ISO tunes Xtra 2.0 Earplug Headphone with Bluetooth User Manual

June 5, 2024
ISO Tunes

ISOtunes LOGO

ISO tunes Extra 2.0 Earplug Headphone with Bluetooth

ISOtunes-Xtra-earbuds-review feature

Important
Please read, understand, and follow all safety information.
Fitting
Isotone’s® XTRA EN352 comes with 4 sets of TRILOGY™ foam ear tips (XS,S,M,L) and 3 sets of silicone ear tips (S,M,L). Choose the size that fits most snugly in your ear canal. Remember, the snugger the fit, the better the noise blocking. The silicone ear tips are intended for use when NOT in noisy situations.
Isotone’s® TRILOGY™ foam ear tips have a threaded core and the sound port on the earbud is also threaded.

1.Twist the foam ear tip counterclockwise to remove and clockwise to place on a new foam ear tip.
2. Carefully compress the foam ear tip on the stem/sound port.
3. Insert the foam/ear tip into your ear as deeply as is comfortable and hold for 5 seconds while the foam expands.
4. Repeat with second ear tip.

Hint:
To open your ear canal wider, lift the top of your ear up and away from your head, as shown in FIG1.

Introduction

Thank you for purchasing ISOtunes® XTRA 2.0 Professional Noise Isolating headphones. These headphones have been specifically designed
for use in noisy environments – allowing you to block out much of the surrounding noise so that you can listen to your music or talk on the phone with less interruption. This product has been tested and meets the European Safety Standard EN352-2:2002 and the ANSI & NIOSH standards for a hearing protector, with a Single Number Rating (SNR) of 36 dB and a Noise Reduction Rating (NRR) of 27 dB. Full testing details are available in the Noise Attenuation section of this booklet.

Noise Attenuation

APPROVAL: Isotone’s® XTRA 2.0 is tested and approved in accordance with ANSI S3.19-1974 Specifications and the European Safety Standard EN 352-2:2002.

ANSI
S3.19-1974
The level of noise entering a person’s ear, when Isotone’s® XTRA 2.0 headphones are worn as directed, is closely approximated by the difference between the A-weighted environmental noise level and the Noise Reduction Rating (NRR). Improper fit of this device will reduce its effectiveness in attenuating noise. Consult the enclosed instructions for proper fitting.

  • A1: Frequency (Hz)
  • A2: Mean Attenuation (dB)
  • A3: Standard Deviation (dB)

Example:

  1. The surrounding noise level measured at the ear is 100 db.
  2. The NRR of Isotone’s® XTRA 2.0 is 27 db.
  3. The noise level entering the ear is approximately equal to 73dB.

Please note that the NRR is based on the attenuation of continuous noise and may not be an accurate indicator of the protection attainable against impulsive noise, such as gunfire.

EN352

  • B1: Frequency (Hz)
  • B2: Mean Attenuation (dB)
  • B3: Standard Deviation (dB)
  • B4: Assumed Protection Value (APV) (dB)
  • B5:
    • H = Hearing protection estimation for high ] frequency sounds (f ≥ 2000Hz)
    • M = Hearing protection estimation for medium frequency sounds (500 Hz < f < 2000Hz)
    • L = Hearing protection estimation for low frequency sounds (f ≤ 500Hz)

The EU declaration of conformity can be accessed at www.isotunes.co.uk/EU- declaration-of-conformity
The products will be certified to the Product standard EN 352-2:2002 and the PPE Regulation 2016/425

Sarema™ Technology
Isotone’s® XTRA 2.0 incorporates Sarema™ Technology, therefore its volume output has been limited to 85 decibels (IT-22 and IT-27) and 79 decibels (IT-25). Isotone’s® devices with Sarema™ Technology are OSHA, NIOSH, and ANSI compliant and, when designated, meet the European Safety Standard EN352.

Cleaning and Maintenance

Trilogy foam ear tips are disposable. To ensure peak performance, we recommend replacing TRILOGY™ Foam Tips every three months or when they become soiled. In order to purchase additional tips, please go to www.ISOtunes.co.uk
Clean your Isotone’s® XTRA EN352 by gently wiping them with a clean damp cloth. Mild soap can be applied to the cloth.
Do not use abrasive cleaning solvents to clean the headset. Avoid scratching the headset with sharp objects, as this may cause damage. Keep the headset away from high temperature areas.

  • Clean your Isotone’s XTRA 2.0 by gently wiping them with a clean, damp cloth with mild soap.
  • Do not use abrasive cleaning solvents to clean the hearing protector.

The TRILOGY™ foam ear tips should be regularly inspected for deterioration, cracking, or other damage. The ear tips can be cleaned in between uses with a damp cloth and water. Overtime, the ear tips should be replaced.

WARNINGS
Isotone’s® XTRA 2.0 does an excellent job of blocking outside noise. As such, Isotone’s® XTRA 2.0 should NOT be used in environments where users need to be fully aware of their surroundings for personal safety reasons. For example, do NOT use them while driving a car or riding a motorcycle. Similarly, do NOT use them when riding a bicycle outside. The user is solely responsible for ensuring that Isotone’s® XTRA 2.0 is used ONLY in safe environments.
This product may be adversely affected by certain chemical substances. Further information may be sought from the manufacturer.
These earplugs should not be used where the risk that the connecting cord could be caught up during use.

Recommendations
The wearer should ensure the product is properly cleaned and dry before and after use. Storage should be in a clean and dry location between -20°C and 50°C.
The battery should not be fully discharged before long term storage.
The wearer should ensure that:

  • The hearing protector is fitted, adjusted, and maintained in accordance with the manufacturer’s instructions.
  •  The hearing protector is worn at all times in noisy surroundings.
  • The hearing protector is regularly inspected for serviceability.

If these recommendations are not adhered to, the protection afforded by the hearing protector will be severely impaired.
Additional Notes
Isotone’s® XTRA 2.0 is compliant with Bluetooth® V5. We do not guarantee compatibility of all functions on every Bluetooth®-enabled device. Please check your device’s user manual for compatibility and functionality.
For additional information or questions about Isotone’s® products or spares and accessories, please contact our support team.
Mean Mass: About 24 g
Date of Obsolescence: 3 years from purchase date Not to be used in Explosive Atmospheres
The Carry Case provided is the packaging suitable for transport

Included Ear tip Sizes Nominal Diameter
Extra Small 8-10 mm
Small 8-11 mm
Medium 8-12 mm
Large 9-14 mm

FCC
Caution:
The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the users’ authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

UK & Europe
uk-eurosupport@isotunesaudio.com

North America
support@isotunesaudio.com
1-844-396-3737
Monday-Friday 9-5 ET

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals