nedis HPBT1201BK Over Ear Headphones User Guide

: June 17, 2024
: nedis

Table of Contents

nedis HPBT1201BK Over-Ear Headphones
Product Information
Product Usage Instructions
Specifications
Intended use
Main parts
Safety instructions
Using the product
Switching on the product
Controlling the music
Declaration of Conformity
Documents / Resources

nedis HPBT1201BK Over-Ear Headphones

nedis-HPBT1201BK-Over-Ear-Headphones-product

Product Information

Specifications

Model: HPBT1201BK
Power Input: 5 VDC; 0.5 A
Bluetooth Frequency: 2402 – 2480 MHz
Frequency Response: 20 – 20,000 Hz
Bluetooth Transmit Power: 8 dBm
Driver Size: 40 mm
Battery Type: Lithium-ion, 3.7 V / 250 mAh
Playback Time: Up to 2 hours
Standby Time: Up to 20 hours
Charging Time: 250 hours
Voice Assistant Support: Siri, Google Assistant

Product Usage Instructions

Intended Use

The Nedis HPBT1201BK are Bluetooth headphones designed for enjoying music wirelessly with any Bluetooth-enabled audio/video device.
The headphones feature foldable ear cups for convenient storage.
Please avoid any modifications to ensure safety, warranty, and proper functioning.

Main Parts

Status indicator LED
Next song / Volume up button
On/off / play/pause button
Previous song / Volume down button
USB-C port
3.5 mm input
Built-in microphone
USB-C cable
3.5 mm audio jack

Charging the Product

Plug the USB-C cable into the USB-C port on the headphones.
Connect the other end of the USB-C cable to a computer or power adapter for charging.

Switching On and Pairing

To activate the pairing mode, switch on the headphones.
If pairing mode is not activated automatically, press and hold the play/pause button for 5 seconds until the status indicator LED blinks red and blue.
Enable Bluetooth on your device and select “HPBT1201BK” from the available Bluetooth devices list.

Safety Instructions

Avoid listening at high volume levels for extended periods to prevent hearing damage.

FAQ

How do I know if the headphones are in pairing mode?

The status indicator LED will blink red and blue when the headphones are in pairing mode.

How long does it take to fully charge the headphones?

The headphones require approximately 250 hours for a full charge.

Specifications

Product	Over-Ear headphones
Article number	HPBT1201BK
Power input	5 VDC ; 0.5 A
Bluetooth® version	5.0
Bluetooth® frequency range	2402 – 2480 MHz
Frequency response	20 – 20,000 Hz
Max. radio transmits power	8 dBm
Impedance	16 Ω
Driver size	40 mm
Battery type	Lithium-ion, 3.7 V / 250 mAh
Charging time	Up to 2 hours
Playtime	Up to 20 hours
Standby time	250 hours
Built-in microphone	Yes
Voice control	Siri, Google Assistant

For more information see the extended manual online: ned.is/hpbt1201bk

Intended use

The Nedis HPBT1201BK are Bluetooth headphones with which you can enjoy music at any time and anywhere.
The product can be paired with any Bluetooth-enabled audio/video device.
The ear cups can be folded for easy storage.
Any modification of the product may have consequences for safety, warranty, and proper functioning.

Main parts

(image A)

Status indicator LED
Next song / Volume up button
On/off / play / pause button
Previous song / Volume down button
USB-C port
3.5 mm input
Built-in microphone
USB-C cable
3.5 mm audio jack

Safety instructions

Icon	Description
Indication to explain that the product can cause hearing damage. Do not

listen at high volume levels for long periods.

WARNING

To prevent possible hearing damage, do not listen at high volume levels for long periods.
Using headphones with both ears covered while participating in traffic is discouraged and may be illegal in some areas.
Ensure you have fully read and understood the instructions in this document before you install or use the product.
Keep the packaging and this document for future reference.
Only use the product as described in this document.
Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
Do not drop the product and avoid bumping.
This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
Unplug the product from the power source and other equipment if problems occur.
Do not expose the product to water or moisture.
Do not use any charger other than that specifically provided for use with the product.

Using the product

Due to the wide variety of products with a Bluetooth connection, we cannot guarantee that all devices will be recognized or all operating options can function.

Charging the product

Plug the USB-C cable A8 into the USB-C port A5.
Plug the other end of the USB-C cable A8 into a computer or power adapter.

Switching on the product

Press and hold the on/off / play/pause button A3 for 2 seconds.

Pairing the headphones to a Bluetooth audio source

1. Switch on the product to activate pairing mode.
- The status indicator LED A1 blinks red and blue to indicate pairing mode is active.
When pairing mode is not activated automatically, press and hold A3 for 5 seconds.
Enable Bluetooth on the device you want to pair the headphones with.
Select “HPBT1201BK” from the list of available Bluetooth devices on your device.

When paired, A1 flashes blue every 5 seconds.
If the headphones have been paired with another device before, make sure that the device is switched off.
If the headphones lose connection to the Bluetooth source, they will automatically reconnect when back in range and switched on.

Controlling the music

Press A3 to play or pause the music.
Press the next song/volume up A2 to skip to the next song.
Press the previous song/volume down button A4 to go back to the start of the song. Press again to go to the previous song.

Controlling the volume

Press and hold A2 to increase the volume.
Press and hold A4 to decrease the volume.

Making phone calls

To answer an incoming call, press A3.
To reject an incoming call, press and hold A3 for 1 second.
To end a call, press A3.
To quickly redial the last called number, double press A3.

Using voice assistant

Press and hold A3 for 1 second to activate the voice assistant on your mobile phone (Siri or Google Assistant).

Switching off the headphones

Press and hold A3 for 4 seconds to switch off the headphones.

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product HPBT1201BK from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully.
This includes, but is not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety data sheet if applicable) can be found and downloaded via: nedis.com/hpbt1201bk#support .
Nedis BV
De Tweeling 28, 5215 MC ’s-Hertogenbosch
The Netherlands
ned.is/hpbt1201bk

Documents / Resources

| nedis HPBT1201BK Over Ear Headphones [pdf] User Guide
HPBT1201BK Over Ear Headphones, HPBT1201BK, Over Ear Headphones, Ear Headphones, Headphones
---|---