OKIN RF-ENHANCE Wireless Remote Control User Guide
- June 5, 2024
- OKIN
Table of Contents
OKIN RF-ENHANCE Wireless Remote Control
Pairing RF-ENHANCE
For wireless operation of your motorized comfort bed system
Wireless, ergonomic, reliable, easy handling, elegant design Activate the
pairing mode.
Pairing method
-
Connect all components to the drive system.
-
Insert the plug into the socket.
-
Press the pairing button on the HE150 twice until the pairing-LED turns on. You now have 2s for the pairing process.
-
Press button (1) and (2) of the RF-ENHANCE simultaneously until the pairing LED extinguishes, the backlight and the LED’s of the RF-ENHANCE flashes.
The learning mode is completed. -
Pairing a second drive system: Press button (4) and (5) of the RF-ENHANCE simultaneously until the pairing-LED extinguishes, the backlight and the LED’s of the RF-ENHANCE flashes. The learning mode is completed.Note: The distance between transmitter and receiver should be less than two meters for pairing.
FCC Warning / ISED Warning
FCC: This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: this device may not cause harmful
interference, and this device must accept any interference received,
including interference that may cause undesired operation.
Note: Any changes or modifications not approved by the party responsible
for compliance could void the user’s authority to operate the equipment.This
device complies with Industry Canada RSS-210 standard(s). Operation is subject
to the following two conditions:this device may not cause interference, and
this device must accept any interference, including interference that may
cause undesired operation of the device.”The device is in compliance with RF
exposure guidelines, users can obtain Canadian information on RF exposure and
compliance.