SOMiC G710 Wireless Gaming Headset Instruction Manual

SOMiC G710 Wireless Gaming Headset

Headphone accessory

• Headset :1pcs
• Type C cable :1pcs
• manual :1pcs
• USB dongle :1pcs
• MIC Boom :1pcs
• 3.5mm cable. :1pcs

Button instruction

1. Volume “” button:short press the volume plus level 1, long press to switch the next song; the maximum volume has a “Max volume” prompt sound.
2. multi-function button “MFB”:
3. Turn on: long press about 2 seconds on, voice prompt “Power on”
4. Turn off: when turn on status, shut down for about 3 seconds, voice prompt “Power off”.
5. Pairing: under the shutdown state, press for about 6 seconds to enter the pairing state, with the voice prompt “Pairing”.
6. Play/ pause: When the music is played, press once to play or pause the music.
7. Answer / hang up calls: when there is a call, press once to answer the call, 1 second to refuse to call; when call, press once to hang up the current call.
8. Volume “” button: short press the volume reduction level 1, long press to switch to a song; volume reduction to the hour will have “Min volume” prompt.
9. Microphone mute button:
10. press once to close the microphone, voice prompt “MIC OFF”; press to open the microphone again, voice prompt “MIC ON”.
11. Press long for 2 seconds to switch between game mode and music mode, with a voice prompt of “Gaming mode” or “Music mode”.
12. MIC 3.5mm interface: Need to insert MIC boom can only use MIC function.
13. Line IN 3.5mm audio input interface:When the 3.5mm plug line is inserted, the headset is automatically turned off, and the headset plays the signal of the external device.
14. Type C charging interface: The connected charger specification is automati cally shutdown when Dcsv, is plugged into charging.
15. Headset working indicator light:
16. Power on the blue light will slow flash.
17. During Paring status,red&blue light will alternative flash.
18. Blue light will fast flash when phone incoming call while it will keep lighting when answer the phone.
19. Red light will double flash every 3s in low battery.
20. Charging status indicator: When in charging the indicator light will show red color all the time while it turns into green color after full charge.
21. Left/Right earlap logo LED light:When turn on the headphone,the logo LED light will automatic lighting.

Basic Operation Instruction

1. Turn on &Paring

2. Manually enter matching: In the shutdown state, long press the “multi-function” button for 6 seconds, the headset will directly enter the pairing state after it is turned on.

3. Hold down the “multi-function” button for about 2 seconds in shutdown mode, the Bluetooth headset enters the power-on state (voice prompt “Power on”). When the headset is powered on, Paired will be connected firstly; those never paired enter pairing state (voice prompt Pairing). In the pairing state, devices with Bluetooth function, such as mobile phones, can search for and connect to the headset, and exit the pairing state after the connection is successful.

4. After the earphone enters the pairing state, the red and blue indicator light flashes alternately in the work indicator window. Turn on the Bluetooth function of the mobile phone, set it to discoverable state, and add or search for a new device. Find “G710” in the device list, and select pair. Then the headset connects to the mobile phone successfully, and the voice prompt “Connected” is displayed, that is, the pairing process is complete.

5. Bluetooth transmitter pairing: Bluetooth transmitter is inserted into the computer USB port, when the equipment identification is completed, the blue lights flash slowly, with a thimble by pairing inside the shell of the round hole pressing button for 2 seconds, pairing bluetooth transmitter into the state, the blue indicator light flash, when the bluetooth transmitters and bluetooth headset paired and Connected successfully finished, voice prompt “Connected”, The blue light on theBluetooth transmitter will light up.
   Remark:The Bluetooth headset and the Bluetooth transmitter have been paired at the factory settings. Plug the Bluetooth adapter into the USB port of the computer, and the headset will automatically connect after it is turned on.If it can’ t match,pls follow previous step to re-match again for headphone and uSB dongle.

6. Power off
   When the Bluetooth headset is on, long press the “” button for about 3
   seconds, and at the same time, there will be a prompt tone of “Power off”,
   and the Bluetooth headset will turn off.

7. Volume +/ Next track
   When the device is connected to play music, press the volume “+” button once to increase the sound level by one level. When the volume reaches the maximum, there will be a prompt sound “Max volume”. Hold the volume “+” key long to switch to the next track for the music.

8. Volume -/ Last song
   When the device is connected to play music, press the volume “-” button once to reduce the sound level by 1. When the volume reaches the minimum, there will be a prompt sound “Min Volume”. Hold down the volume “” button long to switch to the previous track.

9. Mute MIC
   During a call, press the “” button once to turn OFF the microphone, and the voice prompt “MIC OFF” will be displayed. Press the “” button again to open the microphone, and the voice prompt “MIC ON” will be displayed.

10. Mute MIC
    Hold down the “” button for 2 seconds to switch modes. A voice prompt will prompt Gaming mode or Music Mode.

11. Calls
    When the connected mobile phone has an incoming call, the voice prompts “In coming call”, and the blue light of the headset flashes. Press “2 button once to answer the cal. When answering the call, the blue light of the headset will be always lighting, press “2” button again to hang up the call, press and hold “2” for 1 second to reject the call.

12. Last number redial
    Short press the “2” multifunction button twice in succession, the machine will automatically redial the last phone number dialed by the mobile phone.

13. Low power warning
    This machine has a low-power voice prompt function. When the battery enters a low-power state, there will be a voice prompt “low power” every 4 minutes and the red indicator light of the headset flashes twice every 3 seconds.

14. Charging instructions

15. The headset has a lithium battery, and it is recommended for you to

16. charge the battery before first using the headset.

17. When the battery power of the headset is too low during use, there will be a “Low Power” prompt sound, please charge it in time.

18. Insert the charging plug into the TypeC port and the headset will automatically shut down. At this time, the charging red indicator light will be on. When it is fully charged, the red indicator light will turn off and the green indicator light will stay on.

19. Bluetooth transmitter instructions

20. The Bluetooth headset and the Bluetooth transmitter have been paired at the factory settings. Plug the Bluetooth adapter into the USB port of the computer, and the headset will automatically connect after it is turned on. If you cannot connect, please confirm whether the headset is connected to your mobile phone. If it is connected to the mobile phone, please disconnect the bluetooth connection of the mobile phone, then insert the bluetooth transmitter into the USB of the computer and reconnect the headset.

21. How to re-pair the Bluetooth transmitter with the headset: Insert the Bluetooth transmitter into the USB port of the computer. After the device is recognized, the blue indicator light flashes every 2 seconds. Use a paperclip to press the internal pairing button through the small hole of the shell 2 seconds to make the Bluetooth transmitter enter the mandatory pairing state (the blue indicator light of the Bluetooth transmitter flashes every 0.5 seconds).
    When the headset is turned off, press and hold the “MBF” button for6 seconds to make the headset enter the pairing state.
    After the Bluetooth transmitter and the Bluetooth headset are paired and successfully connected, there.will be a voice prompt “Connected”, and the blue indicator light of the Bluetooth transmitter will be on.

22. Headset restores the factory setting
    under the shutdown state, long press “MFB” button for 10 seconds to sound the prompt “beep” when the factory setting is completed. The blue light and red light of the headset double flash 3 times at the same time.(Note: Headphone recovery from factory settings removes all previous pairing information)

Warm tips:
To maintain the normal life of the battery, ensure that the product is used at least once or more in 2 weeks and replenish the power after use.

Notes

1. Do not use the headphones during charging.
2. When wearing headphones outdoors, choose a safe sports field, road, and adjust the appropriate volume, pay attention to traffic safety
3. Do not use headphones while driving a motor vehicle

Basic Operation Instruction

To avoid wasting your valuable time, pls check the following before sending repairs.

Product Features

1. Headset is available in three connectivity modes (normal Bluetooth mode, Bluetooth low latency mode (with a transmitter) and 3.5mm wired mode) for a variety of scenarios and devices.
2. Headset has two sound modes of game and music, both listening to songs and games.
3. Thanks to 35ms super low latency you can enjoy the game experience of audio and video synchronization.
4. Headphone microphone is a retractable microphone that can be adjusted according to the usage scenarios.
5. Headset is built-in 1000mA capacity battery with super long life and up to 50 hours without LED.
6. Headsets are ergonomic designed, tough appearance and domineering appearance.
7. Headphones feature large skin-stick leather earcases for comfortable wear.

Note

1. This product is compatible with Microsoft Windows 7/8/10, Apple Mac Os system, Android system and lOS system;
2. If it is not available on the operating system or equipment that is not listed, you can contact the after-sales service fora solution;
3. During the use of the product, if there is no sound from the microphone or headset, it may be caused by compatibility problems or improper use, and you can contact the after-sales service to find a solution;
4. During the use of the product, if any part is damaged, such as a broken cable, please stop using it and contact the after-sales service for a solution to avoid unnecessary losses.
5. During the use of the product, if the headset does not respond for a long time, you can use a sharp object such as a paper clip to press the headset reset button for 1 second, and the headset can be forced to shut down.
6. If you want to know more information, please visit Somic’s official website www.itsomic.com

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequeney energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet ona circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be u sed in portable exposure condition without restriction

References

• SOMIC- Gaming Headset & TWS Earbuds, Hear The World – itsomic

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>