omnicharge OS1AA002 Omni 40 Mobile 3200mAh All-in-One Power Bank User Manual
- June 3, 2024
- omnicharge
Table of Contents
- POWER YOUR NEXT ADVENTURE
- SCREEN
- DC PORT
- AC OUTLET
- HOW TO USE HUB MODE
- USB-A PORTS
- USB-C PORTS
- RECHARGING YOUR OMNICHARGE
- PASS-THROUGH CHARGING
- OMNICHARGE ONE-YEAR LIMITED MANUFACTURER’S WARRANTY
- FREQUENTLY ASKED QUESTIONS
- JOIN OUR COMMUNITY TODAY
- SCREEN ICONS
- SAFETY AND HANDLING
- MENU NAVIGATION
- TECHNICAL SPECS
- Documents / Resources
OS1AA002 Omni 40
Mobile 3200mAh All-in-One Power Bank
User Manual
www.omnicharge.co
POWER YOUR NEXT ADVENTURE
BEFORE USING THE OMNI 40
Calibrate the battery
To ensure a correct battery readout, calibrate the battery when you first
receive the product and periodically in the future.
- Fully discharge the Omnicharge until it cannot be turned on. Press the Power Button and you should see an empty battery icon on the screen.
- Fully charge your Omnicharge to 100% to finish the calibration. Once you see a fully charged battery icon, you can power the Omnicharge back on.
Note : When not in use, the Omnicharge should be stored at the full battery and fully charged at least every 6 months to avoid over depletion. Failure to do so can cause the battery to malfunction and is not covered by warranty.
SCREEN
OLED screen with real-time metrics
1. Status Icons
2. Power Input (watts)
3. Battery Power Output (watts)| 4. Battery Temperature
5. DC Output Voltage
6. Battery Percentage
7. Time Remaining
---|---
| • Long press to power On
• Long press to Power Off| | • Double press to enter the menu
• Quick press to select
---|---|---|---
| • Left Button: On/Off AC Outlet
• Right Button: On/Off HUB| | • Left Button: Move up
• Right Button: Move down
DC PORT
MAX OUTPUT 5A – 100W
5V – 25V
WITH 0.1V ACCURACY
The DC output feature allows you to directly output DC power through the
barrel port. To use this feature you will need to know the voltage and
amperage of your device and have a compatible cable.
Warning : Using the wrong voltage may damage your device.
Enabling DC Output
Omnicharge keeps 4 voltage presets. You can press and hold the power button
while
selecting a preset to customize the voltage and amperage.
Once active, a DC icon will appear on the screen.
AC OUTLET
MAX OUTPUT 100W
To change the AC output mode, double press the Power Button to enter the menu and select Wall Socket.
-
Choose 120V AC/150V HVDC mode in the menu
Note : 150V HVDC is recommended if you are using a switch mode power supply, such as the laptop’s AC power adapter.
Check our support page at www.omnicharge.co for more detailed information. -
When AC/HVDC is active, the following icons should appear on the screen
AC output
HVDC output -
Power any device
HOW TO USE HUB MODE
USB-C PORT IN/OUT
Use the Omni 40 as a USB hub and transfer files between your smartphones,
flash drives, cameras, or laptops.
- Connect the USB-C/HUB port (in the center) to a USB-C port on your laptop.
2. Initiate HUB mode by short pressing the HUB button (Right button), and a HUB icon will appear on the screen.
Note : All the remaining USB-C ports and USB-A ports can be used to transfer files from smartphones, flash drives, cameras or other standard USB-A or USB-C devices.
USB-A PORTS
MAX OUTPUT 27W
USB-A Ports: Quick Charge QC3.0 compatible, 27W Max
- Choose whether the USB output is ON or OFF by default.
USB-C PORTS
MAX OUTPUT 150W
USB-C Main Port (Port 2): 100W Max
USB-C Ports 1&3: 30W Max
The USB-C ports are always on and need no configuration. Simply plug your
USB-C device into any USB-C port to start charging.
Note : The USB-C and DC port share the same power circuit and cannot be
used at the same time.
RECHARGING YOUR OMNICHARGE
-
FROM THE USB-C PORT
USB-C port max input: 90W
Connect a USB-C wall charger and it will automatically start recharging the Omni 40.
If the Omnicharge does not detect incoming power, try to plug in your USB-C charger while the Omnicharge is turned off. -
FROM THE BARREL PORT
To charge from the barrel port make sure you have a compatible charger.
The Omni 40 uses a common 5.5 x 2.5mm connector and accepts voltages in the 5V-25V range.
DC Input 5V – 25V, Up to 5A, Max 90W
Note : The USB-C and DC port share the same power circuit and cannot be used at the same time.
PASS-THROUGH CHARGING
Pass-through charging means that you input power to the Omnicharge while outputting power to your device (passing the power through the Omnicharge). All Omnicharge products support pass-through charging. This means that you can input power through the USB-C or DC port, and output to the AC, or USB-A.
OMNICHARGE ONE-YEAR LIMITED MANUFACTURER’S WARRANTY
Omnicharge warrants that its hardware product shall be free from defects in
materials and workmanship for one (1) year beginning from the date of the
original retail purchase. Omnicharge does not warrant against normal wear and
tear, nor damage caused by accident or abuse.
See www.omnicharge.co/warranty for
specific warranty information about your product and procedures to act on a
warranty claim. Omnicharge’s entire liability and your exclusive remedy for
any breach of warranty shall be at Omnicharge’s option, to repair or replace a
functional equivalent of the product. You may be required to furnish proof of
purchase details when making a claim under this warranty. Warranty protections
are in addition to rights provided under local consumer laws and may vary
among countries, states, and provinces. See the full warranty information to
know your consumer rights and the additional protections provided by this
product warranty.
www.omnicharge.co/warranty
CUSTOMER SUPPORT
All Omnicharge products have gone through quality inspection. If you find your
Omnicharge or any Omnicharge accessory is demonstrating any abnormal behavior,
immediately stop all product use and contact us at:
[email protected], or visit our help
center at https://support.omnicharge.co
FREQUENTLY ASKED QUESTIONS
1. Can I carry my Omni Ultimate+ with me on the plane?****
– This depends on the airline. Many airlines allow up to two batteries between 100Wh – 150Wh with airline approval. In most cases, this just means that you need to fill out a form at check-in. If you are unsure, consult with your airline prior to travel.
2. Can I charge the Omnicharge while powering my devices?****
– Yes, this is known as pass-through charging. The Omni Ultimate+ can input power from either USB-C or DC ports and can output from all other ports at the same time. The DC and USB-C ports share a charging circuit. When pass-through charging, only one USB-C port may be used at a time.
3. My Omnicharge is overheating while recharging.****
– Fast charging generates a lot of heat. When recharging immediately after a heavy discharge, you may experience an OT (over temperature) warning. This is normal behavior, the Omnicharge will resume charging once it has reached a functional temperature.
4. Can I charge my Omnicharge from a solar panel?****
– Yes, the Omni Ultimate+ can be recharged using most portable solar panels. Make sure your solar panel falls within the specs of the DC barrel port (5v- 25v).
5. Why is my Omnicharge outputting power when nothing is connected?****
– This is perfectly normal behavior. The passive power draw can vary from 0.2W-1.5W and is required for the onboard circuits and display.
6. What is USB PD (Power Delivery)?****
– USB PD is a unified charging standard that uses standardized voltages which
allows one universal
– USB-C charger to power other PD-compatible devices like laptops, tablets, or
phones.
JOIN OUR COMMUNITY TODAY
And get one of these accessories:
SCAN QR CODE
To register your Omni 40 and claim your free accessory.
Visit https://www.omnicharge.co/community
SCREEN ICONS
| AC OUTPUT
AC outlet is activated.| | USB OUTPUT
USB ports are turned on.
---|---|---|---
| SOLAR CHARGING
Charging from solar power.| | RECHARGING
Your Omnicharge is being charged.
| ADJUSTABLE DC OUTPUT
Adjustable DC output is activated.| | OPTIMAL CHARGING
Charging at maximum power.
| LOW-TEMPERATURE PROTECTION
The battery’s temperature is too low, the charging circuit is shut off.| |
OVERHEATING PROTECTION
The battery temperature is too high. Omnicharge will limit or cut off its
input and output power.
| OVERPOWER PROTECTION
The device is drawing too much power. Omnicharge will limit or cut off the
output power.| | OVERVOLTAGE PROTECTION
The barrel input voltage exceeds the 25V limit.
The input charging circuit is shut off.
| LOW POWER PROTECTION
If the output is higher than the input and the battery is empty. Omnicharge
will cut the power until a sufficient battery level has been reached.| | HVDC
OUTPUT
HVDC (high voltage DC) is activated.
SAFETY AND HANDLING
Read all instructions and cautions carefully before use to avoid personal injury or damage to the unit and any connected products.
-
Handling
Set up your Omnicharge on a hard, stable work surface which allows for adequate air ventilation around the power bank. The Omnicharge may be damaged if dropped, burned, punctured, crushed, or exposed to heat or moisture. Do not use a damaged Omnicharge as it may cause injury. -
High Temperature
Do not store the device in high-temperature environments, including heat caused by intense sunlight or other forms of heat. Do not the place device in excessively hot environments like cars or near a fire. -
Shock or Fire Hazard
Omnicharge products with AC output generate the same potentially lethal AC power as a normal household wall outlet. Please use it carefully just like using a normal AC wall outlet. DO NO insert foreign objects into outputs or ventilation holes. -
DC Output
Omnicharge products with DC output operate on a specified voltage. Check your device specifications for the operating voltage before use. Improper use of DC output may harm your device. -
Battery
Your Omnicharge is not user serviceable, do not attempt to replace or modify the battery yourself, this may damage the battery which can cause overheating, fire or injury. Improperly replaced batteries may present a risk of leakage, explosion, and personal injury. Any manipulation of the unit or its components will void all warranties. -
Recycling
The battery in your device should be serviced or recycled by an authorized service provider and must be recycled or disposed of separately from household waste. Dispose of batteries according to your local environmental laws and guidelines. If no laws or regulations govern, dispose of your Omnicharge in a waste bin for electronics.
NOTICE
This product is meant for use only in conjunction with appropriate devices.
Please consult your device packaging to determine whether this product is
compatible with your particular device. The manufacturer is not responsible
for any damages to any device incurred through the use of this product.
The manufacturer shall not in any way be liable to you or to any third party
for any damages you or any third party may suffer as a result of the use,
intended or unintended, or misuse of this product in conjunction with any
device or accessory other than the appropriate device for which this product
is designed.
The manufacturer shall not be responsible for any damages you or any third
party may suffer as a result of misuse of this product as outlined above.
You are responsible for product use with an unintended device and any damages
resulting from such use. You agree to indemnify the manufacturer for any
resulting injuries to any third party(ies).
MENU NAVIGATION
-
DC OUT
Turn on the DC output. Set the voltage and amperage by long pressing the power button.
-
WALL SOCKET
Choose whether the AC outlet will output 120V AC or 150V HVDC.
-
USB
Choose whether your USB-A ports are On/Off at the start.
The default setting is on.
-
SCREEN OFF TIMER
Set the screen auto shut-off time. The default setting is 5 min.
-
AUTO SHUT DOWN
Set the power auto shut-off time.
The default setting is 5 min.
-
TEMPERATURE
Choose whether the temperature is displayed in Celcius or Fahrenheit.
-
BUTTON LIGHT
Choose whether the button lights are on or off. The default setting is on.
-
TIME REMAINING
Choose whether the time remaining is displayed.
-
LANGUAGE
Choose the screen language.
-
FACTORY RESET
Reset the Omnicharge to factory settings.
-
ABOUT
Find the model name, capacity, firmware version, and serial number information here.
-
TECHNICAL SPECS
GENERAL
Weight: 1.39 lbs (1050 g)
Dimensions : 9.5” x 2.7” x 2.5”(24.3 x 7.1 x 6.5 cm)
Combined output all ports: 150W
USB-C
Bidirectional Input / Output charging
INPUT : USB-PD 5V 3A, 9V 3A, 12V 3A, 12V 3A, 15V 3A, 20V 5A, 90W Max
OUTPUT : (Main / Port 2)5V 3A, 9V 3A, 12V 3A, 15V 3A, 20V 5A, 100W Max
(Port 1 & 3)5V 3A, 9V 3A, 12V 3A, 30W Max
AC PORT
120V AC, 60Hz, 100W Max US version 230V AC, 50Hz, 100W Max EU version
BATTERY CAPACITY
12 cells, 142Wh ([email protected]) 38,400mAh
OPERATING ENVIRONMENT
Temperature 0°C-40°C
Humidity 30-70%
Altitude ≤ 2000m
USB-A OUTPUT
Port1: (Single) 5V 3A, 9V 2A, 12V 1.5A 18W Max
Port2: (Both) 5V each, total 5V 4.8A
DC PORT
Bidirectional Input/output charging
INPUT : 5~25V, up to 5A, 90W Max
OUTPUT: 5~25V, up to 5A, 100W Max
** MADE IN CHINA
© 2022 Omnicharge.
is a trademark of Omnicharge Inc.**
Documents / Resources
|
omnicharge OS1AA002 Omni 40 Mobile 3200mAh All-in-One Power
Bank
[pdf] User Manual
OS1AA002 Omni 40 Mobile 3200mAh All-in-One Power Bank, OS1AA002, Omni 40
Mobile 3200mAh All-in-One Power Bank, Power Bank, Bank
---|---