SOMiC M200 Wireless Headset User Manual
- June 5, 2024
- SOMiC
Table of Contents
SOMiC M200 Wireless Headset
overview
Button/Interface Function Introduction:
- volume “+” button: increase headphone volume, next track
- Pause/Play button: power on/off, pause/play, answer/reject/hang up
- Volume”” button: decrease headphone volume, previous track
- Working indicator light: Display the working status of the headset, low battery reminder and display charging status
- Line IN 3.5mm Aux Jack interface 6TPYE-C charging port
Basic operating instructions
-
Startup and pairing Press and hold the 2 key for 3 seconds to start the machine, and the headset will sound the “power on” prompt tone at the same time;After power on, if there is no historical matching record, it will enter the pairing mode. At the same time, the headset will give a “pairing” prompt tone, and a “connected” prompt tone will be given if the connection is successful;After startup, if there is historical matching record, it will enter the back connection mode.
-
Power off (a “power off” tone will be emitted when the headset is turned off) Wireless mode: in the power on state, long press the key for 3 seconds, the headset will turn off, and the headset will send out a “power off” prompt
tone;After entering the pairing mode for 10 minutes, if the pairing is not successful, the headset will automatically shut down;When the type-C charging head is plugged in for charging, the headset will automatically turn off when the headset is powered on;In the power on state, insert the 3.5mm audio cable, and the headset will automatically shut down. At this time, the headset will play the signal of the external device; Pairing lasts for 10 minutes. If pairing fails, it will be shut down directly. -
Loopback mode The headset will enter the loopback mode when: When the phone is turned on, the headset and the mobile phone have historical matching records;
-
Abnormal disconnection of earphone during use (excluding manual disconnection of mobile phone);The loopback lasts for 10 minutes. If the connection succeeds, the loopback mode ends in advance. If the loopback fails, the system will shut down automatically.
-
pairing mode The headset will enter pairing mode when; There is no historical matching record between the headset and the device when it is turned on;When the connection fails; When the mobile phone manually disconnects the current device; In the pairing mode, any device is allowed to actively connect; Pairing lasts for 10 minutes. If the connection is successful, it ends in advance. If pairing fails, it will be shut down directly.
-
Clear pairing Meanwhile, long press the volume”+” key and the volume “-” key for 3seconds to clear the pairing record. The headset will clear all the original pairing, and then enter the normal pairing status, which can be searched and connected by other devices with Bluetooth.
-
Sound effect mode When the headset is connected, press the key four times to switch back and forth between the two sound effect modes, which are divided into game mode (prompt tone “gaming_mode “) and music mode (prompt tone “music_mode”)
-
Music play/ pause when playing music, click to pause/ play music
-
Volume control Increase the volume: click the volume”” button, and when the volume is adjusted to the maximum, there is a prompt tone “Max volume” (the volume adjustment range is synchronized with the external device);
Decrease the volume: click the volume “-” key, and the volume will be adjusted to the minimum with the prompt tone “Min volume” (volume adjustment range, synchronized with the external device). -
Switch Songs Next song: long press the volume “” key for 2 seconds; Previous song: long press the volume”-” key for 2 seconds.
-
Call mode When you call, click to answer the call When calling, double-click to reject the call During a call, click to end the cal When an incoming call occurs, the music playback will be automatically suspended and the earphone ringtone will be played; After rejecting the call / ending the call, the music playback will automatical- ly resume.
-
Last number redial Short press the button twice in succession, the machine will automatical- ly redial the last phone number dialed by the mobile phone.
-
Voice assistant When the device is connected, press the 2 key three times to trigger the mobile phone voice assistant; When the voice assistant is triggered, clickto exit the mobile phone voice assistant.
-
.Low battery status: When the low power status is prompted, the headset can still work for about
-
minutes (depending on the battery condition); When the headset is low, the red light flashes every 5 seconds.
-
Charging Mode: Plug the headset into the charging cable to connect the power supply and enter the charging mode; When charging, the power indicator light is red; When it is full, the power indicator light is blue and on;
-
Wired mode Connect the 3.5mm audio cable to the earphone for plug and play; If you are in the Bluetooth connection mode, the headset will automatically shut down after the 3.5mm audio cable is inserted into the headset
motherboard, and enter the aux external playback mode; In the external playback mode, the headset power cannot be started, and all keys have no function and the microphone does not work; After the lithium battery of the headset is consumed, it can still work in aux mode.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if nat installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not oocur in a particular installation. this equipment does cause harmful interference to radio or belevision reception, which can be determined by turning the equipment off and an, the user is encouraged to try to correct the interference by one or more of the folowing measures:
- Reorient aor relocate the receiving antenna Increase the separasion between the equipment and receiver
- Connect the equipment into an outlet on a circuit diferent from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the follawing two condisions this device may not cause harmful interference, and this device must accept any interference received, induding interference that may cause undesired operation.
Warning
-
Please read the instruction manual carefully before using this product and keep it properly
-
When using for the first time, please charge the product first;
-
If the product is not used for a long time (more than 2 weeks), please charge it
-
The chargers produced must be by regular manufacturers and certified by the national ccc
-
If the mobile phone cannot search the Blustaoth headset, please confirm whether the Bluetooth beadset is in “pairing mode”, Hit has not been paired or connected for a long time, please put the Bluetooth headset into the
charging case and reset the pairing mode. If there is an error in the mobile phone program. -
Headset is available in three connectivity modes (normal Bluetooth mode, Bluetooth low latency mode (with a transmitter) and 3.5mm wired mode) for a variety of scenarios and devices.
-
Headset has two sound modes of game and music, both listening to songs and games.
-
Thanks to 35ms super low latency.you can enjoy the game experience of audio and video synchronization.
-
Headphone microphone is a retractable microphone that can be adjusted according to the usage scenarios.
-
Headset is built-in 1000mA capacity battery with super long life and up to 50 hours without LED.
-
Headsets are ergonomic designed, tough appearance and domineering appearance.
-
Headphones feature large skin-stick leather earcases for comfortable wear.
Note
- This product is compatible with Microsoft Windows 7/8/10, Apple Mac OS system, Android system and 1OS system;
- If it is not available on the operating system or equipment that is not listed, you can contact the after-sales service for a solution;
- During the use of the product, if there is no sound from the microphone or headset, it may be caused by compatibility problems or improper use, and you can contact the after-sales service to find a solution;
- During the use of the product, if any part is damaged, such as a broken cable, please stop using it and contact the after-sales service for a solution to avoid unnecessary losses.
- .During the use of the product, if the headset does not respond for a long time, you can use a sharp object such as a paper clip to press the headset reset button for 1 second, and the headset can be forced to shut down.
- If you want to know more information, please visit Somic’s official website www.itsomic.com.