EDIFIER EDF231 Multimedia Speaker Instruction Manual

May 15, 2024
Edifier

EDIFIER Logo QS30
Multimedia Speaker
EDIFIER EDF231 Multimedia Speaker Quick Start Guide

What’s in the box?

Source selection

Play control

EDIFIER EDF231 Multimedia Speaker - Figure 3

Cable connection

EDIFIER EDF231 Multimedia Speaker - Figure 4

Bluetooth connection

EDIFIER EDF231 Multimedia Speaker - Figure 5

Light effects

EDIFIER EDF231 Multimedia Speaker - Figure 6

Power on/off

USB connection

EDIFIER EDF231 Multimedia Speaker - Figure 8 https://www.edifier.com/PC.html

EDIFIER EDF231 Multimedia Speaker - Figure 9

Peak output power: 10W
Note:

  • Images are for illustrative purposes only and may differ from the actual product.

Press and hold the ” **” button to power on/off the product.
EDIFIER ConneX mobile app**

  1. With your smart device, scan the QR code on the quick start guide or the packaging.
    •You can also search for “EDIFIER ConneX” in Apple App Store (iOS devices) or Google Play (Android devices).

  2. Download and install the app.

  3. Connect your smart device with the speaker via Bluetooth.

  4. In Bluetooth mode, open EDIFIER ConneX App on your smart device.

  5. Tap the menu for settings and playback control.

Note: BLE connection between your smart device and the speaker keeps alive if the speaker is switched to other input modes than Bluetooth mode.
EDIFIER ConneX HD Computer Application

  1. Access the link below to open the download page.
    https://www.edifier.com/PC.html

  2. Download and install the application on your computer.

Note: The following operating systems support: Windows 11, Windows 10, and MacOS 10.15 or later versions.
To learn more about EDIFIER, please visit www.edifier.com
For EDIFIER warranty queries, please visit the relevant country page on www.edifier.com and review the section titled Warranty Terms.
USA and Canada: service@edifier.ca
South America: Please visit www.edifier.com (English) or www.edifierla.com (Spanish/Portuguese) for local contact information.

Note:

  1. Pin code for connection is “0000” if needed.
  2. To enjoy all Bluetooth functions of this product, make sure that your audio source device supports A2DP and AVRCP profiles.
  3. If no device is connected in 30 minutes, the speaker will switch to Bluetooth hidden mode. The blue indicator will be in a breathing pattern. In this mode, (1) new devices cannot find the speaker, but (2) for a device that exists in the pairing record of this speaker, you can select “EDIFIER QS30” from its Bluetooth device list to reconnect. To exit from Bluetooth hidden mode, press the “ ” button on the speaker.

Note:

  • The following operating systems support USB audio streaming: Windows 11, Windows 10, Windows 8, and Windows 7.
  • In USB mode, volume sync is not supported. To adjust the volume, adjust on the speaker and your device separately.

ISED Regulatory compliance

This device contains licence-exempt transmitters that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
FCC Regulatory Compliance
Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Compliance
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
IB-200-000000-13

FCC statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IC statement: CAN ICES-003(B)/NMB-003(B).

Manual Edition 1.0, January 2024
IB-200-XXXXXX-XX
For more information, please visit our website: **www.edifier.com**EDIFIER EDF231 Multimedia
Speaker - Icon 1

EDIFIER EDF231 Multimedia Speaker - QR Code https://foreign- app.edifier.com/index.php/edifier_provider/public/appDownload.html?appTag=EdifierConneX

NOTICE:
For the need of technical improvement and system upgrade, information contained herein may be subject to change from time to time without prior notice.
Products of EDIFIER will be customized for different applications. Pictures and illustrations shown on this manual may be slightly different from actual product. If any difference is found, the actual product prevails.

EDIFIER Logo Model: EDF286008
FCC ID: Z9G-EDF231
IC: 10004A-EDF231
Edifier International Limited P.O. Box 6264
General Post Office
Hong Kong
Tel: +852 2522 6989
Fax: +852 2522 1989
www.edifier.com
© 2024 Edifier International Limited. All rights reserved.
Printed in China

Documents / Resources

| EDIFIER EDF231 Multimedia Speaker [pdf] Instruction Manual
EDF231 Multimedia Speaker, EDF231, Multimedia Speaker, Speaker
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals