YITAHOME FTBFBF-0098 Queen Size Bed Frame Instruction Manual
- June 17, 2024
- YITAHOME
Table of Contents
YITAHOME FTBFBF-0098 Queen Size Bed Frame Instruction Manual
-
Two or more people are required for assembly.
-
To avoid squeaking, please tighten the bolts all the way.
An electric drill is recommended for the assembly. -
Professional installation is highly recommended.
| Item no. | Reference Image | Qty. |
|---|---|---|
| A | X1 | |
| B | X1 | |
| C | X1 | |
| D | X2 | |
| E | X1 | |
| F1 | X1 | |
| F2 | X1 | |
| F3 | X1 | |
| F4 | X1 | |
| G | X1 | |
| H | X1 | |
| I | X1 | |
| J | X1 | |
| K | X2 | |
| L | X1 | |
| M | X2 | |
| N | X16 + 2extra | |
| P | X1 | |
| W | X2 | |
| X | X2 | |
| Y | X12 | |
| Z | X4 | |
| R1 | X1 | |
| R2 | X1 |
Assembly Instruction
Tighten the screws,install the legs.
Take out parts F1 and F3, and lock the iron frame foot K，in the middle
according to the figure. Note that there are 2 holes located on the inner side
of the board. Then lock the bed hanging pieces W/X on the front and rear of
the board, with 3 holes on each side.
Same as Step 3
Noted that the middle cross beam,the direction of the red arrow is the front.
Loosen the screw of headboard side leg and both sides of footboard, hanging
the bracket and tight the inner screw.
Noted that the middle cross beam,the direction of the red arrow is the front.
After aligning all the holes, tighten all the inner screws.
Loosen the screw of the middle of footboard,hanging the bracket and tight the
inner screw.
Installation Completed
Documents / Resources
|
YITAHOME FTBFBF-0098 Queen Size Bed
Frame
[pdf] Instruction Manual
FTBFBF-0098 Queen Size Bed Frame, FTBFBF-0098, Queen Size Bed Frame, Size Bed
Frame, Bed Frame
---|---