omnicharge Omni 20c+ Portable Power Bank with USB Hub User Manual
- June 6, 2024
- omnicharge
Table of Contents
- omnicharge Omni 20c+ Portable Power Bank with USB Hub
- BEFORE USING
- PORTS AND BUTTONS
- BUTTON FUNCTIONS
- SCREEN
- SCREEN ICON
- MENU NAVIGATION
- RECHARGE THE OMNI 20USB-C
- HOW TO USE HUB MODE
- USB-C PORTS
- WIRELESS CHARGING
- TECHNICAL SPECIFICATION
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
omnicharge Omni 20c+ Portable Power Bank with USB Hub
BEFORE USING
Calibrate the battery
To make sure the battery percentage reading is correct, make sure to calibrate
the battery whithin the first seven days of receiving the product.
It’s easy to do. Follow these steps:
- Fully discharge Omnicharge until the screen turns off. Press the Power Button and you should see an empty battery icon on the screen.
- Fully charge your Omnicharge to 100% to finish the calibration. Note: The Omnicharge battery needs to be recharged at least every 6 months to avoid over depletion. Failure to do so can cause the battery to malfunction and is not covered by warranty.
PORTS AND BUTTONS
Note: For optimal wireless charging, place phone horizontally towards the back of the Omnicharge.
- 60W USB-C port
- Power and Menu Button
- OLED Screen
- USB Hub Button
- USB-C Output Button
- Quick Charge USB (QC 3.0 Compatible)
- 100W USB-C port
- Wireless Charging
BUTTON FUNCTIONS
PRIMARY CONTROLS
- Long press to power on
- Long press to power off
- On/Off USB-C ports
- On/Off Hub Mode
MENU CONTROLS
- Double press to enter the menu
- Quick press to select
- Move Up
- Move Down
SCREEN
OLED screen with real time metrics
- Status Icons
- USB-C port 1 input(w) output(v)
- Battery Power Output (watts)
- Battery Temperature
- USB-C port 2 input(w) output(v)
- Battery Percentage
Note: When you are pass-through charging, the battery output field will show a lower value and can even show 0W output, since the output field is showing how much power is output from the battery and not how much is output from the port.
SCREEN ICON
MENU NAVIGATION
-
SCREEN OFF TIMER
Set the screen auto shut-off time here. The default setting is 5 min. -
AUTO SHUT DOWN
Set the power auto shut-off time here. The default setting is 5 min. -
TEMPERATURE
Choose whether your temperature is displayed in celcius or fahrenheit -
BUTTON LIGHT
Choose whether the button lights are on or off. The default setting is on. -
ABOUT
Find the model name, capacity, firmware version, and serial number information here.
RECHARGE THE OMNI 20USB-C
USB-C port max input: 45W
Fully recharge in 3 hours
From either USB-C port:
Plug in a USB-C wall charger and it will start recharging the Omni 20 USB-C.
HOW TO USE HUB MODE
Use the Omni 20 USB-C as a USB hub and transfer files between your smartphones, flash drives, cameras or laptops
- Connect the USB-C/HUB port (on the right side) to a USB-C port on your laptop
- Initiate HUB mode by short pressing the HUB button (bottom button), and a HUB icon will appear on the screen. The secondary USB-C port (left side) and the 2 USB-A ports can be used to transfer files from smartphones, flash drives, cameras or other standard USB-A or USB-C devices.
USB-C PORTS
Left USB-C port max output: 60W
Right USB-C port max output 100W
Short press the USB-C output button to turn the USB-C ports on/off.
Note: Make sure the Omni 20 USB-C is powered on before plugging in your
device. Otherwise your device will recharge the Omni 20 USB-C
- USB Port 1: 18W, QC 3.0 Compatible
- USB Port 2: 18W, QC 3.0 Compatible
Combined USB-A/USB-C ports max output 1 00W
Power any device.
WIRELESS CHARGING
Qi wireless charging 10W Output
Simply place your phone on top of the Omnicharge to get fast and reliable wireless charging.
For optimal wireless charging, align your phone horizontally with the back edge of the Omnicharge as shown in the picture. You will see a flashing wireless icon when the phone has been detected.
Wireless Charging Note: The range of the optimal charging area varies depending on the size of the receiver coil of your phone. Some phone models have small receiver coils and can experience sudden interruptions after few seconds of charging. This is because of minor alignment deviations between the transmitter and receiver coil. Please fine-tune your phone’s position until it gets stable wireless charging.
TECHNICAL SPECIFICATION
GENERAL
- Weight: 1.1 lbs (506 g)
- Dimension: 5.0″x 4.8″x 1.1″(12.7 x 12.2 x 2.7 cm)
USB-C
- Bidirectional Input/output charging
- Input: USB-PD, 5V~20V, up to 3A, 45W max
- Output Left USB-C Port: 5V⎓3A,9V⎓3A,12V⎓3A,15V⎓3A,20V⎓3A, up to 3A, 60W max
- Output Right USB-C Port: 5V⎓3A,9V⎓3A,12V⎓3A,15V⎓3A,20V⎓3A, up to 5A, 100W max
USB-A Output
Port1: QC 3.0,5V⎓3A,9V⎓2A,12V⎓1.5A, 18W Max
Port2: QC 3.0,5V⎓3A,9V⎓2A,12V⎓1.5A, 18W Max
WIRELESS CHARGING
Output: 10W
CAPACITY
6 cells, 71Wh (20,100mAh at 3.6V)
OPERATING ENVIRONMENT
Temperature 0°C-40°C
Humidity 30-70%
Altitude ≤2000m
MADE IN CHINA
2021 Omnicharge.
CUSTOMER SUPPORT
All Omnicharge products have gone through quality inspection. If you find your
Omnicharge or any Omnicharge accessory is experiencing or demonstrating any
abnormal behavior, immediately stop all product use and contact us at
support@omnicharge.co.
https://www.facebook.com/omnicharge
https://www.instagram.com/omnicharge
https://www.youtube.com/c/omnicharge
https://twitter.com/omni_charge
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>