SOMiC GS510 Wireless Gaming Headset User Manual
- June 6, 2024
- SOMiC
Table of Contents
GS510
Bluetooth
Headphone Connection Instructions
-
Long press the headphone power button for 2 seconds, release the headphone light after it turns on, and the power on is successful;
-
When the power on is successful, the headset will automatically enter the pairing state, and the power-on indicator will flash blue once per second;
-
Open the Bluetooth settings when connecting for the first time, search and click the device name ‘SOMIC STINCOO GS510″
You can connect, and the power-on indicator will be blue after the connection is successful; -
When there is a pairing record, the headset will automatically reconnect after turning on;
-
1f the connection fails, it will automatically enter the pairing mode. If there is no device connection within 3 minutes, the headset will automatically shut down.
Note:
- Power-on fails, please retry after charging.
- 1f you need to restore the factory settings, press and hold the power button for 10 seconds in the shutdown state. After hearing the music, it means that the factory settings have been restored.
Features
Power on/off
In the off state, long-press the power button for 2 seconds, the headset
will automatically turn on;
In the power-on state, press and hold the power button for 3 seconds, the
headset will automatically turn off;
Mode switch
Short press the mode switching key mode once to switch the sound effect
mode;
Music pause/play
Short press the power button __ once to pause/play the music;
Call mode
When a call comes in, short press the power button once to answer the call;
When a call comes in, short press the power button twice to reject the call;
During a call, short press the power button once to hang up the call;
Wired mode
Insert the 3.5mm audio cable into the AUX interface of the earphone, and
connect the other end to the device to be used.
Note: In wired mode, all functions are disabled except for volume adjustment and microphone function.
Light on/off
Three-click the light touch key to turn on/off the headset light.
Light color switch
Press and hold the light touch key for 2 seconds to switch the light color.
Charge
-
When the headset is charged via the USB charging cable, the battery indicator shows a steady orange light;
When the headset is fully charged, the battery indicator shows steady green. -
When the power of the headset is less than 10%, the power-on indicator will flash orange, please charge it in time.
Note
- This product is compatible with Microsoft Windows 7/8/10, Apple Mac OS system, Android system, and IOS system;
- If it is not available on the operating system or equipment that is not listed, you can contact the after-sales service for a solution;
- During the use of the product, if there is no sound from the microphone or headset, it may be caused by compatibility problems or improper use, and you can contact the after-sales service to find a solution;
- During the use of the product, if any part is damaged, such as a broken cable, please stop using it and contact the after-sales service for a solution to avoid unnecessarily
- During the use of the product, if the headset does not respond for a long time, you can use a sharp object such as a paper clip to press the headset reset button for 1 second, and the headset can be forced to shut down.
- If you want to know more information, please visit Somic’s official website itsomic.com.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
www.comic.cn
400-698-9993
itsomic@l63.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>