Superlightingled PB-12-12 RF Constant Voltage LED Driver Instruction Manual

June 4, 2024
SuperLightingLED

Superlightingled PB-12-12 RF Constant Voltage LED Driver

Superlightingled PB-12-12 RF Constant Voltage LED
Driver

Features

  •  Dimming interface: RF Wireless, AC Push-Dim
  •  Match with RF 2.4G single color remote control, one RF LED driver accepts up to 10 remote controls
  •  Universal AC input / Full range
  •  1 channel constant voltage output, Max. total output power 12W
  •  Auto-transmitting function: LED driver automatically transmit signal to another LED driver with 30m control distance
  •  Synchronize on multiple number of LED drivers
  •  Light on/off fade time 3s selectable
  •  Over-heat / Over-load / Short circuit protection, recover automatically
  •  Full protective plastic case
  •  Suitable for indoor LED lighting application
  •  5 Year, 50,000hr warranty

Mechanical Structures and InstallationsSuperlightingled PB-12-12 RF
Constant Voltage LED Driver 2

Technical Parameters

Superlightingled PB-12-12 RF Constant Voltage LED
Driver 3

Applications

  •  Suitable for LED related fixture or appliance which use LED light bar and LED tape (like LED Decoration or Advertisement devices).
  •  Office / Commercial / Domestic Lighting, Hotels, Retail and Display.
  •  Use for retrofit upgrades & new luminaire designs.

**Wiring Diagram

Superlightingled PB-12-12 RF Constant Voltage LED
Driver 4**

RF Connection

Match Remote Control (two match ways)

End user can choose the suitable match/delete ways. Two options are offered for selection:

Use Match key

  • Match:
    • Short press match key, immediately press on/off key (single zone remote) or zone key (multiple zone remote) of the remote.
  • Delete:
    • Press and hold match key for 5s to delete all match, The light blinks 5 times means all matched remotes were deleted.

Use Power Restart

  • Match:
    • Switch off the power, then switch on power, repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful.
  • Delete:
    • Switch off the power, then switch on power repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted.

When use multiple RF drivers, two application method:

  •  All the drivers in the same zone.Superlightingled PB-12-12 RF Constant Voltage LED Driver 5
    • Auto-transmitting: One driver can transmit the signals from the remote to another driver within 30m, as long as there is a driver within 30m, the remote control distance can be extended.
    • Auto-synchronization: Multiple drivers within 30m distance can work synchronously when they are controlled by the same remote.
    • Driver placement may offer up to 30m communication distance. Metals and other metal materials will reduce the range.
    • Strong signal sources such as WiFi routers and microwave ovens will affect the range.
    • We recommend for indoor applications that driver placements should be no further apart than15m
  •  Each driver(one or more) in a different zone, like zone 1, 2, 3 or 4.Superlightingled PB-12-12 RF Constant Voltage LED Driver 6

AC Push-Dim connection

Superlightingled PB-12-12 RF Constant Voltage LED
Driver 7

The provided AC Push-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switchs.

  •  Short press:
    • Turn on or off light.
  •  Long press (1-6s):
    • Press and hold to step-less dimming, With every other long press, the light level goes to the opposite direction.
  •  Dimming memory:
    • Light returns to the previous dimming level when switched off and on again, even at power failure.
  •  Synchronization:
    • If more than one LED driver are connected to the same push switch, do a long press for more than 10s, then the system is synchronized and all lights in the group dim up to 100%. This means there is no need for any additional synchrony wire in larger installations. We recommend the number of LED drivers connected to a push switch does not exceed 25 pieces, The maximum length of the wires from push to LED driver should be no more than 20 meters.

Dimming Curve

Superlightingled PB-12-12 RF Constant Voltage LED Driver
8

Light on/off fade time

  • Long press match key 5s, then short press match key 3 times, the light on/off time will be set to 3s, the indicator light blink 3 times.
  • Long press match key 10s, restore factory default parameter, the light on/off time also restore to 0.5s

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

SuperLightingLED User Manuals

Related Manuals