omnicharge Omni 20+ User Manual

: June 7, 2024
: omnicharge

omnicharge Omni 20+

BEFORE USING

Calibrate the battery

To make sure the battery percentage reading is correct, make sure to calibrate the battery within the first seven days of receiving the product.

It’s easy to do. Follow these steps:

Fully discharge Omnicharge until the screen turns off. Press the Power Button and you should see an empty battery icon on the screen.
Fully charge your Omnicharge to 100% to finish the calibration.

Note: The Omnicharge battery needs to be recharged at least every 6 months to avoid over depletion. Failure to do so can cause the battery to malfunction and is not covered by warranty

PORTS AND BUTTONS

Note: For optimal wireless charging, place phone horizontally towards the back of the Omnicharge.

AC Outlet
Power and Menu Button
USB Button
AC Outlet Button
Quick Charge USB (QC 3.0 Compatible)
5V/3A USB-A Port
DC Input/ Output (5.5 x 2.1mm Barrel Port)
USB-C Input/ Output
Wireless Charging

BUTTON FUNCTIONS

PRIMARY CONTROLS

|

Long press to power on
Long press to power off

| |

On/Off AC Outlet
On/Off USB Ports

---|---|---|---

MENU CONTROLS

|

Double press to enter the menu
Quick press to select

| |

Move Up
Move Down

---|---|---|---

SCREEN

OLED screen with real time metrics

Status Icons
Power Input (watts)
Battery Power Output (watts)
Battery Temperature
DC Output Voltage
Battery Percentage

Note: When you are pass-through charging, the battery output field will show a lower value and can even show 0W output, since the output field is showing how much power is output from the battery and not how much is output from the port.

SCREEN ICONS

| AC OUTPUT
AC outlet is activated.| | USB OUTPUT
USB ports are turned on
---|---|---|---
| HVDC OUTPUT HVDC
(high voltage DC) is activated.| | CHARGING INPUT
Your Omnicharge is being charged.
| USB-C OUTPUT
60W USB-C output is activated| | OPTIMAL CHARGING
Charging at maximum power.
| ADJUSTABLE DC OUTPUT
Adjustable 5V-25V DC output is activated.| | SOLAR CHARGING
Charging from solar power.
| LOW TEMPERATURE PROTECTION
Battery’s temperature is too low, the charging circuit is shut off| | Wireless Charging
Wireless charging is active.
| LOW POWER PROTECTION (ONLY DURING PASS-THROUGH)
Occurs when outgoing power is higher than incoming power and battery is empty. Omnicharge will cut off the outgoing power until a sufficient battery level has been reached.
| OVERPOWER PROTECTION
Device is drawing too much power. Omnicharge will limit or cut off the output power
| OVERHEATING PROTECTION
Battery temperature is too high. Omnicharge will limit or cut off its input and output power.
| OVERVOLTAGE PROTECTION
Barrel input voltage exceeds the 36V limit. Input charging circuit is shut off

DC OUT
Turn on DC output and set the voltage and amperage
WALL SOCKET
Choose whether the AC outlet will output 120V AC or 150V HVDC
USB
Choose whether your USB-A ports are on or off when you turn on your Omnicharge. The default setting is on.
SCREEN OFF TIMER
Set the screen auto shut-off time here. The default setting is 5 min.
AUTO SHUT DOWN
Set the power auto shut-off time here. The default setting is 5 min.
TEMPERATURE
Choose whether your temperature is displayed in Celsius or Fahrenheit
BUTTON LIGHT
Choose whether the button lights are on or off. The default setting is on.
TIME REMAINING
Choose whether the time remaining is displayed
LANGUAGE
Choose the screen language
FACTORY RESET
Reset the Omnicharge to the factory settings
ABOUT
Find the model name, capacity, firmware version, and serial number information here.

AC OUTLET

Max output power: 100W

To change the AC output mode, double press the Power Button to enter the menu and select Wall Socket.

Choose 120V AC/150V HVDC mode in the menu

Note:
Only choose 150V HVDC if you are using a switch mode power supply, such as a laptop’s AC power adapter. Check our support page at www.omnicharge.co for more detailed information.
When AC/HVDC is active, the following icons should appear on the screen
AC output
HVDC output
Power any device.

DC OUTPUT

5V – 25V with 0.1V Accuracy, up to 5A (100W max)

The DC output feature can directly charge your laptop without needing your laptop charger.
Warning: Before using DC Output make sure you know the correct voltage for your laptop.
Using the wrong voltage can damage your device.

Note: For more information visit our support page at www.omnicharge.co/support

Set voltage and amperage through the menu

Omnicharge keeps 4 voltage presets. You can press and hold the power button while selecting a preset to customize the voltage and amperage.

Once active, the DC icon will appear.

Power your device through the DC port.

You can purchase additional DC cables from our website. For more information about available accessories, please visitwww.omnicharge.co/products

USB-C PORT

USB-C port max output: 60W

The USB-C port is plug-and-play. Plug your USB-C device into the USB-C port to start charging

Note: If your USB-C output does not start charging, try to reconnect the USB C cable

Power any USB-C device.

RECHARGING FROM THE USB-C PORT

USB-C port max input: 45W
Fully recharge in 3 hours

Plug in a USB-C wall charger and it will start recharging the Omni 20+.

Note: If the Omnicharge does not detect incoming power, try to plug in your USB-C charger while the Omnicharge is turned off. Once charging has started, you can power on the Omnicharge to utilize pass-through charging.

USB-A PORTS

5V⎓3A, 9V⎓2A, 12V⎓1.5A QC3.0 compatible

Choose whether the USB output is on or off by default.

RECHARGING FROM THE BARREL PORT

DC Input 5V – 25V, Up to 3A (2W – 45W)

Charging your Omnicharge
Use any AC wall charger, or other power adapters like your laptop charger to recharge your Omnicharge.

Note: Make sure the output voltage of your adapter falls within 5V – 25V range. The Omni 20+ only accepts 5.5 x 2.1mm barrel plugs.

TECHNICAL SPECIFICATION

GENERAL

Weight	1.35 lbs (611 g)
Dimension	5.0″x 4.8″x 1.1″(12.7 x 12.2 x 2.7 cm)

USB-C

Bidirectional Input/output charging

Input| USB-PD, 5V~20V, up to 3A, 45W max
Output| 5V⎓3A，9V⎓3A，12V⎓3A，15V⎓3A，20V⎓3A, up to 3A, 60W max

USB-A Output

Port1	QC 3.0，5V⎓3A，9V⎓2A，12V⎓1.5A
Port2	QC 3.0，5V⎓3A，9V⎓2A，12V⎓1.5A

DC Port

Bidirectional Input/output charging

Input| 5~25V, up to 3A, 45W max
Output| 5~25V, up to 5A, 100W max

AC PORT

120V AC, 60Hz, 100W max US version

230V AC, 50Hz, 100W max EU version

WIRELESS CHARGING

Output	10W

CAPACITY

6 cells, 70Wh max at 3.7V

OPERATING ENVIRONMENT

Temperature 0°C-40°C

Humidity 30-70%
Altitude ≤2000m

MADE IN CHINA

© 2021 Omnicharge.
is a trademark of Omnicharge Inc

CUSTOMER SUPPORT

All Omnicharge products have gone through quality inspection. If you find your Omnicharge or any Omnicharge accessory is experiencing or demonstrating any abnormal behavior, immediately stop all product use and contact us at support@omnicharge.co.