% WW + 50% CW
- For color temperature adjustment, if the current brightness is lower than 30%, the brightness will auto restore 30% to avoid light flash.