OKIN RF5011 Remote Control Instructions
- June 6, 2024
- OKIN
Table of Contents
A Phoenix Mecano Company| Issue Department: Bedding Division| Date: 1
2017-8-15
---|---|---
System Instruction| Author:|
|
Instruction of RF5011| Edition:| I 1.1
Page| 1 of 4
Instruction of RF5011
A Phoenix Mecano Company| Issue Department: Bedding Division| Date: 1
2017-8-15
---|---|---
System Instruction| Author:|
|
Instruction of RF5011| Edition:| I 1.1
Page| 2 of 4
Figure 1 button of remote
1 Item
1.1 Stop snoring button ⑤
Click the Stop snoring button, the head actuator moves to the Stop snoring
position, stop when clicking any button during the movement.
1.2 Head up ⑦
Press and hold the HEAD-UP button of the remote, the head actuator moves out,
stop when released；
1.3 Head down ⑧
Press and hold the HEAD DOWN button of the remote, head actuator moves in,
stop when released ；
1.4 Foot up ⑩
Press and hold FOOT UP button of remote, foot actuator moves out, stop when
released;
1.5 foot down ⑾
Press and hold FOOT DOWN button of remote, foot actuator moves in, stop
when released: When moving to a flat position, lumbar actuator and tilt
actuator move first after 500ms, head and foot actuators start moving;
1.6 Flat ⑨
Click F L AT button, the bed goes flat, stop when clicking any button during
the process of going flat ；
A Phoenix Mecano Company| Issue Department: Bedding Division| Date: 1
2017-8-15
---|---|---
System Instruction| Author:|
|
Instruction of RF5011| Edition:| I 1.1
Page| 3 of 4
1.7 Memory location ④ ⑥
Click memory location to set the bed to the set location.
1.8 Pair ②
Click Pair for one second to pair the remote and bed.
1.9 Massage head ①
Click MASSAGE HEAD button, head massage motor switches massage intensity,
massage intensity switches among 0-1-2-3 ；
1.10 Massage foot ③
Click MASSAGE foot button, head massage motor switches massage intensity,
massage intensity switches among 0-1-2-3 ；
FCC Warning：
Please take attention that changes or modifications not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment. This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
ISED RSS Warning:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.
A Phoenix Mecano Company| Issue Department: Bedding Division| Date: 1
2017-8-15
---|---|---
System Instruction| Author:|
|
Instruction of RF5011| Edition:| I 1.1
Page| 4 of 4