ZEBRONICS ZEB-YOGA 4 Wireless Neckband Earphone User Manual
- June 5, 2024
- ZEBRONICS
Table of Contents
ZEBRONICS ZEB-YOGA 4 Wireless Neckband Earphone
Thank You for purchasing ZEB-YOGA 4 Wireless neckband earphones. Please read this user manual carefully before operation & save it for future reference.
Note:
- Charge the wireless earphones fully before using it.
- Please charge the product with a power adapter output rated DC 5V.
- Do not self-disassemble the product or it will result in the failure of the warranty.
- Make sure not to use this product at any high-temperature or high humidity environment.
Caution:
Listening at high volume can cause hearing impairment. Please limit your usage
time at high volume.
Features
- Wireless BT earphones with Neckband
- Volume/Media Control
- Call Function
- Voice Assistant support
- Built-In Rechargeable Battery
- Flexible Neckband
Specifications
- BT Version: 5.2
- Supported BT Profile: HFP/ SPP/ A2DP/AVRCP
- Drive size: 14mm
- Speaker impedance: 162
- Playback time: 22h*
- Charging time: 2h
- Talk time: 22h*
- Net. weight: 24.8g
Package contents
- Neckband: 10
- Earbuds: 4U
- Charging cable 1U
- QR Code Guide 1U
Usage Instruction
Bluetooth Pairing Instructions:
STEP 1 Press and hold the MFB to power ONN the earphones and to take them
into pairing mode with Red & Blue LED blinking alternatively.
STEP 2 Switch ON the Bluetooth in your mobile phone & search for the BT
name “ZEBYOGA 4”
STEP 3 Once the BT name is visible in your mobile phone, tap to connect
it.
Product Representation
Button usage
- MFB Single short press: Play/Pause & Answer/End Call
- MFB Double short press: Redial
- MFB press for 3 sec: Wakes Voice assistant
- MFB Long press: Call Reject
- Short press +/-: Volume Up and Down
- Long press +/- : Next/ Previous
Activating Smart Phone’s Voice Assistant:
When the neckband is connected to a mobile phone, Press and hold the MFB for 3
seconds to activate the voice assistant.
Note: Smartphones should have an active internet connection to use the
voice assistant function.
Call Function:
- Short press the MFB to attend or end the incoming call.
- Press and Hold the MFB for 2 seconds to reject the incoming call.
- Double press the MFB to redial the last dialed number.
Charging Instruction:
Connect the Type-C charging cable to the charging port of the earphones &
connect the other end to the DC5V adapter.
LED Indication:
- Charging indication: Red LED glows
- Full charge indication: LED turns Off
- BT Discover mode: Red & Blue LED blinks rapidly till it gets paired
- When connected to a Phone: Blue LED will blink once in an interval of 5 sec
ISO 9001:2015 Certified Company www.zebronics.com