infans BC10110 3 in 1 Baby Bassinet Bedside Sleeper User Manual

May 15, 2024
infans

infans BC10110 3 in 1 Baby Bassinet Bedside Sleeper

Read all instructions before assembling and using the product.
DO NOT use bedside sleeper if any parts are missing, damaged, or broken. Contact us for replacement parts and instructional literature if needed. DO NOT substitute parts.

Parts List

infans BC10110 3 in 1 Baby Bassinet Bedside Sleeper 1

  1. main body
  2. mattress board
  3. mattress
  4. carry bag
  5. fixing bar
  6. foot stabilizing bar
  7. safety straps
  8. straps for fixing to parent bed
  9. left and right feet

Assembly instructions

  1. Install left and right feet in correct positionsinfans BC10110 3 in 1 Baby Bassinet Bedside Sleeper 2
  2. Insert the foot stabilizing bar and secure it in place with “click” sound.infans BC10110 3 in 1 Baby Bassinet Bedside Sleeper 3
  3. Attach the fixing bar and secure it in place with “click” sound.infans BC10110 3 in 1 Baby Bassinet Bedside Sleeper 4
  4. Insert the mattress board, attach the safety straps around the crib’s main frame and mattress board.infans BC10110 3 in 1 Baby Bassinet Bedside Sleeper 5
  5. Insert the mattress.infans BC10110 3 in 1 Baby Bassinet Bedside Sleeper 6
  6. The installation is complete.infans BC10110 3 in 1 Baby Bassinet Bedside Sleeper 7

Height adjustment function

To raise the height, step on the center of the Foot stabilizing bar to stabilize the bassinet, while holding both sides of sleeping nest rail to pull up to the desired bed height. To lower the bassinet, located the Plastic handles on Left and Right foot tube. Pull both handles up with fingers at the same time to release locks, continue to push the Sleeping nest down to the desired height.infans BC10110 3 in 1 Baby Bassinet Bedside Sleeper
8

Swing function

Hold the release button and lift the wheels up.infans BC10110 3 in 1 Baby
Bassinet Bedside Sleeper 10

Beside bed function

infans BC10110 3 in 1 Baby Bassinet Bedside Sleeper 11

Unzip the left and right side of the front sleeping nest, softly pull out the front tube bar which is covered with fabric from two sides at the same time. And then put the tube bar at the end of sleeping board.

HOW TO USE STRAP AND PLASTIC PLATE

Go through the parental bed FRAME with straps, adjust the length of straps, to make the bed- side sleeper NO GAP between the BEDSIDE SLEEPER and the parental bed. Connect the two buckles on the “co-sleeper” belt to the crib under-side as shown. A “click” will be heard when securely fixed.infans BC10110 3 in 1
Baby Bassinet Bedside Sleeper 12

Pull on the loose ends of the belt to tighten it, ensuring there is no gap between the adult bed and the crib.

Align the crib beside the adult bed. Feed the “co-sleeper belt” underneath the adult mattress.

infans BC10110 3 in 1 Baby Bassinet Bedside Sleeper 14

WARNING:

  1. The Retractable Feet Must Be Used ONLY IN Bedside Sleeper Mode.
  2. Dropping Down The Rail Bar Must Be Used ONLY IN Bedside Sleeper Mode.
  3. The attachment system must always be used in bedside sleeper mode.
  • WARNING – Do not use this product without reading the instructions for use first.
  • WARNING – Stop using the product as soon as the child can sit or kneel or pull itself up;
  • WARNING – Placing additional items in the product may cause suffocation;
  • WARNING – Do not place the product close to another product, which could present a danger of suffocation or strangulation, e.g. strings, blind/curtain cords, etc.
  • WARNING – Do not use more than one mattress in the product.
  • WARNING – The product should be placed on a horizontal floor.
  • WARNING – Young children should not be allowed to play unsupervised in the vicinity of the crib.
  • WARNING – All assembly fittings should always be tightened properly and that care should be taken that no screws are loose, because a child could trap parts of the body or clothing (e.g. Strings, necklaces,ribbons for babies’ dummies, etc.), which would pose a risk of strangulation.
  • WARNING – Use only the pad provided by manufacturer. NEVER add a pillow, comforter, or another mattress for padding.
  • WARNING – Be aware of the risk of burning cigarettes, open fires and other sources of strong heat, such as electric bar fires, gas fires, etc. in the near vicinity of the crib.
  • WARNING – Pay attention to the height of the bedside sleeper.
  • WARNING – Concerning the attachment system shall be provided and the user shall not use other attachment system;
  • WARNING – There shall never be a gap between the lower side of the bedside sleeper and the mattress of the adult bed.
  • WARNING – If there is any gap between the bedside sleeper and the adult bed, DO NOT use product.
  • WARNING – “DANGER! – Always completely raise the drop side when not attached to the adult’s bed.
  • WARNING – Use only the pad provided by manufacturer.NEVER add a pillow,comforter or another mattress for padding.
  • WARNING – To avoid the risk of your child being strangled the attachment system to the adult’s bed shall always be kept away from and out of the crib.

WARNING:

  • Failure to follow these warnings and instructions could result in serious injury or death.
  • Read all instructions before assembling and using the product. FALL HAZARD-To help prevent falls, do not use this product when infant begins to push up on hands and knees or has reached manufacturer’s recommended maximum weight of 19.8 lbs (9kg), whichever comes first.

SUFFOCATION HAZARD

  • Infants have suffocate:
  • In Gaps between extra padding and side of the bassinet/cradle,and
  • On Soft bedding

Use only the pad provided by manufacturer. NEVER add a pillow,comforter or another mattress for padding.

  • WARNING – If a sheet is used with the pad, use only the one provided by the bassinet or cradle manufacturer or one specifically designed to fit the dimension of the bassinet or cradle mattress. To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep, unless otherwise advised by your physician.
  • WARNING – Strings can cause strangulation! Do not place items with a string around a child’s neck, such as hood strings or pacifier cords. Do not suspend strings over a bassinet or cradle or attach strings to toys.
  • WARNING – DO NOT use bedside sleeper if any parts are missing, damaged, or broken. Contact us for replacement parts and instructional literature if needed. DO NOT substitute parts.
  • WARNING – Always read and follow assembly instructions for each product use mode (bedside sleeper &bassinet).
  • WARNING – Assemble product according to manufacturer’s instructions for ANY use mode—bedside sleeper as well as the bassinet modes.
  • WARNING – This bedside sleeper is designed for use only with adult beds that are between 17.52 and 23.22 inches (445mm-590 mm) from floor to top of adult mattress.
  • WARNING – The types of adult beds (BELOW FIG.) with which the bedside sleeper CAN OR CANNOT be used.
  • WARNING – FALL HAZARD-Always check that the bassinet is securely locked on the base/stand when adjusting the height.

The bedside sleepers shall never be used in an inclined position; To prevent a suffocation hazard from entrapment, the bedside sleeper shall be properly secured to the adult bed using the attachment system; Check the tightness of the attachment system before each use by pulling the bedside sleeper in a direction away from adult bed.

Mattress, Box-springs & Frame aligned

ACCEPTABLE BED FRAME IN-LINE

UNACCEPTABLE BED, MATTRESS, BOX-SPRING & FRAME NOT IN-LINE.

WARNING – A bedside sleeper is designed to provide a sleeping area for an infant until he or she begins to push up on hands and knees or approximately 5 months of age. Move your child to another sleeping product when your child reaches this stage.

Entrapment Hazard
To prevent death from entrapment, bedside sleeper must be properly secured to adult bed using the attachment system. There must be no more than 1⁄2 in. (13 mm) gap between bedside sleeper and adult bed. Check tightness before each use by pulling bedside sleeper in a direction away from adult bed. If gap exceeds 1⁄2 in. (13 mm), DO NOT use product. Do not fill the gap with pillows, blankets or other items that are suffocation hazards.

  • Always use ALL required parts for each use mode. Check instruction manual for a list of required parts. Periodically check product for loose, damaged, or missing parts.
  • WARNING – The attachment system must always be used in bedside sleeper mode.
  • WARNING – To avoid death from the infant’s neck being caught on the top rail on the side that is next to the adult bed, the top rail must be no higher than the adult bed mattress.
  • WARNING – Not intended for carrying baby. NEVER use for a baby who is able to sit upright unassisted.
  • WARNING – Never leave the child unattended WARNING NEVER place a child under 6.6 lbs (3kgs) or over 19.8 lbs (9kgs) in the bassinet.
  • WARNING – NEVER move while child is in bassinet.
  • WARNING – DO NOT use toy bar as a handle. Don’t hang anything on toy bar except provided toys.
  • WARNING – Never place the bassinet on countertop, table, on or near steps or on other elevated surfaces.
  • WARNING – ALWAYS use on the flat floor.
  • WARNING – Strings can cause strangulation! Do not place items with a string around a child’s neck, such as hood strings or pacifier cords. Do not suspend strings over a bassinet or cradle or attach strings to toys.
  • Suitable for baby from birth to 5 months.
  • This toy is not intended to be “mouthed” by the baby and should be positioned clearly out of reach of the baby’s face and mouth.
  • The drop side of the crib should never be lowered with the toy in place.
  • Never leave the baby unattended.
  • Always attach all provided fasteners (strings, straps, clamps, etc.) tightly to a crib or playpen according to the instructions. Check frequently.
  • Do not add additional strings or straps to attach to a crib or playpen.
  • Do not mix old and new batteries.
  • Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.

Care and Cleaning

  • Mattress: Remove foam from mattress, Soft Machine wash or hand wash with cold water, gentle cycle. No bleach, Tumble dry, Low heat.
  • Toy bar and toys : Wipe clean with a damp cloth and mild soap. Air dry. Don’t immerse in water.
  • Frame : Wipe the metal frame with soft, clean cloth and mild soap.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

infans User Manuals

Related Manuals