omnicharge Omni Mobile User Manual

: June 7, 2024
: omnicharge

Table of Contents

omnicharge Omni Mobile
Safety And Handling
BEFORE USING
- RECHARGING YOUR OMNICHARGE
PORTS AND BUTTONS
BUTTON FUNCTIONS
- DC PORT
USB-C PORT
TECHNICAL SPECIFICATION
CUSTOMER SUPPORT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

omnicharge Omni Mobile

product

Safety And Handling

Read all instructions and cautions carefully before use to avoid personal injury or damage to the unit and any connected products

Handling
Set up your Omnicharge on a hard, stable work surface which allows for adequate air ventilation around the power bank. Omnicharge can be damaged if dropped, burned, punctured, crushed, exposed to heat or moisture or if it comes in contact with liquid. Do not use a damaged Omnicharge as it may cause injury.
DC Output
Improper use of DC Output may harm your device. Consult with your device manufacturer to check the designated voltage before use.
Battery
Your Omnicharge is not user serviceable, do not attempt to replace or modify the battery yourself, this may damage the battery which can cause overheating, fire or injury. Improperly replaced batteries may present a risk of leakage, explosion and personal injury. Any manipulation to the unit or its components will void all warranties
Recycling
The battery in your device should be serviced or recycled by an authorized service provider, and must be recycled or disposed of separately from household waste. Dispose of batteries according to your local environmental laws and guidelines. If no laws or regulations govern, dispose of your omnicharge in a waste bin for electronics.
Recharging
The Omnicharge needs to be recharged within 7 days of purchase and every 6 months to maintain optimal battery health. Failure to do this can cause the battery to over-deplete and will not be covered by warranty.

BEFORE USING

Calibrate the battery
Make sure to fully charge the battery whith in the first seven days of receiving the product.
Note: The Omnicharge battery needs to be recharged at least every 6 months to avoid over depletion. Failure to do so can cause the battery to malfunction and is not covered by warranty.

RECHARGING YOUR OMNICHARGE

Charging via USB-C
USB-C Input: 40W
Use the included USB charging cable to recharge your Omnicharge. A fast charger can be purchased separately. Most USB-C laptop chargers can also be used to recharge the Omnicharge.
Note: If the Omnicharge does not detect incoming power, try to plug in your USB-C charger while the Omnicharge is turned off. Once charging has started, you can power on the Omnicharge to utilize pass-through charging.

Charging via the DC Barrel Port
DC Input 5V-30V, up to 2A (45W Max)
Note: When charging with a wall charger make sure the output voltage of your charger falls within 5V – 36V range. The Omnicharge only accepts 5.5 x 2.1mm barrel plugs.
Note: The USB-C and barrel port operates on the same circuit and can therefore not be used simultaneously.

PORTS AND BUTTONS

Note: For optimal wireless charging, place phone horizontally towards the back of the Omnicharge.

WHAT’S IN THE BOX?
OMNI Mobile 25,600
USB-C TO USB-C CABLE USB-A TO USB-C CABLE Quickstart Guide

parts

Power Button
Battery Indicator / Voltage indicator
DC Input/Output (5.5 x 2.1mm Barrel Port)
USB-C Input/Output
Quick Charge USB (QC 3.0 Compatible)
Wireless Charging

BUTTON FUNCTIONS

PRIMARY CONTROLS

Long press to power on
Long press to power off
Rapidly press the power button four times to enable/disable auto shut off.

DC PORT

DC port max input: 45W
DC port max Output: 72W
Fully recharge in 3 hours
The DC output feature can directly charge your laptop without needing your laptop charger.
Warning: Before using DC Output find the correct voltage for your laptop from its poweradapter. Using the wrong voltage may damage your device. Function

To enter DC output mode, double press the power button, then single press to select your desired voltage preset.
You can purchase additional DC cables from our website. For more information about availableaccessories, please visit www.omnicharge.co

USB-C PORT

USB-C port max input: 40W
USB-C port max Output: 60W
The high powered USB-C port can directly charge your laptop and mobile devices without needing a wall charger. The USB-C port is plug-and-play, just plug your USB-C device into the USB-C port to start charging.

USB

TECHNICAL SPECIFICATION

GENERAL
Weight: 1.2 lbs (560 g)
Dimension: 4.3″ x 6.1″ x 1″ (110 x 157.4 x 25.4 mm)

USB-C
Bidirectional Input/output charging
Input: USB-PD, 5V – 9V – 12V – 15V – 20V, up to 3A, 40W max Output: USB-PD, 5V – 9V – 12V – 15V – 20V, up to 3A, 60W max

USB-A Output
Port1: QC 3.0，5V/3A，9V/2A，12V/1.5A
Port2: QC 3.0，5V/3A，9V/2A，12V/1.5A

DC Port
Bidirectional Input/output charging
Input: 5~30V, up to 2A, 45W max
Output: 12V, 16V, 19V, 24V up to 3A (72W max)

WIRELESS CHARGING
Output: 10W

CAPACITY
8 cells, 25,600 mAh at 3.6V (92Wh)

OPERATING ENVIRONMENT
Temperature 0°C-40°C
Humidity 30-70%
Altitude ≤2000m

CUSTOMER SUPPORT

All Omnicharge products have gone through quality inspection. If you find your Omnicharge or any Omnicharge accessory is experiencing or demonstrating any abnormal behavior, immediately stop all product use and contact us at [email protected]

https://www.facebook.com/
omnicharge https://www.instagram.com/
omnicharge https://www.youtube.com/c/
omnicharge https://twitter.com/omni_charge