Komshine EX39 Mini Handheld FTTx Fusion Splicer User Guide

Komshine EX39 Mini Handheld FTTx Fusion Splicer

Product Information

The EX39 Mini Handheld FTTx Fusion Splicer (FLT) is a lightweight and compact fusion splicer designed for efficient and versatile use. It is suitable for various applications such as replacing electrodes, welding, and heating. The splicer features a durable ceramic fiber pressure head and a mirror design that ensures a uniform light path. It comes with a special 3-in-1 fiber holder that can accommodate jump fiber, flat fiber, pigtail fiber, and bare fiber. The splicer supports fast-splicing in 8 seconds and fast-heating in 18 seconds. It also has a working platform design for aerial work and high- altitude operation adaptability. The product has a rich expansibility and supports the installation of a fiber optic cleaver operating platform for cleaving and splicing work in one step.

The EX39 Mini Handheld FTTx Fusion Splicer has the following specifications:

• Splice Method: Active Clad-Alignment
• Applicable Fibers: SM(ITU-T G.652&G.657) / MM(ITU-T G.651) / DS(ITU-T G.653) / NZDS(ITU-T G.655)
• Compatible Fiber/Cable: 0.25~3.0 mm / indoor flat cable
• Fiber Holder: Fiber Diameter: 8~16 mm, Fiber Cleave Length: Max 128 modes
• Splice Mode: SM: 0.03dB / MM: 0.01dB / DS: 0.04dB / NZDS: 0.04dB / G.657: 0.03dB
• Return Loss: >60dB
• Splicing Time: SM Quick mode: 8 sec / SM Average: 10 sec
• Estimated Splice Loss: Available Quick mode 18 sec. (SM G652 250m 40mm Sleeve) adjustable
• Heating Time: 20mm, 30mm, 40mm, 50mm, 60mm Max 32 modes
• Protection Sleeve Length: 3400mAh Battery Capacity, Typical 120 Cycles (Splice&Heat) per Charge
• Heat Programs: 5000 arcs replaceable Splice / Heating
• Auto-start: Automatic arc calibration by air pressure and temperature
• Automatic Fiber Identification: The last 10,000 splice records and 2,000 result images
• Automatic ARC Identification: 1.96~2.25N
• Results Storage: Tension Test
• Operating Condition: Replaceable Cladding: 80-150m, Coating: 100~1000m

Feature Description

• Efficient, versatile, lightweight & portable
• Working platform design for aerial work
• Special 3-in-1fiber holde
• 3 years warranty
• Electrode life around 5000 times(Replaceable)
• Automatic splicing & automatic heating
• Innovatively no need tools to replace electrodes
• Support 120 times of splicing + heating when fully charged

Main Features

3-IN-1 Fiber Holder

Working platform design for aerial work
High altitude operation adaptability. Not only suitable for aerial work, also suitable for conventional ground work in any environment.

Rich expansibility

fiber optic cleaver operating platform (Optional) Support the placement of cleaver operating platform, do cleaving and splicing work in one step (Operation platform be ordered separately).

Invention patent application number 202210544729.X Utility model patent application number 202221202906.8

Installation instructions

Installation instructions of fiber optic operating platform

1. Step 1: Fasten the fixing base to the back of the splicer with screws
2. Step 2: Insert the support frame into the socket of the base, adjust it to a proper height, and tighten the screws
3. Step 3: Place the cooling tray on the support frame, and make its hole position coincide with the point position on the support plate
4. Step 4: Place the fiber cleaver on the operating table, adjust the depth of the screw to make the rubber pad and the cleaver completely fit

Installation completion effect. Operation platform be ordered separately .

Specification

1. With identical fibres(in room temperature). Measured by cut-back method relevant to ITU-T and IEC standards.
2. 0.25mm fiber,may vary depending on the battery status and operating environment.
3. Splice & Heat cycles based on 40mm shrink tube.
4. Electrode life may vary depending on the operating environment.

Product Display

Packing List

1. Carry bag (Including Suspenders & belts)
2. Power charger
3. Fiber optic cleaver box
4. EX39 Mini Fusion splicer
5. FOCW Cleaning wipes(box)
6. 2 Alcohol bottle
7. FC-20Fiber optic cleaver
8. 3-hole fiber stripper
9. FTS-01 Drop cable stripper
10. FPS-40 Splicing protector sleeves (piece)
11. Cooling tray

HEAD OFFICE
KomShine Technologies Limited
CONTACT US
Add: 2F Bldg. D Qinheng Tech. Pk. Nanjing, JS, 210001, China
TEL: +86 25 66047688
Web: www.KomShine.com
Mail: info@komshine.com

Komshine reserves the right to improve, enhance, or modify the features and specifications of KomShine products without prior notification. Company and product names appearing in this catalogue are resisterd marks or trademarks of respective companies. This catalogue is printed using environmentally friendly paper and ink.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>