YAESU FT70 Portable Transceiver User Manual

QUICK OPERATION GUIDE
Castle Automatic Feeder
Model: FT70 & FT70 Plus

DISPLAY OVERVIEW:

BUTTONS OVERVIEW:

NOTE: Will lock automatically after 2 min of inactivity. Hold for 2s to unlock.

Press and hold for 2s to lock/unlock other buttons and screen.
| Return /Cancel button| Return to the previous step.
Return to interface after setting up.
| Number Increase button| Press to increase the value.
| Number Decrease button| Press to decrease the value.
| Manual button| [Must be Unlocked] Press to feed 1 portion.
| Recording button| [Must be Unlocked] Hold for 3s and start recording after a beep is heard {max 10s}.
Recoding saved after a double beep is heard.

SCREEN PANEL INTRODUCTION:

Hold button for 2 seconds to unlock.
Clock indicator| Flash Indicates:
Powered by adapter or battery.
Note: when flashing, press button to set up/ modify the current time.
Timing【24-hours format】| Local time.
Meal| Number of meals.
Battery Level| Lights up when running on battery power.
Turns red to indicate low battery.

INSTRUCTION MANUAL:

STEP 1 — Setting Current Time
Note:
Clock icon flashes when powered as shown in fig.(01).
[If Screen is Locked]
Press and hold for 2s to unlock screen as shown in fig.(02).

TIP: Please note the conversion between 24-hour format and 12-hour format.
Example: 9:00AM = 9:00; 10:00PM = 22:00 More as below:

12-hour Clock 24-hour Clock Comparison Chart

00:00
(Midnight)| 00:00
(Beginning of the day)| 00:00
(Midnight)| 00:00
(Beginning of the day)
---|---|---|---
01:00AM| 1:00| 01:00PM| 13:00
02:00AM| 2:00| 02:00PM| 14:00
03:00AM| 3:00| 03:00PM| 15:00
04:00AM| 4:00| 04:00PM| 16:00
05:00AM| 5:00| 05:00PM| 17:00
06:00AM| 6:00| 06:00PM| 18:00
07:00AM| 7:00| 07:00PM| 19:00
08:00AM| 8:00| 08:00PM| 20:00
09:00AM| 9:00| 09:00PM| 21:00
10:00AM| 10:00| 10:00PM| 22:00
11:00AM| 11:00| 11:00PM| 23:00
12:00AM
(noon)| 12:00| (Midnight)
12:00PM| (End of the day)
24:00

STEP 1.1— HOUR SETTING
[ Must be Unlocked ] Press to set the “hour”of the time.
The two hour digits flash, press / to set the “hour”.

STEP 1.2— MINUTE SETTING
[ Must be Unlocked ]
After setting hour, press to move to set the “minute” of the time. press / to set the “minute”. Press to save.
Note:
Press to modify if needed.

STEP 2 —Setting Meal

STEP 2.1
Press then “1” flashes to set up the first meal.

STEP 2.2
Press to set the “hour” of the time, Press / to set the “hour”. Press to move to set the“ minute” of the time. Press to save.

STEP 2.3
Press / to set up portion then press button to save.
Note:
Press to modify if needed.

STEP 2.4
Press to move to set other meals.
Repeat above step to set up meal time and portion.

STEP 3 —Return to Interface

STEP 3.1
Press to return to interface when setting up as shown in fig.(01).
(Numbers NOT displayed when portion set to 0 as shown in fig.(02)).

STEP 3.2
Press to modify local time, feeding time and portion if needed.

STEP 4 — Locking & Unlocking

Lock:
Press to return to interface when setting up, press for 2s to lock the screen, the lock icon will display.
(Note: Locks automatically after 2 min of inactivity).

Unlock:
Press and hold for 2s to unlock the screen, the lock icon will disappear.

STEP 5 —Recording

[ Must be Unlocked ]
Hold for 3s and start recording after a beep is heard (max 10s).
Double beep indicates recording is saved.

STEP 6 —Manual Feed

[ Must be Unlocked ]
Press to feed 1 portion.

STEP 7 —Reset to Factory Default

[ Must be Unlocked ]
Press and hold and at the same time for 3s until a beep is heard.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>