RETEKESS TD157 Restaurant Pager System User Manual

: June 6, 2024
: RETEKESS

Table of Contents

RETEKESS TD157 Restaurant Pager System
Basic Parameters
Instructions
RF ENERGY EXPOSURE AND PRODUCT SAFETY GUIDE
Guarantee
Read User Manual Online (PDF format)
Download This Manual (PDF format)

RETEKESS TD157 Restaurant Pager System

Basic Parameters

Keyboard

Instructions

Note

Before operation, you need to put all pagers in the keyboard charging slot, and charging for 20 minutes.
The antenna must be installed on the keyboard before you using it to call the customer, otherwise it will seriously affect the calling distance.
After modifying any settings (keyboard ID, change calling mode, change call duration time), you need to re-pair the calling keyboard with the pager. Therefore, we recommend that your setting sequence is: set the calling mode-set the call duration-pair the pager with the call keyboard.
Power on: Place all pagers in the charging slot of the calling base, and the pagers will automatically turn on after the power of the calling base is connected.
Power off: Put all pagers in the charging slot of the calling base, enter [999+CALL] on the keyboard.
Note : The pager needs to be paired with the call keyboard, then it can be shut down normally.
Enter the setting mode: short press the [CALL] key and the [DEL] key at the same time, the keyboard screen displays [F1], at this time input the corresponding number “1-4” from the keyboard to select the mode, and press [ CALL] key to enter the setting mode, after the setting is completed, short press the [DEL] key to exit the setting mode, the standby screen displays [—].
Input the number “1”: [F1] Keyboard ID number
Input the number “2”: [F2] Pager ID number setting (pair)
Input the number “3”: [F3] Calling mode setting
Input the number “4”: [F4] Calling duration time setting
Operation process: We recommend you firstly set the [F1] keyboard ID number setting, followed by the [F3] calling mode setting and [F4] calling duration time setting, after completing the above operations, finally set the [F2] pager ID number setting.

[F1] Keyboard ID number setting
Enter the setting mode, choose F1 and enter [CALL],the screen displays the default keyboard ID number of this keyboard. At this time, input the new number “001-999” on the keypad, and short press the [CALL] key to save.
Note : If there is no special requirement, please do not modify the keyboard ID number, otherwise all pagers need to be paired with the keyboard again, then they can be used. Do not set the base number to “000”.

[F2] Pager ID number setting(pair)

Firstly remove all pagers from the base, then enter the setting mode, the screen displays “F1”, press [2+CALL] to enter the pairing mode, enter the 3-digit number (001-998) you want to pair, and put the pager into the charging slot, the 4 lights of the pager will flash, indicating that the setting is successful. Then removing the pager, set the next one in sequence until all the pagers are set and short press the [DEL] key to exit.
Please do not set “999” as a pager number, this number is a [Power off] command.
If you need to modify the pager number, just overwrite the old number with the new number.

[F3] Buzzer switch setting
Enter the setting mode, the default screen displays “F1”, enter [3+CALL] to enter the buzzer switch setting mode, at this time the screen display the current buzzer mode. You can enter [000] to buzzer off or [001] to buzzer on, short press the 【CALL】key to save.

[F4] Calling duration setting
Enter the setting mode, the default screen flashes “F1”,enter [4+CALL]to enter calling duration setting, Enter “001-099” on the keyboard to set seconds of calling duration, short press the 【CALL】key to save.

RF ENERGY EXPOSURE AND PRODUCT SAFETY GUIDE

This radio uses electromagnetic energy in the radio frequency (RF) spectrum to provide communications between two or more users over a distance. RF energy, which when used improperly, can cause biological damage. All Retekess radios are designed, manufactured, and tested to ensure they meet government- established RF exposure levels. In addition, manufacturers also recommend specific operating instructions to users of the radios. These instructions are important because they inform users about RF energy exposure and provide simple procedures on how to control it.

Please refer to the following websites for more information on what RF energy exposure is and how to control your exposure to assure compliance with established RF exposure limits: http://www.who.int/en/

Local Government Regulations

When radios are used as a consequence of employment, the Local Government Regulations requires users to be fully aware of and able to control their exposure to meet occupational requirements. Exposure awareness can be facilitated by the use of a product label directing users to specific user awareness information. Your Retekess radio has a RF Exposure Product Label. Also, your Retekess user manual, or separate safety booklet includes information and operating instructions required to control your RF exposure and to satisfy compliance requirements.

Radio License (if appropriate)
Governments keep the radios in classification, business radios operate on radio frequencies that are regulated by the local radio management departments (FCC, ISED, OFCOM, ANFR, BFTK, Bundesnetzagentur…). To transmit on these frequencies, you are required to have a license issued by them. The detailed classification and the use of your radios, please contact the local government radio management departments. Use of this radio outside the country where it was intended to be distributed is subject to government regulations and may be prohibited.

Unauthorized modification and adjustment

Changes or modifications not expressly approved by the party responsible for compliance may void the user’s authority granted by the local government radio management departments to operate this radio and should not be made. To comply with the corresponding requirements, transmitter adjustments should be made only by or under the supervision of a person certified as technically qualified to perform transmitter maintenance and repairs in the private land mobile and fixed services as certified by an organization representative of the user of those services. Replacement of any transmitter component (crystal, semiconductor, etc.) not authorized by the local government radio management departments equipment authorization for this radio could violate the rules.

FCC Requirements:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.
- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.

CE Requirements:

(Simple EU declaration of conformity) Henan Eshow Electronic Commerce Co.,Ltd declares that the radio equipment type is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU and the ROHS Directive 2011/65/EU and the WEEE Directive 2012/19/EU; the full text of the EU declaration of conformity is available at the following internet address: www.retekess.com.
Disposalhttp://www.retekess.com.
The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that in the European Union, all electrical and electronic products, batteries, and accumulators (rechargeable batteries) must be taken to designated collection locations at the end of their working life. Do not dispose of these products as unsorted municipal waste. Dispose of them according to the laws in your area.

IC Requirements:

License-exempt radio apparatus

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

RF Exposure Information

DO NOT operate the radio without a proper antenna attached, as this may damage the radio and may also cause you to exceed RF exposure limits. A proper antenna is the antenna supplied with this radio by the manufacturer or an antenna specifically authorized by the manufacturer for use with this radio, and the antenna gain shall not exceed the specified gain by the manufacturer declared.
DO NOT transmit for more than 50% of total radio use time, more than 50% of the time can cause RF exposure compliance requirements to be exceeded.
During transmissions, your radio generates RF energy that can possibly cause interference with other devices or systems. To avoid such interference, turn off the radio in areas where signs are posted to do so.
The device complies with RF specifications when the device used at 5mm from your body. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided.
DO NOT operate the transmitter in areas that are sensitive to electromagnetic radiation such as hospitals, aircraft, and blasting sites.

Avoid Choking Hazard
Small Parts. Not for children under 3 years.

Protect your hearing:

Use the lowest volume necessary to do your job.
Turn up the volume only if you are in noisy surroundings.
Turn down the volume before adding headset or earpiece.
Limit the amount of time you use headsets or earpieces at high volume.
When using the radio without a headset or earpiece, do not place the radio’s speaker directly against your ear
Use careful with the earphone maybe possible excessive sound pressure from earphones and headphones can cause hearing loss.
Note : Exposure to loud noises from any source for extended periods of time may temporarily or permanently affect your hearing. The louder the radio’s volume, the less time is required before your hearing could be affected. Hearing damage from loud noise is sometimes undetectable at first and can have a cumulative effect.

Avoid Burns
Antennas

Do not use any portable radio that has a damaged antenna. If a damaged antenna comes into contact with the skin when the radio is in use, a minor burn can result.
Batteries (If appropriate)
When the conductive material such as jewelry, keys or chains touch exposed terminals of the batteries, may complete an electrical circuit (short circuit the battery) and become hot to cause bodily injury such as burns. Exercise care in handling any battery, particularly when placing it inside a pocket, purse or other container with metal objects

Long transmission
When the transceiver is used for long transmissions, the radiator and chassis will become hot.

Safety Operation
Forbid

Do not use charger outdoors or in moist environments, use only in dry locations/ conditions.
Do not disassemble the charger, that may result in risk of electrical shock or fire.
Do not operate the charger if it has been broken or damaged in any way.
Do not place a portable radio in the area over an air bag or in the air bag deployment area. The radio may be propelled with great force and cause serious injury to occupants of the vehicle when the air bag inflates.
To reduce risk
Pull by the plug rather than the cord when disconnecting the charger.
Unplug the charger from the AC outlet before attempting any maintenance or cleaning.
Contact Retekess for assistance regarding repairs and service.
The adapter shall be installed near the equipment and shall be easily accessible
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
Adapter shall be installed near the equipment and shall be easily accessible.
The plug considered as disconnect device of adapter.
The operating temperature of the EUT can’t exceed the specified range.

Approved Accessories

This radio meets the RF exposure guidelines when used with the Retekess accessories supplied or designated for the product. Use of other accessories may not ensure compliance with the RF exposure guidelines and may violate regulations.
For a list of Retekess-approved accessories for your radio model, visit the following
website:http://www.Retekess.com.

Guarantee

Remarks:

This guarantee card should be kept by the user, no replament if lost.
Most new products carry a two-year manufacturer’s warranty from the date of purchase.
The user can get warranty and after-sales service as below:
- Contact the seller where you buy.
- Products Repaired by Our Local Repair Center
For warranty service, you will need to provide a receipt proof of purchase from the actual seller for verification

Exclusions from Warranty Coverage:

To any product damaged by accident.
In the event of misuse or abuse of the product or as a result of unauthorized alterations or repairs.
If the serial number has been altered, defaced, or removed.

Henan Eshow Electronic Commerce Co., Ltd
7/F, Sanjiang Building, No.170 Nanyang Road, Huiji
District, Zhengzhou, Henan, China
Web:retekess.com.ru
Facebook:facebook.com/Retekess.ru
E-mail:support@retekess.com.ru