Clabel CT221B Mini Bluetooth Label Printer User Manual
- June 17, 2024
- clabel
Table of Contents
Clabel CT221B Mini Bluetooth Label Printer
Packing List
Appearance Component
Open the cover
Function Description
Description Of Indicator Lights
- Light display priority : charge status light > abnormal status light> Bluetooth status light.
- If you need to check the printer exceptions and Bluetooth status while charging, please end the charge or go to the mobile software to check.
Paper Roll Loading
The paper compartment cover can be opened by squeezing the pressure points on both sides with your fingers and pulling upwards. (fig.1)
Install the label sheet as shown in the diagram below (fig.2)
- Push the jammer lock switch to “OPEN”
- Place the label paper in the paper compartment and press it firmly to the left
- Push the jammer to the left until the label is tight
- Push the jammer lock switch to “CLOSE” to lock it
Pull out some of the label papers and close the paper compartment cover, making sure that both sides of the cover are closed. (fig.3)
TIPS
The printer supports printing gap paper and black standard paper, the factory default mode is gap mode.If you want to print black standard paper, please change “black mark” in the paper settings on the app.
Mobile Phone Printing Instruction
- Scan the QR code below with a mobile phone to download “Clabel Trade”.
- Please follow the software instructions below to operate the software.
- Mobile phone printing ONLY for Bluetooth version.
Computer Printing Instruction
Windows
Visit the website: https://ga.ctaiot.com to download “Clabel trade” and driver.
Download the driver from the above URL and read the instructions on driver installation/software installation on the website.
Trouble Shooting
Symptom | Cause | Correction |
---|---|---|
**** |
– Low version of mobile
| – Machine only suitable for Android 6.0 or above.
– Check if the machine has been turned on. And turn on the permission for the Bluetooth and location in your mobile phone. (Note: Due to the mobile phone system’s requirements, Android phones will use your location when it’s connected, you need to turn on location.)
| phone.
Bluetooth failed| – The Bluetooth
to connect| permissi o n is n o t
| enabled.
| ****
– The label size is not
| – Please select the corresponding label size before printing.
– The content can be adjusted through the adjustment button on the APP.
– Click the power button on the printer to locate the paper gap.
– Check if the paper jammer in the paper bin is locked on the left, and close to the labels.
– Go to our product page to watch the video.
| selected correctly.
Print is not
| – Software operation is improper.
centered, offset| – Clearance mismatch.
| – Paper jammer is not
| locked to the left.
Symptom| Cause| Correction
---|---|---
| ****
– Low version of mobile
| – Machine only suitable for Android 6.0 or above.
– Check if the machine has been turned on. And turn on the permission for the Bluetooth and location in your mobile phone. (Note: Due to the mobile phone system’s requirements, Android phones will use your location when it’s connected, you need to turn on location.)
| phone.
Bluetooth failed| – The Bluetooth
to connect| permissi o n is n o t
| enabled.
| ****
– The label size is not
| – Please select the corresponding label size before printing.
– The content can be adjusted through the adjustment button on the APP.
– Click the power button on the printer to locate the paper gap.
– Check if the paper jammer in the paper bin is locked on the left, and close to the labels.
– Go to our product page to watch the video.
| selected correctly.
Print is not
| – Software operation is improper.
centered, offset| – Clearance mismatch.
| – Paper jammer is not
| locked to the left.
Specification
Print technology | Thermal printing |
---|---|
Print resolution | 203dpi |
Media type | Gap Paper, Black standard paper |
Print speed | 50mm/s |
Label width | 25-54mm |
Battery capacity | 1200 mAh |
Interface | USB, Bluetooth |
Power input | Output, DC 5V=2A |
Machine size | 125mm’87mm•63mm |
Machine weight | 240g |
Barcode | CODE128,CODE39,CODE93,EAN8, EAN13,EAN128,UPC-A,UPC-E,ITF14 |
QR code | QR CODE |
Supported operation system | Andiod 6, iOS10, Windows XP, and Above |
- Shenzhen Dudian Technology Co., Ltd.
- 11th Floor, Building 3, COFCO Business Park, Dabao Road,
- District 67, Xin’an Street, Baoan District, Shenzhen
FCC Statement
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different. from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- NOTE : This device and its antenna(s) must not be co-located operation in conjunction with any other antenna or transmitter
RF Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated at a minimum distance of 20cm from the radiator of your body. This device and its antenna(s) must not be co-located or operate in conjunction with any other antenna or transmitter
“This device complies with Industry Canada’s license-exempt RSSs. Operation is
subject to the following two conditions:
(1) This device may not cause interference; and (2) This device must accept
any interference, including interference that maycause undesired operation of
the device.”
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>