SOMiC C1tKEAzmkxL 2.4G Wireless Gaming Headset User Manual
- June 14, 2024
- SOMiC
Table of Contents
Dark Assassins Gaming Headset User Manual
2.4G Version
Cautions
- The headset is compatible with Microsoft Windows7/8/10, Apple Mac OS systems, and can be used on PS4.
- If the headset is used on an unlisted operating system or device, it may not work properly. Please contact after-sales service for solutions.
- If there is no sound in the microphone or headset during use, it may be caused by driver compatibility problems or improper use. Please contact after-sales service for solutions.
- If the headset is damaged during use, for example, the cable is broken. please stop using it and contact after-sales service for solutions.
- If the headset does not respond for a long time, please use a paper clip or other sharp objects to press the reset button for 3 seconds. and the headset can be powered off automatically.
- If you want to know more information, please visit Somic’s official website www.itsomic.com.
Headset Controls
- Power on/off
- Mode switch
- Light on/off
- Microphone on/off
- Volume +/-
- Reset button
- AUX interface
Power on/off
Press the power button for 3 seconds, the headset will powered on/off
automatically.
Mode switch
Press the mode switch button once to switch the sound mode . The color of the
headset light represents the corresponding mode.
Colorful: Game mode White: Video mode Blue: Talk mode
Light on/off
Press the light button once to turn the headset light on/off .
Wired mode
Use a 3.5mm audio cable to plug into the headset AUX interface , and the other
end into the host.
Note: In wired mode, all buttons are disabled except for adjusting the volume
+/-.
Microphone on/off
Press the microphone button once to turn the microphone on/off .
Headphones-automatic connection instructions
-
Insert the USB receiver into the USB port of the computer/host, the blue indicator of the USB receive flashes;
-
Press and hold the power button of the headset for 3 seconds, release the headset when the light is on, and the power on is successful;
-
The USB receiver automatically connects to the headset. When the blue light of the USB receiver is always on, the connection is successful;
Note: boot failed, please try again after charging. -
Power on/off
-
USB receiver
-
Blue indicator light
-
Headphone light
Headphones-manual connection
When the headset fails to connect automatically. you need to connect manually.
- The headset is turned on, the USB receiver is plugged into the computer/host USB port, and the blue light flashes.
- Long press the microphone on/off button for 3 seconds, the blue light of the headset flashes quickly and then release it to enter the forced pairing.
- The blue light of the USB receiver is on and the correction is successful.
Connect the microphone
- Microphone interface
- Charging port
- AUX interface
- Pluggable microphone
Warning: It is forbidden to insert the microphone into the AUX interface, which will cause the headset to fail to turn on!
Headset Charging
- When the headset is charged through USB charging cable. the Indicator light will glow solid red. When the headset is fully charged, the indicator light will glow solid green.
- If the power of headset is less than 10%, the indicator light will flash red. Please charge in time.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>