SOMiC GS609 Wireless Headphone Instruction Manual

Operation Instructions

Description of button functions

1. Power switch(Long press for 3 seconds to turn on and off)
2. Mode switch (Press this button can switch three kinds of sound effects of game /live streaming/audio-video when it was successfully paired. It was defaulted Game mode when it powers on)
3. RGB light switch(click once to turn off the RGB LED light, and click again to turn on the RGB LED light)
4. Microphone switch(Click once to turn off the MIC, and click again to turn on MICA will have a short “Du” prompt tone when MIC was turned off. On the contrary, it will have a long “Du” prompt tone when it turns on. It defaulted turn-on state when it powers on)
5. Reset hole(when the headset crashes or cannot be turned off, using a thimble to insert into the hole to reset)
6. Roller tuning: Scroll up to increase the volume, scroll down to decrease the volume. 3.5mm Line-in jack: Plug in the audio cable and automatic switch to LINE IN wired mode.
7. 3.5mm Microphone jack(The Microphone is detachable)
8. LED indicator light(when the headset is turned on and not connected, the blue indicator light flashes every 2 seconds; When the headset is connected to the Dongle and enters into Game Mode, the indicator light will be colorful which is red, yellow-orange, green, blue, purple and white color every 2 seconds. The white indicator light will be always on when entering into Video Mode and the blue indicator light means Live streaming mode.
9. Type-C charging socket
10. Charing indicator light ( Red when charging, green when fully charged ) Attention: the headphone cannot power on in low battery status.

GS609 product features

1. Convenient Dual Mode:2.4G wireless and 3.5mm wired connection.
2. Customized high-quality sound unit to provide excellent sound performance
3. Detachable microphone
4. Skin-friendly and environmentally soft leather earmuffs supply you with a comfortable wearing experience.
5. Lightweight design, zero pressure for a long time wearing
6. Game/Video duel mode, satisfy your entertainment requirement
7. Cool RGB LED light design

Technical parameters

[Notess (Warning!)]

1. The maximum input voltage for charging is 5.25V. In order to protect your legitimate rights,pls use the charger purchased from regular channels. The nominal voltage Of the charger is 5V and the output current of the charger is greater than 1A.
2. Do not keep the battery drained for a long time. When not using it for a long time. Please fully charge the headset.
3. When inserting the microphone rod, please be careful in the correct direction and strength to prevent damage to the microphone interface.
4. The product cannot be disassembled/replaced by unofficial personnel. If you meet any problems, please contact SOMIC official After-sales Service at any time.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF  exposure requirements. The device can be used in portable exposure conditions without restriction
FCC ID: 2A3UU-GS609

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>