clabel Portable Label Printer Instruction Manual

Portable Label Printer
Instruction Manual

PACKING LIST

1pc Printer| lpc USB-type-c

PRODUCT OVERVIEW

Power Button

• Press and hold for2 seconds to turn on the printer.
• Press one time, the printer will print the last label.
• Press two times, the printer prints the device information.

Indicator

• Blue light flashing: Bluetooth is not connected.
• Blue light on: Bluetooth is connected.
• Red light flashing: low battery.
• Red light on: charging (Light will turn off when fully charged).

Paper bin cover Open Button

• Push the button up to open the paper bin cover.

PREPARATION BEFORE PRINTING

1. Press and hold the power button for 2 seconds to turn on the printer.
2. Push the button up to open the paper bin cover.
3. Put the label paper upside down into the paper bin.
4. Close the paper bin cover.

Mobile Phone Printing Instruction

1. Download and install the”Clabel min i”APP. Design & Print App easy to download and use
2. Enter the phone system settings and turn on Bluetooth.
3. And click the “Edit” button.
4.  Click the icon in the upper right corner. 
5. Click the Bluetooth name of the printer to connect. The bluetooth name can be get from the device information by pressing the power button two times.
6. Add the content that needs to be printedand click the “Print” button to print.
7. And click the “OK” button to wait for printing to be completed.

Common Problems

Q：Why is there no content in printing?****

– A：Please put the label paper up-side down into the paper bin.

Q：Why will the last content be printed out when press the power button one time?****

– A：If you don’t want to use this function, please go to “My”>”My Device”, and turn off the “Memory Print”function in the Clabel mini APP with the printer connected.

Q：What should I do if all the buttons of the printer are invalid?****

– A：There is a small hole beside the type-c interface at the bottom of the printer, you can force it to power off by pressing it lightly with a needle.

Q：Can it do long any length of label strip?****

– A：Label maker is suitable for gap label paper; it supports CLABEL labels with a width of less than 15 mm.

Q：Approximately how long should it take to ch arge?

– A：About 4 hours.

Q：What labels are compatible with this machine?****

– A：Clabel brand thermal label, you can buy it in the store.

Q：Can 520B label maker machine print with color?****

– A：No, Clabel 520B label maker only can print in black color.

Parameters

Clabel is always committed to providing better products and services to our customers. If you have any dissatisfaction or issues with our label printer for labeling, please contact us, our professional customer service will solve all your problems promptly until you are satisfied!
Shenzhen Dudian Technology Co., Ltd.
[email protected]
Made in China

FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority tooperate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different. from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
NOTE: This device and its antenna(s) must not be co-located oroperation in conjunction with any other antenna or transmitter
RF Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance of 20cm the radiator your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>