mitzi HL556201 Barbie Table Lamp Instruction Manual
- June 5, 2024
- mitzi
Table of Contents
**mitzi HL556201 Barbie Table Lamp Instruction Manual
**
OVERVIEW
| ITEM | DESCRIPTION | PART NUMBER |
|---|---|---|
| 1 | FIXTURE ASSEMBLY | FAS-HL556201 |
| 2 | SHADE | SHD-HL556201 |
| 3 | SOCKET RING | RNG-HL556201 |
| 4 | BULB | NOT INCLUDED |
WARNING/CAUTION
- DISCONNECT POWER BEFORE RE-LAM PING OR WIRING THE FIXTURE. READ ALL INSTRUCTIONS COMPLETELY BEFORE STARTING INSTALLATION.
- TO AVOID THE RISK OF FIRE OR SHOCK, FIXTURE MUST BE INSTALLED IN COMPLIANCE WITH ALL APPLICABLE NATIONAL AND LOCAL ELECTRICAL/BUILDING CODES. THE INSTALLATION AND MAINTENANCE OF THIS UNIT SHOULD BE COMPLETED BY A LICENSED ELECTRICIAN OR CERTIFIED FACTORY TRAINED TECHNICIAN.
- CALIFORNIA PROP 65: THIS LIGHTING FIXTURE CONTAINS CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS, AND/OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER USE.
- REMOVE THE FIXTURE, PARTS AND PARTS BAG(S) FROM THE CARTON. BEFORE DISCARDING THE CARTON, DOUBLE CHECK TO MAKE CERTAIN THAT ALL PARTS ARE FOUND. INSPECT THE FIXTURE PRIOR TO INSTALLATION FOR ANY DAMAGE TO THE FIXTURE.
- DIMMING: THE FIXTURE CAN BE CONTROLLED BY A WALL DIMMING DEVICE. ONLY USE TRIAC/ELECTRONIC DIMMER. MAKE SURE THE CARTON IS MARKED FOR USE WITH LED COMPACT FLUORESCENT-INCANDESCENT LIGHT SOURCE ONLY. THESE CAN BE PROVIDED BY YOUR LOCAL ELECTRICAL DISTRIBUTOR, HOME CENTER, OR HARDWARE STORE.
- PLEASE CLEAN WITH A SOFT, DRY CLOTH ONLY! DO NOT USE CLEANSERS
FIXTURE INSTALLATION
- Carefully remove the protective covering over on the SHADE (2), place the SHADE (2) onto the FIXTURE ASSEMBLY (1) and secure with the SOCKET RING(3).
- Install the BULB (4) into the socket.THIS FIXTURE IS RATED FOR 60 WATT LAMP. DO NOT EXCEED THE RECOMMENDED WATTAGE!
- Plug the cord into the wall outlet. Turn the switch on the cord.
Questions? We’re here to help! Contact us at CustomerService@hvlgroup.com
References
Read User Manual Online (PDF format)
Loading......