Cleverio 47007 Air Purifier User Manual
- June 7, 2024
- Cleverio
Table of Contents
Air Purifier
Item: 47007
Manual
www.cleverio.com
Box 50435 Malmo
Sweden
Version: 2019-11-25
Cleverio®
Overview
Casing
Filters
Aromatherapy sponges
Bottom cover| Speed settings
Child lock
Timer
Filter
---|---
Specifications
| Power supply | AC 220-240 V, 50/60 Hz |
|---|---|
| Power consumption | Max 30 W |
| Volume | 25-50 dB |
| Size | 228 x 228 x 324 mm |
| Weight | 2500 g |
How to use the air purifier
Before use
Before activating the purifier for the first time turn it upside down, twist the bottom cover counterclockwise and remove the bag around the filter. Put it back and close the cover. Insert the power cord in a power socket. Wait 3 seconds until the indicators light up and a buzzer rings. Press the power button to activate the purifier, it’ll start in in the low-speed setting.
Child lock
There is a child lock feature on the device that can be activated by pressing and holding the lock button for 3 seconds. The button light should thereafter turn off which will indicate that it is active, the other buttons will be unresponsive until the child lock is turned off (repeat the process).
Timer
You can activate a timer for the purifier so it automatically turns off after a set time. Press the button (bottom one) to activate it. The following times are 1, 2, 4 or 8 hours, keep pressing the button to alternate between times.
Air quality
The built-in light inside the purifier will change color according to the current air quality. Blue means excellent air quality, green means good, purple means subpar, and red means the air quality is poor. The light itself can be turned off by pressing the filter button (right one).
Filter
The button to the right will light up and indicate that the filter needs to be replaced. This will occur after the purifier has been active for around 2000 hours. The button will blink and a beep will be heard as well. After replacing the filter you must press and hold the button for a few seconds to reset the timer. Make sure the purifier is turned off before switching the filter. Turn the purifier upside down and open the bottom lid by turning it counterclockwise. Remove the filter and replace with a new one (sold separately).
Aromatherapy
There are two perfume sponges inside the purifier that you can give a preferred scent which will be spread in the room thanks to the device. To reach the sponges make sure the device is turned off, turn it around and open the bottom lid by turning it counterclockwise. The sponges are secured inside the cover.
Mobile app
Find and install the ‘Cleverio’ app on App Store or the Google Play store depending on what device you are using. Register an account in the app to be able to proceed. Make sure you are connected to your local network.
You have to press and hold the fan button for 5 seconds on the purifier to activate it’s pairing mode. Press ‘Add Device’ in the app and choose ‘air purifier’ from the list. Enter the details for your network in the next step. Wait for the purifier to connect. A prompt will display if the connection was successful. You can now control the device in your app.
If you want to sync the device to Amazon Echo, Google Home or other services press ‘Me’ in the app, then ‘More services’ and choose the service of your choice and follow the steps.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>