Chargers W316 3-in-1 Fast Wireless Charging Station User Manual

W316

3-in-1 Fast Wireless Charging Station
User Manual

*It is recommended use 18W, 9V2A

Charge the Phone/Headphone/Watch

After powering on, the green indicator light turns on and shut off automatically in 3 seconds, indicating the charging stand enters standby mode.
When charging the phone/watch/earbuds, the blue indicator light stays on for 20 seconds and shut off automatically to avoid disturbing.
When the charging process finishes, there will be no indicator light to disturb your sleep at night.
Readjust the position of the charging device when the green indicator light flashes to indicate the device is not properly charging. ( Note: Wireless charging may not work when the phone case is too thick or the material is not friendly for wireless charging.)

Specifications

IMPORTANT SAFETY INSTRUCTIONS

Before using the unit, please read the user manual carefully

• Do not store devices in a high-temperature environment, including heat caused by intense sunlight or other forms of heat. Do not place the device in fire or other excessively hot environments. Exposure to fire or temperature above 212°F (100°C) may cause an explosion.
• Do not use the wireless charger in excess of its output rating. Overloading outputs above rating may result in a risk of fire or injury to persons.
• Do not expose the wireless charger to rain or snow.
• Do not modify, repair, or disassemble the unity. if so, please contact the manufacturer. Switch off the wireless charger when not in use. The wireless charger will automatically switch off when disconnected from its wall charger.

Applicable Devices:

• Samsung Galaxy 510/ 510 Plus/ S10e/Note 10
• Samsung Galaxy S8/ S8 Plus/ Note 8
• Samsung Galaxy S7/ S7 Edge/ S6 Edge Plus/Note 5
• IP hone 13 Series/12 Series/11/11 pro/11 Pro Max/XS/XS/Max/XR/X/8/8Plus
• More cell phones are compatible with QI wireless charge.
• Apple Airpods 2, AirPods Pro (Need to match wireless charging case)
• Apple Watch 7/6/SE/5/4/3/2/1

Note:

1. The Watch Wireless Charging Area supports Apple Watch only.

2. Please remove your phone case before charging if the thickness is >3 mm, or if the phone case will make your phone size longer than 164 mm.

3. Only use a certified QC 3.0 Fast Charging Wall Adapter to power the device. Do not plug into a computer USB port or any other non-certified USB port. We are not responsible for malfunction due to unsupported adapter use.

4. Place your qi-enabled device accurately in the wireless charging area when charging.

5. A QC3.0 fast charging adapter is required when charging 3 devices simultaneously or achieving a fast charging effect.

6. Make sure to disconnect the device from power when cleaning.

7. It is normal and safe to hear a humming noise when getting close to the charger.
   It means that this wireless charger is adjusting its temperature to achieve a more efficient charging speed.

8. If your device can not be fully charged, this may be due to high environmental temperature, please recharge after the temperature is lowered. Our charger has temperature control to safeguard your device when charging.

Q &A:

If the LED light flashes and the wireless charging dock doesn’t work how can I deal with this problem?

1. Make sure your device supports the Qi wireless charging function before using this wireless charger.
2. Check if you use the QC3.0 9v/2a adapter to power our wireless charger.
3. Test with other USB cables.
4. Check whether your devices’ case comes with metal objects. Magnetic and metal attachments will make an LED flash and prevent charging.

FCC warning:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
This device complies with part 15 of the FCC rules. operation is subject to the following two conditions:(1)this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>