PHILIPS 234623 TrueForce LED 35W Road Lamp Installation Guide
- June 5, 2024
- Philips
Table of Contents
PHILIPS 234623 TrueForce LED 35W Road Lamp
Installation Guide
Please take the time to read this installation guide. The guide contains important information and notes regarding the installation and operation.
overview
- LAMP SUITABLE FOR 50Hz OR 60Hz OPERATION
- NEED TO BE USED IN DRY CONDITIONS OR IN A LUMINAIRE THAT PROVIDES PROTECTION
IMPORTANT
- The product functions as HID lamp in road lighting application, such as high pressure sodium lamp (50/70W), metal halide lamp (50/70W) and high pressure mercury lamp (SOW).
- The product is designed to fit in standard IEC-compliant E27 lamp holders.
- Always switch off the power supply before commencing work!
- Please read the installation instructions carefully to ensure safety.
- The product is not dimmable.
- The product is not compatible to use with electronic ballast.
- Suitable for use in operating temperature range between -40°C to +45°C.
- This product is not used to mains voltage directly.
- Do not change the structure or any components of the product to ensure safety.
- The product should be installed by professional electrician.
- Perform inspection before installation to ensure the luminaire and lamp holder are in good condition to carry the weight and performance of the product.
- Use the enclosed luminaires only, recommend to use in the luminaire with IPX4 to ensure maximum product life.
- Use in horizontal ± I SD burning position only.
- Please do not apply the product in applications which contains emergency or/and explosive proof luminaires.
- The total system performance may vary depending on the lighting/luminaire system.
- For latest information, please refer to www.philips.com/lighting.
- In case of doubt, please consult Signify representative.
- The minimum dimensions requirement on lamp compartment is (L x 0) 220mmx 170mm. Please check the Tc temperature in application guide for best performance.
- Do not install any lamp which is deformed or damaged from transportation or handling.
- Compatible with EM ballasts SOHz only.
- Keep lamps clear during application (esp. no oil contamination on glass tube), to ensure good lamp performance.
DISCLAIMER
Signify disclaims liability for any direct, indirect or incidental damages in case of installation performed either not according to this guide or not performed by a professional electrician.All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights.