SOMiC G810 Wireless Headset User Manual

SOMiC G810 Wireless Headset

Product Features

• Four connection modes, including general Bluetooth mode, Bluetooth low-latency mode (USB-A and Type C connection modes) and 3.5mm wired mode, can be used in various scenarios and devices.
• Game mode and music mode provide you with a versatile experience.
• Equipped with a powerful low-latency engine, you can enjoy the ultra-realistic game experience with a delay as low as 35ms.
• Ergonomic and lightweight design makes it comfortable to wear for a long time.
• Large-capacity lithium battery supports ultra-long endurance.

Package Contents

• 1 x Headset
• 1 x Charging Cable
• 1 x User Manual
• 1 x Bluetooth Transmitter
• 1 x 3.5mm Audio Cable

Specifications

Product Overview

1. Volume + Key: short press for volume up; long press for next track.

2. Volume – Key: short press for volume down; long press for previous track.

3. Bluetooth Indicator Light:
   When turn on the headset, blue light flashes slowly.

   • In paring mode, red light and blue light flash alternately.
   • When a call comes in, blue light flashes quickly; after answering the call, blue light is constant on.
   • When in low battery, red light double flashes for 3 seconds.

4. On/Off Key:

   • Long press for Power On/Off, short press for Play/Pause.
   • Pairing: long press for about 6 seconds with the headset off.
   • Answer/End an incoming call: short press once to answer the call, and long press 1 second to reject the call; during a call, short press once to end the current call.

5. Light Key: turn on/off the logo light.

6. MIC Key: short press once to turn on/off microphone; long press to switch Game Mode/Music Mode; short press twice to switch connection between Bluetooth transmitter/mobile phone.

7. Line-in 3.5mm Audio Port: when inserted into the 3.5mm charging cable, the headset is automatically off. The headset plays the signal of external devices. (The microphone doesn’t support signal input from external wireless devices.)

8. Type-C Charging Port: the specification of the connected charger is DCSV/l000mA. When it is charged, the headset will automatically off.

9. Battery Status Indicator

10. LOGO Lights on Earcups

Quick Start Guide

1. Power On & Paring
   

2. Long press key”➃ ” for about 2 seconds to turn on the headset. If there is pairing history, the headset will auto-reconnect to its last connected device. Otherwise, you will hear voice “paring” and it will go in pairing mode. In pairing mode, Bluetooth devices, such as mobile phones, can locate and connect to the headset.

3. Manual pairing: long press key”➃ ” for 6 seconds to let the headset automatically go in pairing mode.
   

4. The headset should go into pairing mode and the LED will alternate between flashing red & blue. Turn on the phone’s Bluetooth and set it to discoverable state, you could add or locate a new device to connect. Select “SOMIC G810” in the device list and pair it with your device. When you hear voice “connected”, it means the pairing is completed. You will see the blue indicator light flashes slowly.

5. Pairing with Bluetooth Transmitter: in the pairing mode, insert Bluetooth transmitter into Type-C/USB-A interface of computer or Type-C interface of mobile phone. You will hear voice “connected”. At the same time, the Bluetooth indicator light of headset flashes slowly and blue indicator light of Bluetooth transmitter is always on.

6. The headset and Bluetooth transmitter has been paired in factory setting. When Bluetooth transmitter is plugged into the USB port of the computer, the headset will automatically connect to it after turned on.
   ★ Notes: if they can not be paired, please reconnect the headset to Bluetooth transmitter following previous steps.

7. Power off
   With the headset on, long press key”➃”for about 3 seconds. After you hear voice “power off”, the headset turns off.

8. Volume Control
   To increase the volume, click the”+” key(the headset volume will be synced with the devices connected.).
   To reduce the volume, click the”-” key(the headset volume will be synced with the devices connected.).

9. Switch Songs
   Next track: long press the volume”+” key.
   Previous track: long press the volume”-” key.

10. Mute MIC

11. During a call, press key”➅ ” to turn on/off the microphone.

12. Game Mode/Music mode: long press key”➅ ” to switch Game Mode/Music mode. You will hear “Bee Play Mode” or “Music Mode”.

13. Connection Switching Mode: when separately paired with Bluetooth transmitter and mobile phone’s Bluetooth, short press key”➅ ” twice to switch connection between them. When you add “switch to Bluetooth mode”, you will hear tone “Bluetooth”. When you add “switch to Bluetooth transmitter mode”, you will hear tone “USB dongle”. When two modes are successfully connected to, you will both hear tones “connected”.
    ★ Caution: when headset is in Bluetooth mode, if you wrongly switch it to Bluetooth transmitter mode without plugging in the transmitter, the headset has no sound until it is switched back to Bluetooth mode.

14. Light Key
    Press key”➄ ” by once to turn on/off the logo light on earcups.

15. Incoming Call
    If there is an incoming call, you will hear voice “incoming call”, and the blue light of headset flashes.
    Short press key”➃ ” to answer the call.
    Short press key”➃” again to hang up the call.
    Long press 1 seconds to reject the incoming call.

16. Last Number Redial
    Double click key”➃”, and the last number will be automatically redialed by the phone.

17. Low Battery Warning
    When it is in low power, there is a voice prompt “low power” every 4 minutes, and the red indicator light of the headset flashes twice every 3 seconds.

18. Charging Instructions

19. The headset has a built-in lithium battery. It is highly recommended that you charge the headset before using it for the first time.

20. The headset will automatically turn down when charging plug is inserted into key”➇ “. At the same time, the red indicator light will be solid. After the headset is fully charged, after the headset is fully charged, the red indicator light will die and turn on solid green.

21. Factory Reset
    With the headset off, long press key”© ” for 10 seconds to restore factory settings. When the reset is completed, you will hear sound “beep” twice and the blue light and red light of the headset will flash 3 times.

22. Wired Mode
    Connect via a 3.5mm audio cable. In this mode, only the audio output will remain available.
    

Troubleshooting

time.
Unable to pair| (Bluetooth Mode) Smartphone hasn’t yet opened the Bluetooth function or hasn’t yet set the bluetooth in the discoverable status.| Start Bluetooth and set it to discoverable mode.
(Bluetooth Mode) When paired, the headphone is too far from the Bluetooth device.| Ensure that both devices are within the one-meter range and stay away from the interference sources like GPS/WiFi.
The battery power is insufficient.| Charge the battery in time.
Loud noise| The battery power is insufficient.| Charge the battery in time.
Intermittent audio| (Bluetooth Mode) The headphone is too far from the Bluetooth device.| Try moving the headset closer to your device.
(Bluetooth Mode) There are obstacles between the headset and the Bluetooth device.| Make sure no obstacles block
the communication.

Caution

1. The headset is compatible with Microsoft Windows7 /8/10, Apple 10S and Mac OS systems, XBOX and PS4. If it is not available on the operating systems or devices that are not listed, please contact our after-sales service team for help.
2. Do not use headphones during charging.
3. Please charge the product before using it for the first time.
4. In order to maintain the normal battery life, please ensure that the product is used at least once in two weeks. And charge the headset in time after use.
5. Chargers must be produced by regular manufacturers and certified by CCC.
6. If the headset is in pairing mode and you are still unable to locate it under Bluetooth settings on your device, please try turning off your device’s Bluetooth and turning it back on, or reset factory settings.If there is no sound from the microphone or headset when using the headset, it may be the compatibility problem or improper use. Please contact our after-sales service team for help.
7. If any part is damaged, please stop using it and contact our after-sales service team in time to avoid unnecessary losses.
8. If you want to know more information, please visit Somic’s official website www.itsomic.com.

Warranty

SOMIC products are covered by a 12-month limited warranty from the date of its original purchase. If any problem occurs, please contact our support team, we will always be here to help you solve the problem. If you want to know more information, please visit Somic’s official website
www.itsomic.com.

Service E-mail

NORTH AMERICA
support.us@itsomic.com(US)
support.ca@itsomic.com(CA)

Thanks

Thanks you for choosing our G810 Headsets.
please read this manual carefully and keep it for future reference.

Customer Support

MANUFACTURER
Dongguan Branch of Guangdong SOMIC High-Tech Co., Ltd
Address:
No.9, Lianxin Road, Shangj iao Community, Chang’an Town,Dongguan 523000,Guangdong, China
www.itsomic.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>