clabel CT521B Portable Label Printer Instruction Manual

clabel CT521B Portable Label Printer

Packing List

Product Overview

Open cover

Press and hold the upper cover, turn it counterclockwise to open, turn it clockwise to close.

Power Key

• Flick to the right for 2 seconds without letting go, the printer is turned on.
• Flick to the right once, and move a sheet of paper forward.
• Flick to the right twice to print the self-test page.

Indicator light

• Slow flashing blue light: indicates that the Bluetooth is not connected.
• The blue light is always on: indicates that the Bluetooth is connected.
• The blue light flashes quickly: the battery is low, please charge it.
• The red light is always on: it is charging.
• The green light is always on: the battery is fully charged.

Preparation before printing

1. Toggle the power button to the right for 2 seconds,The indicator lights up and the printer switches on.
2. Press the upper cover with the palm of your hand and turn it counterclockwise to open the upper cover.
3. Load the consumables face up into the paper compartment.
4. Align the top cover and place it well.
5. Press the upper cover with the palm of your hand and turn it clockwise to close the upper cover.

Mobile print

1. Download and install the ” Clabel mini ” APP.Design & print App easy to download and use.

2. Enter the phone system settings and turn on Bluetooth.

3. And click the ” Edit ” button.
   

4. Click the icon in the upper right corner.

5. Click the Bluetooth name of the printer to connect.The bluetooth name can be get from the device information by pressing the power button two times.

6. Add the content that needs to be printed and click the ” Print ” button to print.

7. And click the ” OK ” button to wait for printing to be completed.

Parameters

Shenzhen Dudian Technology Co., Ltd.
Add.: 11th Floor, Building 3, COFCO Business Park, Dabao Road, District 67, Xin’an Street, Bao’an District, Shenzhen
Made in China

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
3. The device has been evaluated to meet general RF exposure requirement.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>