omnicharge OP2FA001 Ultimate Power Bank User Manual

Omni 20+
Manual
120V/230V AC
www.omnicharge.co

POWER YOUR NEXT ADVENTURE
For more information visit our support page at www.omnicharge.co/support

BEFORE USING

Calibrate the battery
To make sure the battery percentage reading is correct, make sure to calibrate the battery within the first seven days of receiving the product.

It’s easy to do. Follow these steps:

1. Fully discharge Omnicharge until the screen turns off. Press the Power Button and you should see an empty battery icon on the screen.

2. Fully charge your Omnicharge to 100% to finish the calibration.
   

Note: The Omnicharge battery needs to be recharged at least every 6 months to avoid over depletion. Failure to do so can cause the battery to malfunction and is not covered by warranty.

PORTS AND BUTTONS

Note: For optimal wireless charging, place the phone horizontally towards the back of the Omnicharge.

1. AC Outlet
2. Power and Menu Button
3. USB Button
4. AC Outlet Button| 5. Quick Charge USB (QC 3.0 Compatible)
6. 5V/3A USB-A Port
7. DC Input/Output (5.5 x 2.1mm Barrel Port)
8. USB-C Input/Output
9. Wireless Charging
---|---

BUTTON FUNCTIONS

PRIMARY CONTROLS
• Long press to power on
• Long press to power off| • On/Off AC Outlet
• On/Off USB Ports
---|---
MENU CONTROLS
• Double press to enter the menu
• Quick press to select| • Move Up
• Move Down

SCREEN

OLED screen with real time metrics

1.  Status Icons
2. Power Input (watts)
3. Battery Power Output (watts)
4. Battery Temperature
5. DC Output Voltage
6. Battery Percentage

Note: When you are pass-through charging, the battery output field will show a lower value and can even show 0W output, since the output field is showing how much power is output from the battery and not how much is output from the port.

SCREEN ICONS

AC AC OUTPUT
AC outlet is activated.| USB OUTPUT
USB ports are turned on.
---|---
HVDC OUTPUT
HVDC (high voltage DC) is activated.| CHARGING INPUT
Your Omnicharge is being charged.
USB-C OUTPUT
60W USB-C output is activated.| OPTIMAL CHARGING
Charging at maximum power.
ADJUSTABLE DC OUTPUT
Adjustable 5V-25V DC output is activated.| SOLAR CHARGING
Charging from solar power.
LOW-TEMPERATURE PROTECTION
The battery’s temperature is too low, the charging circuit is shut off.| Wireless Charging
Wireless charging is active.
LOW POWER PROTECTION (ONLY DURING PASS-THROUGH)
Occurs when outgoing power is higher than incoming power and the battery is empty. Omnicharge will cut off the outgoing power until a sufficient battery level has been reached.
OVERPOWER PROTECTION
The device is drawing too much power. Omnicharge will limit or cut off the output power.
OVERHEATING PROTECTION
The battery temperature is too high. Omnicharge will limit or cut off its input and output power.
OVERVOLTAGE PROTECTION
Barrel input voltage exceeds the 36V limit. The input charging circuit is shut off.

MENU NAVIGATION

1. DC OUT
   Turn on DC output and set the voltage and amperage.

2. WALL SOCKET
   Choose whether the AC outlet will output 120V AC or 150V HVDC

3. USB
   Choose whether your USB-A ports are on or off when you turn on your Omnicharge. The default setting is on.

4. SCREEN OFF TIMER
   Set the screen auto shut-off time here. The default setting is 5 min.
   

5. AUTO SHUT DOWN
   Set the power auto shut-off time here. The default setting is 5 min.

6. TEMPERATURE
   Choose whether your temperature is displayed in Celcius or Fahrenheit

7. BUTTON LIGHT
   Choose whether the button lights are on or off. The default setting is on.

8. ABOUT
   Find the model name, capacity, firmware version, and serial number information here.

AC OUTLET

Max output power: 100W
To change the AC output mode, double press the Power Button to enter the menu and select Wall Socket.

1. Choose 120V AC/150V HVDC mode in the menu
   Note:
   Only choose 150V HVDC if you are using a switch-mode power supply, such as a laptop’s AC power adapter. Check our support page at www.omnicharge.co for more detailed information.

2. When AC/HVDC is active, the following icons should appear on the screen
   

3. Power any device.

DC OUTPUT

5V – 25V with 0.1V Accuracy, up to 5A (100W max)
The DC output feature can directly charge your laptop without needing your laptop charger.
Warning: Before using DC Output make sure you know the correct voltage for your laptop.
Using the wrong voltage can damage your device.
Note: For more information visit our support page at www.omnicharge.co/support

Set voltage and amperage through the menu

Omnicharge keeps 4 voltage presets. You can press and hold the power button while selecting a preset to customize the voltage and amperage.

|

You can purchase additional DC cables from our website. For more information about available accessories, please visit www.omnicharge.co/products

USB-C PORT

USB-C port max output: 60W
The USB-C port is plug-and-play. Plug your USB-C device into the USB-C port to start charging
Note: If your USB-C output does not start charging, try to reconnect the USB-C cable.
Power any USB-C device.

RECHARGING FROM THE USB-C PORT

USB-C port max input: 45W
Fully recharge in 3 hours
Plug in a USB-C wall charger and it will start recharging the Omni 20+.
Note: If the Omnicharge does not detect incoming power, try to plug in your USB-C charger while the Omnicharge is turned off. Once charging has started, you can power on the Omnicharge to utilize pass-through charging.
Note: The USB-C and barrel ports operate on the same circuit and cannot operate simultaneously.

RAPID-CHARGING

USB PORTS

USB Port 1: 5V/3A, USB Port 2: QC 3.0

1. Choose whether the USB output is on or off by default.

RECHARGING FROM THE BARREL PORT

DC Input 4.5V-36V, Up to 3A (2W – 45W)
Charging your Omnicharge
Use the included USB charging cable to recharge your Omnicharge. A fast charger is included in certain models and can also be purchased separately.
Note: Make sure the output voltage of your adapter falls within the 4.5V – 36V range.
The Omni 20+ only accepts 5.5 x 2.1mm barrel plugs.

TECHNICAL SPECIFICATION

GENERAL
Weight: 1.35 lbs (611 g)
Dimension: 5.0″x 4.8″x 1.1″(12.7 x 12.2 x 2.7 cm)| USB-C
Bidirectional Input/output charging
Input: USB-PD, 5V~20V, up to 3A, 45W max
Output: 5V/3A，9V/3A，12V/3A，15V/3A，20V/3A, up to 3A, 60W max
---|---
USB-A Output
Port1: QC 3.0，5V/3A，9V/2A，12V/1.5A
Port2: QC 3.0，5V/3A，9V/2A，12V/1.5A| DC Port
Bidirectional Input/output charging
Input: 5~25V, up to 3A, 45W max
Output: 5~25V, up to 5A, 100W max
AC PORT
120V AC, 60Hz, 100W max US version
230V AC, 50Hz, 100W max EU version| WIRELESS CHARGING
Output: 10W
CAPACITY
6 cells, 70Wh max at 3.7V| OPERATING ENVIRONMENT
Temperature 0°C-40°C
Humidity 30-70%
Altitude ≤2000m

CUSTOMER SUPPORT

All Omnicharge products have gone through quality inspection. If you find your Omnicharge or any Omnicharge accessory is experiencing or demonstrating any abnormal behavior, immediately stop all product use and contact us at support@omnicharge.co.

FOLLOW US

https://www.facebook.com/omnicharge
https://www.instagram.com/omnicharge
https://www.youtube.com/c/omnicharge
https://twitter.com/omni_charge

THANK YOU
www.omnicharge.co
MADE IN CHINA
© 2019 Omnicharge.
is a trademark of Omnicharge Inc.
© 2017 Omnicharge.
Omnicharge is a trademark of Omnicharge Inc.

References

• Laptop Power Banks for Mobile Professionals | Omnicharge
• Collections
• twitter.com/omni_charge
• Omnicharge - Powering Professionals On The Go - Home
• Login • Instagram
• Omnicharge - YouTube

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>