OKIN EASE RF399A Remote Control Instructions
- June 6, 2024
- OKIN
Table of Contents
OKIN EASE RF399A Remote Control Instructions
Instruction of RF399A
1.1 ZG button ⑥
Click the ZG button, the actuator moves to ZG position, stop when click any
button during the movement;
Press and hold the ZG button for 5s, timer LED of remote flashes, the control
box records current position as ZG position;
When in the process of moving to memory positions, the head and foot actuators
move first, then the tilt and lumbar actuators move;
1.2Head up ①
Press and hold HEAD UP button of remote, head actuator moves out, stop when released；
1.3Head down ②
Press and hold HEAD DOWN button of remote, head actuator moves in, stop when released；
1.4Foot up ③
Pressa and hold FOOT UP button of remote, foot actuator moves out, stop when released;
1.5 Foot down ④
Press and hold FOOT DOWN button of remote, foot actuator moves in , stop when
released；
When moving to flat position, lumbar actuator and tilt actuator move first,
after 500ms, head and foot actuators start moving;
1.6 Flat ⑥
Click FLAT button, the bed goes flat, stop when click any button during the process of going flat；
FCC Warning：
Please take attention that changes or modification not expressly approved by
the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept
any interference received, including interference that may cause undesired
operation.
ISED RSS Warning:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.