SOMiC GS401 2.4G Wireless Gaming Headset User Guide
- June 5, 2024
- SOMiC
Table of Contents
SOMiC GS401 2.4G Wireless Gaming Headset
Connect the microphone
Warning: It is forbidden to insert the microphone into the AUX interface, which will cause the headset to fail to turn on!
Headset Charging
1. When the headset is charged through USB charging cable, the indicator
light will glow solid red. When the headset is fully charged, the indicator
light will glow solid green.
2. If the power of headset is less than 1096, the indicator light will lash
red. Please charge in time.
Headphones-automatic connection instructions
- Insert the USB receiver into the USB port of the computer/host, the blue indicator of the USB receiver flashes;
- Press and hold the power button of the headset for 3 seconds, release the headset when the light is on, and the power on is successful;
- The USB receiver automatically connects to the headset. When the blue light of the USB receiver is always on, the connection is successful;
Note: boot failed, please try again after charging
Headphones-manual connection
When the headset fails to connect automatically, you need to connect manually.
- The headset is tumed on, the USB receiver is plugged into the computer/host USB port, and the blue light flashes.
- Long press the microphone on/off button for 3 seconds, the blue light of the headset flashes quickly and then release it to enter the forced pairing
- The blue light of the USB receiver is on and the connection is successful
Headset Controls
-
Power on/off
Press the power button for 3 seconds, the headset will powered on/off automatically. -
Mode switch
Press the mode switch button once to switch the sound mode ma The color of the headset light represents the corresponding mode.
Colorful:Game mode White: Video mode Blue:Tallk mode -
Light on/off
Press the light button once to turn the headset light on/off -
Wired mode
Use a 3.5mm audio cable to plug into the headset AUX interface 0, and the other end into the host.
Note: In wired mode, all buttons are disabled except for adjusting the volume +/. -
Microphone on/off
Press the microphone button once to turn the microphone on/off
Cautions
- The headset is compatible with Microsoft Windows7/8/10, Apple Mac 0S systems, and can be used on PS4.
- If the headset is used on an unlisted operating system or device, it may not work properly.Please contact after-sales service for solutions.
- If there is no sound in the microphone or head set during use, it may be caused by driver compatibility problems or improper use. Please contact after-sales service for solutions,
- If the headset is damaged during use, for example, the cable is broken, please stop using it and contact after-sales service for solutions.
- IF the headset does not respond for a long time, please use a paper clip or other sharp objects to press the reset button for 3 seconds, and the headset can be powered off automatically.
- If you want to know more information, please visit Somic’s offical website www.itsomic.com.
Troubleshooting
Q: Why is there no sound in the headset?
A: 1. Make sure the USB receiver is properly connected to the computer, clean
the interfaces and try again;
2. Make sure the sound is turned on in your computer/software Settings and
GS401 is set as the output device;
3. Check if the volume knob of GS401l is already turned on.
Q:Why isn’t the microphone working?
A: 1. Make sure the microphone is properly connected to the headset, clean\
the connecting terminals and try again;
2. Make sure the microphone switch of G5401 is turned on:
3. Make sure the microphone is turned on in your computer/software Settings
and GS401 is set as the input device
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>