DEWERT OKIN RF-ENHANCE Wireless Actuator User Guide
- June 5, 2024
- DEWERT OKIN
Table of Contents
DEWERT OKIN RF-ENHANCE Wireless Actuator
For wireless operation of your motorized comfort bed system Wireless, ergonomic, reliable, easy handling, elegant design Activate the pairing mode.
Pairing method
-
Connect all components to the drive system.
-
Insert the plug into the socket.
-
Press the pairing button on the HE150 twice until the pairing-LED turns on. You now have 2s for the pairing process.
-
Press button (1) and (2) of the RF-ENHANCE simultaneously until the pairing-LED extinguishes, the backlight and the LED’s of the RF-ENHANCE flashes.
The learning mode is completed. -
Pairing a second drive system: Press button (4) and (5) of the RF-ENHANCE simultaneously until the pairing-LED extinguishes, the backlight and the LED’s of the RF-ENHANCE flashes. The learning mode is completed.
Note: T he distance between transmitter and receiver should be less than two meters for pairing.
Button / Function
1 – 22: Customer specific
1 + 2: Pairing (System 1)
4 + 5: Pairing (System 2)
FCC Warning
FCC: This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Note: Any changes or modifications not approved by the party responsible
for compliance could void the user’s authority to operate the
equipment.
The device is compliance with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance.