JIMMY JV85 Handheld Wireless Vacuum Cleaner Instruction Manual
- June 3, 2024
- JIMMY
Table of Contents
JIMMY JV85 Handheld Wireless Vacuum Cleaner
Products Installation
Unpacking
Open the package, take out the foam pad , all accessories and machine from the package, take off the plastic bag and save them for the purpose of future maintenance and repair.
Parts Name
- Switch button
- Power button
- Metal tube release button
- Floor head release button
- Battery pack release button
- LED screen
- Dust cup release latch
- Charger
- Charging holder
- 2-in-1 crevice tool
- 2-in-1 upholstery tool
- Electric mattress head
- Carpet brushroll
Packing List
Part Name| Handheld Vacuum Cleaner| ElectricFloor head| Electric mattress
head| 2-in-1 upholstery tool
---|---|---|---|---
Quantity| 1| 1| 1| 1
Part Name| 2-in-1 crevice tool| Carpet brushroll| Charging holder| Metal tube
Quantity| 1| 1| 1| 1
Part Name| Adaptor| Screw| expansion pipe| Instruction manual
Quantity| 1| 2| 2| 1
Main-body Assembly
Assemble the electric floorhead and metal tube
Hold the floor head with left hand, use right hand to insert the metal tube
vertically into floor head, align with the conductive needle, press the handle
until a “click” sound is heard.
Attention: Keep the handle and floor head in the same direction,
conductive needle shall align with the socket.
When packing, storing or cleaning, if the electric floorhead needs to be
removed, press the brush release button as shown in the picture and pull the
electric floorhead in the direction shown in the picture.
Assemble battery pack and handheld vacuum Cleaner
Assembly of battery pack: hold the hand-held vacuum cleaner in one hand, hold
the battery pack in the other hand, aim at the guiding groove on the body,
slide in the battery pack according to the arrow direction shown in the
picture, and then pull the battery pack after installation to make sure it
does not get loose.
Attention: when the vacuum cleaner is long idled, please remove the
battery, pack the machine and store it in a cool and dry place, avoid direct
sunlight or humid environment.
Assemble metal tube and handheld vacuum
First, assemble floorhead and metal tube according to the method of assembling
electric floor head and metal tube.
Assemble the floorhead, metal tube and handheld vacuum cleaner: as shown by
the arrow, align the conductive needle of the metal tube with the coupler of
the suction nozzle, push up until a“click” sound is heard.
Assembly of accessories
For the convenience of use, this product is specially equipped with some accessories for the hand-held part of the vacuum cleaner. When you use the handheld vacuum cleaner , you can directly connect the accessories according to your needs.
Name model | JV85 |
---|---|
Electric mattress brush | |
2-in-1 Upholstery tool | |
2-in-1 crevice tool | |
Carpet brushroll |
Connect electric mattress head、2-in-1 crevice tool、2-in-1 upholstery tool to handheld vacuum as the picture.
Use of Vacuum
Attention: When use the product for first time, battery power is not full. Need to charge the vacuum before using.
Charging holder assembly
Assembly method one: Put the vacuum cleaner in the holder, and lean the vacuum
cleaner against the wall, place the holder in the position that vacuum cleaner
floorhead does not touch ground. Take off the handheld vacuum cleaner, follow
Fig to place expansion pipe on the wall and follow Fig to place the holder to
the expansion pipe position, and lock in the screw. After assembly completed,
put the vacuum to charger holder to charge or store.
Attention: Do not fix the holder to bathroom or other humid wall.
Charging of vacuum cleaner
When the vacuum cleaner power is insufficient, charge the vacuum cleaner in
time ; When the voltage is too low,to protect the battery, vacuum cleaner will
be automatic power-off,at this time the vacuum cleaner need to be charged.
When charging, plug the charger connector into the A/C power socket,hang the
handheld vacuum cleaner on the holder to start charging.When the handheld
vacuum cleaner LED display shows an increase in power, it indicates that the
vacuum cleaner is charging. When charging is completed, LED display show 100%
power.
After charging, please pull the charger plug off power socket and stop
charging.
Attention: if power cord is damaged, to avoid danger, it must be replaced
by a professional people of the manufacturer, repair ing agent or similar
department.
Use of Handheld Vacuum Cleaner
Take the vacuum cleaner off the holder, press the switch button on the handle to start or stop of the vacuum cleaner. When machine is turned on, it works in normal power mode, press the power button to switch to turbo or max power mode.
Use of Electric Floor Head
Clean hard floor, tile or carpet with the electric floorhead. Carpet brushroll can be replaced to the floorhead to clean long hair carpet.
Note: what is the rolling brush blocking protection?
During the operation of the electric floorhead, if there is a large volume of
foreign matter inhaled or too much fiber wound, or even a child in the play of
the machine mistakenly put his hand into the nozzle, resulting in the
brushroll abnormal stop, the electric floorhead will stop working, in order to
protect personal safety and brush motor.
Use of accessories
2-in-1 crevice tool: suitable for cleaning crevice, door or window
corners and other narrow gap.
2-in-1 upholstery tool: suitable for cleaningcloset, windowsill, sofa and
table surface.
Electric mattress head: Suitable for sofa and mattress. The brushroll
beats and then cleans the dust mite and allergen from deep sofa or bed.
Cleaning and Replacing Parts
NOTES
- HEPA filter is available for sale from local vacuum cleaner distributors.
- It is recommended to clean the dust cup after each use;
When the dust cup is full or the HEPA filter is clogged, it needs to be cleaned and replaced if necessary. Electric floorhead brushroll might be entangled with hair after long time use. It needs to be cleaned in time to keep the vacuum working more efficiently.
Clean dust cup and filtration system
-
Press down the dust cup bottom cover, open dust cup and dump dust into trash can.
-
Hold HEPA lid and rotate anti-clockwise, remove HEPA assembly from handheld vacuum for cleaning.
-
Hold top of cyclone assembly and rotate anti-clockwise, remove cyclone assembly from handheld vacuum for cleaning.
-
If HEPA needs wash, hold the HEPA and rotate clockwise, remove it from HEPA lid for washing.
HEPA needs completely dry before reuse. -
After cleaning, assemble the parts back in the opposite sequence of disassembly.
Clean brush roll
- Move the brush roll release button along the arrow direction remove side cover.
- Remove one end of the brushroll and take it out from nozzle for cleaning.
- After cleaning or replacing brushroll, assemble it back in opposite sequence of disassembly.
Battery pack disassembly
Press the battery release button, remove the battery pack in the arrow direction and place the battery in a plastic bag, then store it in a dry place.
Storage of main body
When the vacuum is long idled, remove the battery, pack the machine and store it in a cool and dry place, do not put in direct sunlight or humid environment.
Safety Notes
- This vacuum cleaner is designed for home use. Do not use it for commercial or other purposes.
- Please read this instruction manual carefully before use, properly save and store it for future use.
- Do not put the vacuum close to fire or other high temperature facility.
- Do not use or store the machine under extreme bad conditions, for example, extreme temperature. It is recommended to use it indoors between the temperature of 5 °C to 40 °C.
- Store the machine in dry place and avoid direct sunlight.
- Fully charge the battery before first use or after long storage.
- Before using the vacuum, make sure brushroll is assembled, otherwise, it may lead to motor fan blockage, causing motor burn out.
- Please do not use the vacuum to pick up detergent, oil, glass slag, needle, cigarette ash, wet dust, water, matches, etc.
- Please do not use the vacuum to pick up tiny particles such as cement,gypsum powder, wall powder, or large objects such as paper balls, otherwise it will cause malfunctions such as blockage and motor burnout.
- Avoid blockage to air inlet or brushroll, it may cause motor failure.
- Do not pour or splash water or other liquids into the machine to avoid short circuit to burn out the machine.
- If the brushroll is not working, please check whether the brushroll is entangled with hair or other long fiber, clean it in time.
- When storing the machine for a long time, ensure that the battery is fully charged before storage and charge the machine at least every three months.
- Unplug the charger to clean or repair the machine. Hold the charger when plugging or unplugging it, and do not pull the charging cord.
- Use a dry cloth to clean the machine. Liquids like gasoline, alcohol, lacquer thinner will cause crack or colour fading and cannot be used.
- If the machine is not working after fully charged, it must be checked and repaired in our designated office, please do not dismantle the machine on your own.
When discard the machine, please press the button to release the battery pack,
take out the battery pack, make sure the machine is disconnected with power
and handled properly. Do not throw into fire, water or soil. If the battery
liquid leakage touches your skin or clothes, wash it with water, if there is
any discomfort, please go to hospital immediately.
Do not use a non-original battery pack, avoiding machine damage and safety
problems. Avoid to use the vacuum cleaner to pick up easily blockable things
such as: plastic bags, candy paper, big scrap of paper, which might affect the
function, even cause failure of working. Please clean the foreign matter on
the floor head in time, then it will work normally. The discarded battery pack
shall be recycled safely, do not throw away casually.
Trouble Shooting
Please check the following issues before sending to designated repair offices.
Trouble | Possible Causes | Solutions |
---|---|---|
Motor does not work | Battery has no power | Charge the vacuum cleaner |
Motor does not work
| Metal tube, floorhead, battery pack and vaccum cleaner is not assembled
correctly| Check the accessories are assembled correctly to the vacuum cleaner
Suction drops| Dust cup full| Clean dust cup
Suction drops| Filter blocked| Clean or replace filter
Suction drops| Floorhead air path blocked| Clean floorhead air path
Short working time after charging| Machine not fully charged| Follow
instruction manual to fully charge the battery
Short working time after charging| Battery old aging| New batteries can be
bought from local distributor
Attention: If any other failures occurred, which need professional tools, in order to avoid danger, the machine must be repaired or replaced by manufacturer, other maintenance offices or professionals from similar offices.
Product Specification
Technical Parameter
Model No. | JV85 |
---|---|
Rated Voltage | 25.2V |
Rated Power | 500W |
Adaptor Input Voltage | 100-240V ~ 50/60Hz 0.8A |
Adaptor Output Voltage | 30V 600mA |
Model No of Electric Floor Head | T-EB110k |
Rated Power of Electric Floor Head | 30W |
Battery pack capacity | 2500mAh |
Charging time | 4h-5h |
Circuit Diagram
Manufacturer Information
Manufacturer | Kingclean Electric Co., Ltd |
---|---|
Address | No.1 Xiangyang Road, Suzhou New District, Jiangsu Province 215009, |
China
Disposal
The machine, accessories and packaging should be sorted for environmental-
friendly recycling.
Do not dispose of the machine into household waste!
Only for EC countries:
According to the European Guideline 2012/19/EU, machines that are no longer
usable, and according to the European Guideline 2006/66/EC, defective or used
battery packs/batteries, must be collected separately and disposed of in an
environmentally correct manner.
Battery packs/batteries:
Integrated batteries may only be removed for disposal by qualified personnel.
Opening the housing shell can damage or destroy the machine.
Do not dispose of battery packs/batteries into household waste, fire or water.
Battery packs/batteries should, if possible, be discharged, collected,
recycled or disposed of in an environmental-friendly manner.
Subject to change without notice.
Warranty Information
This product enjoys one year warranty for the machine and 6 months warranty
for the battery service starting from the date of purchase.
Excluded from the guarantee is normal wear, commercial use, alterations to the
appliance as purchased, cleaning activities, consequences of improper use or
damage by the purchaser or a third person, and damage, that can be attributed
to external circumstances or caused by the batteries.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>