Trudoor DL2 Deadbolt Lock Installation Guide
- August 24, 2024
- TRUDOOR
Table of Contents
Trudoor DL2 Deadbolt Lock
HOW TO INSTALL THIS DEADBOLT LOCK
The deadbolt is set for 1-3/8″ ~ 2 “thick door
MARK DOOR & BORE HOLES
- Fold template on edge of door mark site (2-3/8″) or (2-3/4″) of holes.
- Drill a (2-1/8″) hole through door (from both sides to avoid damaging door).
- Drill a(1″) hole in door edge.
- Cut outa 2-1/4″x1-1/8″x5/32″base.
INSTALL LATCH
Install deadbolt oriented with cam slot down.
INSTALL OUTSIDE TRIM
Keep outside tailpiece horizontal while inserting it into cam slot.
INSTALL INSIDE TRIM
Insert the Thumbturn Trim into cam slot.
INSTALL STRIKE
EMERGENCY KEY
- insert Emergency Key into slot.
- Turn Key 90° to retract latch bolt.
Note:
When finishing install, check operation of deadbolt by extending the deadbolt
using the thaumatin, then retract the deadbolt using the key or thaumatin and
then rem ove the key.
Make sure the tailpiece is inserted through slot correctly , if not adjust
tailpiece rotation and reinstall trim.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>