Keychron K17 Pro Wireless Custom Mechanical Keyboard User Guide
- June 13, 2024
- Keychron
Table of Contents
Keychron K17 Pro Wireless Custom Mechanical Keyboard
If you are a Windows user, please find the appropriate keycaps in the box, then follow the instructions below to find and replace the following keycaps.
Quick Start Guide
-
Switch To The Right System
Please make sure the system toggle on the top left corner has been switched to the same system as your computer’s operating system. -
Connect Bluetooth
Press fn + 1 (for4 seconds) and pair with device named Keychron K17 Pro. -
Connect Cable
-
The VIA Key Remapping Software
Please visit usevia.app to use the online VIA software to remap the keys.
If the VIA cannot recognize your keyboard, please reach our support to get the instruction.
“‘The online VIA software can only run on the latest version of Chrome, Edge, and Opera browsers yet. “‘VIA only works when the keyboard is connected by wire to the computer. -
The Layers
- The Backlight
- Adjust The Backlight Brightness
- Adjust The Backlight Speed
-
Watch The Building Tutorial On Our Website
If you are building the keyboard for the first time, we highly recommend you watch the building tutorial video on our website first, then start building the keyboard yourself. -
Factory Reset
Troubleshooting? Don’t know what’s going on with the keyboard?
-
Plug in the power cable and switch the keyboard to Cable mode.
-
Factory reset the keyboard by pressing fn + J + Z (for 4 seconds).
-
Download the right firmware and QMK Toolbox from our website.
-
Switch the keyboard to OFF mode and remove the space bar keycap to find the reset button on the PCB.
-
Hold the reset key first, then switch the keyboard to Cable mode.
Release the reset key, and the keyboard will now enter DFU mode. -
Flash the firmware with the QMK Toolbox.
-
Factory reset the keyboard again by pressing fn + J+ Z (for 4 seconds).
- Step by step guide can be found on our website.