Chasing M2_PRO_MAX 700Wh Battery Compartment Underwater Robot User Manual

June 13, 2024
CHASING

Chasing M2_PRO_MAX 700Wh Battery Compartment Underwater Robot User Manual

Chasing M2_PRO_MAX 700Wh Battery Compartment Underwater Robot User
Manual

Replace 700Wh Battery Compartment Parts

1 Dismounting

  1. First pull up the battery compartment lock knobs on both sides of the machine body and rotate 90° to a shallower card slot ;
  2. Dial the switch on the slider, and buckle the chute to pull the locking assembly up ;
  3. Hold the lower sides of the plate with your hands, and pull down to deform the plate , so that the buckle can be released from the rear bracket;
  4. Pull the circular claw of battery compartment to slowly pull the battery compartment out.

2 Mounting

  1. Pull up the battery compartment lock knobs on both sides of the machine body and rotate 90° to a shallower card slot;
  2. Place the machine body head down and load the battery compartment along the machine body chute. Press down hard, the lock knob is snapped in place until you hear a “Click” sound;
  3. Hold the lower sides of the plate with your hands, pull down to deform the plate “”, and snap the buckle tightly on the rear bracket;
  4. Press the locking assembly chute down, the buckle is snapped in place until you hear a “Click” sound, and the battery mounting is done.

Mounting of Counterweight

Mount the counterweight under the ROV main cabin components with 2 M3X8 combination screws.

Chasing M2_PRO_MAX 700Wh Battery Compartment Underwater Robot User Manual -
Mounting of Counterweight

Mounting of Tether Module Assembly

  1. Unscrew the butterfly thumb screw to remove the upper tether module;Chasing M2_PRO_MAX 700Wh Battery Compartment Underwater Robot User Manual - Unscrew the butterfly thumb screw to remove the upper tether module
  2. Clamp the lower tether module assembly under the ROV into the lower hanging ring components, and mount it on both sides of battery compartment components;
  3. Align the locating pin holes of the upper tether module before clamping the upper hanging ring components;
  4. Screw the butterfly thumb screw.

Chasing M2_PRO_MAX 700Wh Battery Compartment Underwater Robot User Manual -
Screw the butterfly thumb screw

Product Parameters

Chasing M2_PRO_MAX 700Wh Battery Compartment Underwater Robot User Manual -
Product Parameters

List of Articles

Chasing M2_PRO_MAX 700Wh Battery Compartment Underwater Robot User Manual -
List of Articles

Support

For any questions or technical problems, please contact us by the Email of CHASING After-Sales Department or the customer service hotline on the official website. After-sales Service Hotline: 400-667-6959 After-sales Email: [email protected]–Europe [email protected]–Asia & Oceania support03@chasing- innovation.com–North and South Americas & Africa

This Manual is subject to updating without prior notice. The latest version is available on CHASING official website: https://www.chasing.com.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

CHASING User Manuals

Related Manuals