SOMiC GS510 Cat Ear Headset Wireless Gaming Headset Instructions
- June 5, 2024
- SOMiC
Table of Contents
SOMiC GS510 Cat Ear Headset Wireless Gaming Headset
OVERVIEW
Headphones-automatic connection instructions
- Insert the USB receiver into the USB port of the computer/host, the blue indicator of the USB receiver flashes;
- Press and hold the power button of the headset for 3 seconds, release the headset when the light is on, and the power on is successful;
- The USB receiver automatically connects to the headset. When the blue light of the USB receiver is always on, the connection is successful; Note: boot failed, please try again after charging.
Headphones-manual connection
- The headset is turned on, the USB receiver is plugged into the computer/host USB port, and the blue light flashes.
- Long press the mode switch button ma for 3 seconds, the blue light of the headset flashes quickly and then release it to enter the forced pairing
- The blue light of the USB receiver is on and the connection is successful.
HEADSET CONTROLS
Power on/off
Press the power button for 3 seconds, the headset will powered on/off
automatically.
Mode switch
Press the mode switch button moe Once to switch the sound mode. The color of
the headset light represents the corresponding mode. Green: Gaming Mode White:
Music Mode Blue: Live Mode
Wired mode
Use a 3.5mm audio cable to plug into the headset AUX interface, and the other
end into the host. Note: In wired mode, all buttons are disabled except for
adjusting the volume +/-.
Light on/off
Three-click the light touch key to turn on/off the headset light.
Light color switch
Press and hold the light touch key for two seconds to switch the light color.
Headset charging
- When the headset is charged through USB charging cable, the indicator light will glow solid red. When the headset is fully charged, the indicator light will glow solid green.
- If the power of the headset is less than 10%, the indicator light will flash orange. Please charge in time.\
Cautions
- The headset is compatible with Microsoft Windows7/8/10, Apple 1OS and Mac OS systems and can be used on PS4 and Switch.
- 1f the headset is used on an unlisted operating system or device, it may not work properly. Please contact after-sales service for solutions.
- If there is no sound in the microphone or headset during use, it may be caused by driver compatibility problems or improper use. Please contact after-sales service for solutions.
- 1f the headset is damaged during use, for example, the cable is broken, please stop using it and contact after-sales service for solutions.
- 1f the headset does not respond for a long time, please use a paper clip or other sharp objects to press the reset button for 3 seconds, and the headset can be powered off automaticaly.
- lf you want to know more information, please visit Somic’ s offical website www.itsomic.com..
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. onnect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions this device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>